Английская Википедия:Hiller OH-23 Raven

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:Redirect-synonym Шаблон:More footnotes

The Hiller OH-23 Raven is a three-place, military light observation helicopter based on the Hiller Model 360. The Model 360 was designated by the company as the UH-12 ("UH" for United Helicopters),[1] which was first flown in 1948. A Hiller UH-12 was the first helicopter to make a transcontinental flight across the USA, in 1949.

Development

In 1947, United Helicopters (later renamed Hiller Aircraft) developed the prototype Model 360X helicopter. A year later, on 14 October 1948 the Civil Aeronautics Authority (CAA) issued a production certificate for the Model 360. United Helicopters began producing the Model 360 as the UH-12. In 1949, the UH-12 became the first helicopter to make a transcontinental flight from California to New York. When Hiller upgraded the engine and the rotor blades, the company designated the new model as the UH-12A. The UH-12A would be adopted by both the French and United States militaries, as well as being used by civil commercial operators in several countries.

It was produced until 1965, with over 2000 produced.[2]

Operational history

The H-23 Raven performed as a utility, observation, and MedEvac helicopter during the Korean War. Model numbers ranged A through D, F and G. The H-23A had a sloping front windshield. The H-23B was used as a primary helicopter trainer. Beginning with the UH-23C, all later models featured the "Goldfish bowl" canopy similar to the Bell 47.

The Raven used Hiller's "Rotor-Matic" cyclic control system, with two small servo rotor paddles offset 90 degrees to the main rotor blades. The paddles were attached to the control column, so that movement of the column would cause the pitch of the servo paddles to change, loading the main rotor blade so that the desired cyclic changes to the rotor occurred.[3] The OH-23 had a top speed of Шаблон:Cvt. The Raven had a two-bladed main rotor, a metal two-bladed tail rotor. Both the OH-23B and the OH-23C were powered by one Franklin O-335-5D engine.

The OH-23D was a purely military version with a Lycoming O-435-23C engine and a more reliable transmission. Most OH-23Ds were replaced by the OH-23G, the most common version of the Raven, with a more powerful Lycoming O-540-9A six-cylinder, horizontally opposed, air-cooled Шаблон:Cvt engine. The OH-23G could seat three. The MEDEVAC version carried two external skid-mounted litters or pods. The Raven saw service as a scout during the early part of the Vietnam War before being replaced by the Hughes OH-6A Cayuse in early 1968. A Raven piloted by Hugh Thompson, Jr. played a crucial role in curtailing the My Lai Massacre.[4] When a Raven of the 59th Aviation Company strayed north of the Korean DMZ in August 1969 it was shot down and the crew were kept prisoner until released on December 2.[5]

The Raven could be armed with twin M37C .30-caliber machine guns on the XM1 armament subsystem or twin M60C 7.62 mm machine guns on the M2 armament subsystem. The XM76 sighting system was used for aiming the guns.

The Royal Navy's No. 705 Training Squadron used Hiller HTE-2s for several years from 1953 and later operated Hiller 12E's for many further years as its basic helicopter trainer based at RNAS Culdrose located in Cornwall, England.

Variants

Файл:Hiller HT.1 XB474 FAA Stretton 25.07.53 edited-2.jpg
Royal Navy Hiller HTMk1 (HTE-2) of 705 Squadron in 1953
Файл:Hiller UH-12 (H-23) bw.jpg
U.S. Army H-23B Raven
Файл:Hiller UH-12A G-ANOC Fison-Awk RWY 09.07.55 edited-2.jpg
Hiller UH-12A in 1955 when used as a crop spraying demonstrator in England

