Английская Википедия:Abbey Mills Pumping Station

Материал из Онлайн справочника
Версия от 19:14, 27 декабря 2023; EducationBot (обсуждение | вклад) (Новая страница: «{{Английская Википедия/Панель перехода}} {{Use dmy dates|date=June 2015}} {{Infobox building | name = Abbey Mills Pumping Station | native_name = | native_name_lang = | logo = | logo_size = | logo_alt = | logo_caption = | image = Abbey Mills Pumping Station main building (1) - 2022-04-03.jpg | image_size = | image_alt = |...»)
(разн.) ← Предыдущая версия | Текущая версия (разн.) | Следующая версия → (разн.)
Перейти к навигацииПерейти к поиску

Шаблон:Use dmy dates Шаблон:Infobox building

Abbey Mills Pumping Station is a sewage pumping station in Mill Meads, East London, operated by Thames Water. The pumping station lifts sewage from the London sewerage system into the Northern Outfall Sewer and the Lee Tunnel, which both run to Beckton Sewage Treatment Works.

The original pumping station, designed by engineer Joseph Bazalgette, Edmund Cooper, and architect Charles Driver, was built between 1865 and 1868, housing eight beam engines by Rothwell & Co. of Bolton. Two engines on each arm of a cruciform plan, with an elaborate Byzantine style, described as The Cathedral of Sewage.[1] Another of Bazalgette's designs, Crossness Pumping Station, is located south of the River Thames at Crossness, at the end of the Southern Outfall Sewer.

A modern sewage pumping station (Station F) was completed in 1997[2] about Шаблон:Convert south of the original station.

History

The pumping station was built at the site of an earlier watermill owned by the former Stratford Langthorne Abbey, from which it gained the name "Abbey Mills".[3] It was first recorded as Wiggemulne in 1312, i.e., "the mill of a man called Wicga", an Old English personal name, and subsequently became associated with the abbey.[4] The abbey lay between the Channelsea River and Marsh Lane (Manor Road). It was dissolved in 1538. By 1840, the North Woolwich Railway ran through the site, and it began to be used to establish factories, and ultimately the sewage pumping stations.[5]

Purpose

Abbey Mills Pumping Station was constructed to lift sewage between the two Low Level Sewers and the Northern Outfall Sewer, which was built in the 1860s to carry the increasing amount of sewage produced in London away from the centre of the city to the sewage treatment plant at Beckton.

Details of the pumps in the year 1912/13 were as follows:[6]

Abbey Mills pumps (1912/13)
Pump Sewage pumped, million gallons Average lift, ft Working costs
Beam engines 34,100 36.69 £19,801
Worthington engines 6,215 40.56 £6,234

The pumping capability was increased with the addition of gas engine driven pumps. Details of the operation of the pumps in the year 1919/20 were as follows:[7]

Abbey Mills pumps (1919/20)
Pump Sewage pumped, million gallons Average lift, ft Working costs
Beam engines 35,604.8 35.48 £46,767
Worthington engines 5,921.5 38.34 £16,117
Gas engines 3,209.4 39.66 £13,284

Two Moorish styled chimneys – unused since steam power had been replaced by electric motors in 1933 – were demolished in 1941, as it was feared that a strike from German bombs might topple them onto the pumping station.

The building still houses electric pumps – to be used to assist the new facility next door when required.

The main building is Grade II* listed and there are many Grade II-listed ancillary buildings, including the stumps of the demolished chimneys.

Modern pumping station

Файл:Abbey Mills Pumping Station F - 2023-08-20.jpg
The modern Abbey Mills Pumping Station (Station F)

The modern pumping station (Station F) was designed by architects Allies and Morrison. The original building (Station A) has electrical pumps and these are used to assist the modern pumping station during high flows if required. It is one of the three principal London pumping stations dealing with foul water. Both pumping stations are able to discharge flows directly into the Lee Tunnel.

Lee Tunnel

Шаблон:Main

The Lee Tunnel is a sewage tunnel that runs from Abbey Mills to Beckton Sewage Treatment Works and is designed to handle the 16 million tons of overflow sewage that was previously discharged into the River Lea each year at Abbey Mills, as well as the additional wastewater brought to Abbey Mills by the Thames Tideway tunnel. Construction of the Lee Tunnel began in 2012 and it was opened for service in early 2016.[8][9]

Thames Tideway Scheme

Шаблон:Main

Abbey Mills is the endpoint of the main Thames Tideway tunnel, where sewage will be transferred into the Lee Tunnel and onwards to Beckton for treatment. Both the Lee Tunnel and the main Thames Tideway tunnel also serve as storage reservoirs to store wastewater during heavy rainfall.

Gallery

References

Шаблон:Reflist

External links

Шаблон:Thames Water

Партнерские ресурсы
Криптовалюты
Магазины
Хостинг
Разное

  1. ↑ Шаблон:Cite news
  2. ↑ Шаблон:Cite web
  3. ↑ Шаблон:Cite web
  4. ↑ Шаблон:Cite book
  5. ↑ West Ham: Stratford Abbey, A History of the County of Essex: Volume 6 (1973), pp. 112–14. Retrieved 20 February 2007
  6. ↑ Шаблон:Cite book
  7. ↑ Шаблон:Cite book
  8. ↑ Шаблон:Cite web
  9. ↑ Шаблон:Cite news
Источник — http://wikihandbk.com/ruwiki/index.php?title=Английская_Википедия:Abbey_Mills_Pumping_Station&oldid=12905865