Английская Википедия:Atkinson index

Материал из Онлайн справочника
Версия от 22:56, 3 февраля 2024; EducationBot (обсуждение | вклад) (Новая страница: «{{Английская Википедия/Панель перехода}} The '''Atkinson index''' (also known as the '''Atkinson measure''' or '''Atkinson inequality measure''') is a measure of income inequality developed by British economist Anthony Barnes Atkinson. The measure is useful in determining which end of the distribution contributed most to the observed inequality.<ref>''inter alia'' [https://www.census.gov/prod/2011pubs/p60-239.pdf...»)
(разн.) ← Предыдущая версия | Текущая версия (разн.) | Следующая версия → (разн.)
Перейти к навигацииПерейти к поиску

The Atkinson index (also known as the Atkinson measure or Atkinson inequality measure) is a measure of income inequality developed by British economist Anthony Barnes Atkinson. The measure is useful in determining which end of the distribution contributed most to the observed inequality.[1]

Definition

The index can be turned into a normative measure by imposing a coefficient <math>\varepsilon</math> to weight incomes. Greater weight can be placed on changes in a given portion of the income distribution by choosing <math>\varepsilon</math>, the level of "inequality aversion", appropriately. The Atkinson index becomes more sensitive to changes at the lower end of the income distribution as <math>\varepsilon</math> increases. Conversely, as the level of inequality aversion falls (that is, as <math>\varepsilon</math> approaches 0) the Atkinson becomes less sensitive to changes in the lower end of the distribution. The Atkinson index is for no value of <math>\varepsilon</math> highly sensitive to top incomes because of the common restriction that <math>\varepsilon</math> is nonnegative.[2]

The Atkinson <math>\varepsilon</math> parameter is often called the "inequality aversion parameter", since it regulates the sensitivity of the implied social welfare losses from inequality to income inequality as measured by some corresponding generalised entropy index. The Atkinson index is defined in reference to a corresponding social welfare function, where mean income multiplied by one minus the Atkinson index gives the welfare equivalent equally distributed income. Thus the Atkinson index gives the share of current income which could be sacrificed, without reducing social welfare, if perfect inequality were instated. For <math>\varepsilon=0</math>, (no aversion to inequality), the marginal social welfare from income is invariant to income, i.e. marginal increases in income produce as much social welfare whether they go to a poor or rich individual. In this case, the welfare equivalent equally distributed income is equal to mean income, and the Atkinson index is zero.

For <math>\varepsilon=+\infty</math> (infinite aversion to inequality) the marginal social welfare of income of the poorest individual is infinitely larger than any even slightly richer individual, and the Atkinson social welfare function is equal to the smallest income in the sample. In this case, the Atkinson index is equal to mean income minus the smallest income, divided by mean income. As in large typical income distributions incomes of zero or near zero are common, the Atkinson index will tend to be one or very close to one for very large <math>\varepsilon</math>.

The Atkinson index then varies between 0 and 1 and is a measure of the amount of social utility to be gained by complete redistribution of a given income distribution, for a given <math>\varepsilon</math> parameter. Under the utilitarian ethical standard and some restrictive assumptions (a homogeneous population and constant elasticity of substitution utility), <math>\varepsilon</math> is equal to the income elasticity of marginal utility of income.


The Atkinson index is defined as:

<math>A_\varepsilon(y_1,\ldots,y_N)=

\begin{cases} 1-\frac{1}{\mu}\left(\frac{1}{N}\sum_{i=1}^{N}y_{i}^{1-\varepsilon}\right)^{1/(1-\varepsilon)} & \mbox{for}\ 0 \leq \varepsilon \neq 1 \\ 1-\frac{1}{\mu}\left(\prod_{i=1}^{N}y_{i}\right)^{1/N} & \mbox{for}\ \varepsilon=1 \\ 1-\frac{1}{\mu}\min \left(y_1,...,y_N\right) & \mbox{for}\ \varepsilon=+\infty \end{cases} </math>

where <math>y_{i}</math> is individual income (i = 1, 2, ..., N) and <math>\mu</math> is the mean income.

