Английская Википедия:Bavarian S 3/5

Материал из Онлайн справочника
Версия от 05:19, 7 февраля 2024; EducationBot (обсуждение | вклад) (Новая страница: «{{Английская Википедия/Панель перехода}} {{more citations needed|date=January 2015}} {{Infobox locomotive | name = Bavarian S 3/5 N <br />DRG Class 17.4 | bgcolor = 0081FF | color = FFFFFF | image = S 3-5.jpg | caption = Bavarian S 3/5 Nr. 3303 | builder = Maffei | builddate = 1903–1907 | totalproduction = 39 | whytetype = 4-6...»)
(разн.) ← Предыдущая версия | Текущая версия (разн.) | Следующая версия → (разн.)
Перейти к навигацииПерейти к поиску

Шаблон:More citations needed Шаблон:Infobox locomotive The Class S 3/5 engines of the Royal Bavarian State Railways (Königlich Bayerische Staatsbahn) were express train steam locomotives with a 4–6–0 wheel arrangement.

Saturated steam variant

Between 1903 and 1907 Maffei delivered three batches of 39 locomotives in all. They had a four-cylinder, saturated steam compound engine. Unlike their forerunners, the Bavarian Class C V, the inside high-pressure cylinders and the outside low-pressure cylinders were angled and worked on the first coupled axle.

From the second series, built in 1904, the boiler pressure of the S 3/5 was raised from Шаблон:Convert. The tube lengths and diameter of the inside cylinders were also changed.

The S 3/5 engines built from 1904 were technically closely related to the S 2/5 which was being developed in parallel. The two classes only differed in their wheel arrangement and the larger coupled wheel diameter on the S 2/5; the boiler and running gear were the same and thus also their output power. Even the permitted top speed was identical on both classes (Шаблон:Convert). The S 3/5 N engines were, in terms of tractive effort (Шаблон:Convert at Шаблон:Convert), clearly superior to the S 2/5, because they had three driven axles. S 3/5 locomotives were stabled in the locomotive workshops at Munich I and Nuremberg.

The locomotives were coupled with Bavarian 2'2' T 21 and 2'2' T 21,8 tenders.

Superheated steam variant

Шаблон:Infobox locomotive For the 1906 Bavarian State Exhibition in Nuremberg, Maffei fitted locomotive no. 3329 experimentally with a Schmidt superheater. In addition the bore of the cylinders was increased to Шаблон:Convert/Шаблон:Convert. These measures produced a significant improvement in locomotive performance (Шаблон:Convert on the level at Шаблон:Convert), so that from 1908 the Bavarian state railways only ordered the superheated S 3/5 H.

Although the more powerful S 3/6 express locomotive had been available since 1908, the number of S 3/5 H engines had climbed to 30 by 1911, partly because there was insufficient funding for the expensive S 3/6. As a result, the overall number of S 3/5 engines was 69.

Reichsbahn

After World War I, 19 saturated steam and 6 superheated steam locomotives had to be transferred abroad. Seventeen of those went to the French Eastern Railway, five to the AL and two to the Belgian state railway. Locomotive no. 3333 was left in Poland after the war and was numbered by the PKP as Шаблон:Not a typo.

The Deutsche Reichsbahn took over the remaining 20 saturate steam engines as Class 17.4 (17 401–420) and had them converted to superheated locomotives in 1925. The remaining 24 superheated engines became Class 17.5 (17 501–524). In the meantime the S 3/5 was mainly used on passenger train duties in the Reichsbahndirektionen of Augsburg and Nuremberg, because enough modern express engines were now available.

The Reichsbahn began to retire the locomotives as early as 1932. Initially the older, former saturated steam engines disappeared, only eight examples remaining after the Second World War; whilst at the same time 21 of the former S 3/5 H locomotives were still working. All the engines were in Bavaria by the end of the war, but were heavily worn out and no longer ran in regular service. Both variants were finally retired by 1948.

See also

Sources

Шаблон:Bavarian locomotives