Military

YH-23
One Model UH-12A, modified with two-seat cabin and 178 hp Franklin engine for U.S. Army evaluation.[6]
H-23A
Initial production version with 178 hp (133 kW) Franklin O-335-4 piston engine and two-seat cockpit, 100 built for the U.S. Army[7] and 5 for evaluation by the U.S. Air Force.[8]
H-23B
H-23A with skid/wheel undercarriage and 200 hp (149 kW) O-335-6 engine (some later re-engined with a 250 hp VO-435-23B), re-designated OH-23B in 1962, 273 built for the U.S. Army[7] and 81 for military export.
H-23C
Model UH-12C with three-seat cabin, one-piece canopy and metal rotor blades, 145 built for the U.S. Army. Re-designated OH-23C in 1962.[7]
H-23D
H-23C with new rotor, transmission and 250 hp (187 kW) Lycoming VO-435-23B engine, 348 built for U.S. Army. Re-designated OH-23D in 1962.[7]
H-23E
Model UH-12E, not bought
H-23F
Model UH-12E-4, four-seat model with 25-inch cabin extension and a 305 hp VO-540-A1B engine, redesignated OH-23F in 1962, 22 built for U.S. Army.[7]
H-23G
Three-seat dual control version of H-23F, redesignated OH-23G in 1962, 793 built.[7]
HTE-1
U.S. Navy version of the Model UH-12A with Franklin O-335 engine, two-seater with dual controls, and wheeled tricycle undercarriage, 17 built.[9]
HTE-2
U.S. Navy version of H-23B with Franklin O-335-6 engine, 35 built.[9][10]
Hiller HT Mk 1
Royal Navy designation for 20 former U.S. Navy HTE-2s.[11]
Hiller HT Mk 2
UH-12Es for Royal Navy. 21 supplied.[11]
CH-112 Nomad
Canadian military designation for the UH-12Es.

Civilian

UH-12A
Original production model for the U.S. Army, powered by a six cylinder fan-cooled Franklin 6V4-178-B33 engine with a maximal power of 178hp at 3000 rpm. The main rotor blades (produced by the Parsons Industries Inc.) are of solid wood laminations. The body of the blade is in fact essentially made up of numerous strip and block wooden laminations designed to provide a strong but highly flexible blade. The entire blade surface is covered with fiberglass cloth with the leading edge covered with an additional stainless steel sheet. The tail rotor is of all metal construction.
UH-12B (HTE-2)
Training version for the U.S. Navy. U.S. Navy designation HTE-2 prior to 1962.
UH-12C
Three-seat version, equipped with wood rotor blades and one-piece 'goldfish bowl' canopy. U.S. Army designation H-23C.
UH-12D
Improved version of the H-23C for the U.S. Army. U.S. Army designation H-23D.
UH-12E
Three-seat dual-control version of the H-23D.
UH-12ET
Turbine-powered version of the UH-12E, fitted with an Allison 250 turboshaft engine.
UH-12E-3
New three-seat production version.
UH-12E-3T
New turbine-powered production version.
Файл:Hiller SE-HHU.jpg
Hiller UH-12E-4, four seater
UH-12E-4
Four-seat civilian version (pilot in front, with back seat for three passengers). United States Army designation H-23F. VO-540 powered. Conversion kit available for E-12 models.[12]
UH-12E-4T
Four-seat turbine-powered production version.
UH-12L-4
Lengthened version with wider cabin windows.

Operators

Шаблон:ARG
Шаблон:BOL
Шаблон:CAN
Шаблон:CHL
Шаблон:COL
Шаблон:DOM
Шаблон:FRA
Шаблон:FRG
Шаблон:GTM
Шаблон:IDN
Шаблон:ISR
Файл:Hiller OH23 IDF Air Force1952.jpg
Israeli Air Force H-23A (model UH-12A), Jerusalem 1952
Шаблон:MEX
Шаблон:NLD
Шаблон:PRY
Шаблон:PER
Шаблон:Flag
Шаблон:THA
Шаблон:GBR
Шаблон:USA
Шаблон:URY

Specifications (H-23D)

3-view line drawing of the Hiller H-23 Raven
3-view line drawing of the Hiller H-23 Raven

Шаблон:Aircraft specs

See also

Шаблон:Portal Шаблон:Aircontent

References

Шаблон:Reflist

Bibliography

External links

Шаблон:Commons

Шаблон:Hiller aircraft Шаблон:US helicopters Шаблон:USN helicopters Шаблон:Canadian Forces aircraft Шаблон:Thai helicopter designations Шаблон:Spanish helicopters