In other words, the Atkinson index is the complement to 1 of the ratio of the Hölder generalized mean of exponent 1−ε to the arithmetic mean of the incomes (where as usual the generalized mean of exponent 0 is interpreted as the geometric mean).

Atkinson index satisfies the following properties:

  1. The index is symmetric in its arguments: <math>A_\varepsilon(y_1,\ldots,y_N)=A_\varepsilon(y_{\sigma(1)},\ldots,y_{\sigma(N)})</math> for any permutation <math>\sigma</math>.
  2. The index is non-negative, and is equal to zero only if all incomes are the same: <math>A_\varepsilon(y_1,\ldots,y_N) = 0</math> iff <math>y_i = \mu</math> for all <math>i</math>.
  3. The index satisfies the principle of transfers: if a transfer <math>\Delta>0</math> is made from an individual with income <math>y_i</math> to another one with income <math>y_j</math> such that <math>y_i - \Delta > y_j + \Delta</math>, then the inequality index cannot increase.
  4. The index satisfies population replication axiom: if a new population is formed by replicating the existing population an arbitrary number of times, the inequality remains the same: <math>A_\varepsilon(\{y_1,\ldots,y_N\},\ldots,\{y_1,\ldots,y_N\})=A_\varepsilon(y_1,\ldots,y_N)</math>
  5. The index satisfies mean independence, or income homogeneity, axiom: if all incomes are multiplied by a positive constant, the inequality remains the same: <math>A_\varepsilon(y_1,\ldots,y_N) = A_\varepsilon( ky_1,\ldots,ky_N)</math> for any <math>k>0</math>.
  6. The index is subgroup decomposable.[3] This means that overall inequality in the population can be computed as the sum of the corresponding Atkinson indices within each group, and the Atkinson index of the group mean incomes:
<math>

A_\varepsilon(y_{gi}: g=1,\ldots,G, i=1,\ldots,N_g) = \sum_{g=1}^G w_g A_\varepsilon( y_{g1}, \ldots, y_{gN_g}) + A_\varepsilon(\mu_1, \ldots, \mu_G) </math>

where <math>g</math> indexes groups, <math>i</math>, individuals within groups, <math>\mu_g</math> is the mean income in group <math>g</math>, and the weights <math>w_g</math> depend on <math>\mu_g, \mu, N</math> and <math>N_g</math>. The class of the subgroup-decomposable inequality indices is very restrictive. Many popular indices, including Gini index, do not satisfy this property.

See also

Footnotes

  1. inter alia "Income, Poverty, and Health Insurance Coverage in the United States: 2010", U.S. Census Bureau, 2011, p.10
  2. The Atkinson index is related to the generalized entropy (GE) class of inequality indexes by <math>\epsilon=1-\alpha</math> - i.e an Atkinson index with high inequality aversion is derived from a GE index with small <math>\alpha</math>. GE indexes with large <math>\alpha</math> are sensitive to the existence of large top incomes but the corresponding Atkinson index would have negative <math>\varepsilon</math>. For a hypothetical Atkinson index with <math>\epsilon</math> being negative, the implied social utility function would be convex in income, and the Atkinson index would be nonpositive.
  3. Shorrocks, AF (1980). The class of additively decomposable inequality indices. Econometrica, 48 (3), 613–625, Шаблон:Doi

References

External links

Software:

  • Free Online Calculator computes the Gini Coefficient, plots the Lorenz curve, and computes many other measures of concentration for any dataset
  • Free Calculator: Online and downloadable scripts (Python and Lua) for Atkinson, Gini, and Hoover inequalities
  • Users of the R data analysis software can install the "ineq" package which allows for computation of a variety of inequality indices including Gini, Atkinson, Theil.
  • A MATLAB Inequality Package Шаблон:Webarchive, including code for computing Gini, Atkinson, Theil indexes and for plotting the Lorenz Curve. Many examples are available.
  • Stata inequality packages: ineqdeco to decompose inequality by groups; svygei and svyatk to compute design-consistent variances for the generalized entropy and Atkinson indices; glcurve to obtain generalized Lorenz curve. You can type ssc install ineqdeco etc. in Stata prompt to install these packages.