Английская Википедия:Bar (unit)
Шаблон:Short description Шаблон:Other uses Шаблон:Infobox unit
The bar is a metric unit of pressure defined as 100,000 Pa (100 kPa), though not part of the International System of Units (SI). A pressure of 1 bar is slightly less than the current average atmospheric pressure on Earth at sea level (approximately 1.013 bar).[1][2] By the barometric formula, 1 bar is roughly the atmospheric pressure on Earth at an altitude of 111 metres at 15 °C.
The bar and the millibar were introduced by the Norwegian meteorologist Vilhelm Bjerknes, who was a founder of the modern practice of weather forecasting, with the bar defined as one megadyne per square centimeter.[3]
The SI brochure, despite previously mentioning the bar,Шаблон:Fact now omits any mention of it.[1] The bar has been legally recognised in countries of the European Union since 2004.[2] The US National Institute of Standards and Technology (NIST) deprecates its use except for "limited use in meteorology" and lists it as one of several units that "must not be introduced in fields where they are not presently used".[4] The International Astronomical Union (IAU) also lists it under "Non-SI units and symbols whose continued use is deprecated".[5]
Units derived from the bar include the megabar (symbol: Mbar), kilobar (symbol: kbar), decibar (symbol: dbar), centibar (symbol: cbar), and millibar (symbol: mbar).
Definition and conversion
The bar is defined using the SI derived unit, pascal: Шаблон:Val ≡ 100,000 Pa ≡ 100,000 N/m2.
Thus, Шаблон:Val is equal to:
and 1 bar is approximately equal to:
- Шаблон:Convert
- Шаблон:Convert
- Шаблон:Convert
- Шаблон:Convert
- Шаблон:Convert
- 1019.716 centimetres of water (cmH2O) (1 bar approximately corresponds to the gauge pressure of water (not absolute) at a depth of 10 meters).
Notes:
- 1 millibar (mbar) = 1 one-thousandth bar, or Шаблон:Val
- 1 millibar = 1 hectopascal (1 hPa = 100 Pa).
Origin
The word bar has its origin in the Ancient Greek word Шаблон:Lang (Шаблон:Transl), meaning weight. The unit's official symbol is bar;Шаблон:Fact the earlier symbol b is now deprecated and conflicts with the uses of b denoting the unit barn or bit, but it is still encountered, especially as mb (rather than the proper mbar) to denote the millibar. Between 1793 and 1795, the word bar was used for a unit of weight in an early version of the metric system.[6]
Usage
Atmospheric air pressure where standard atmospheric pressure is defined as 1013.25 mbar, 101.325 kPa, 1.01325 bar, which is about Шаблон:Convert. Despite the millibar not being an SI unit, meteorologists and weather reporters worldwide have long measured air pressure in millibars as the values are convenient. After the advent of SI units, some meteorologists began using hectopascals (symbol hPa) which are numerically equivalent to millibars; for the same reason, the hectopascal is now the standard unit used to express barometric pressures in aviation in most countries. For example, the weather office of Environment Canada uses kilopascals and hectopascals on their weather maps.[7][8] In contrast, Americans are familiar with the use of the millibar in US reports of hurricanes and other cyclonic storms.[9][10]
In fresh water, there is an approximate numerical equivalence between the change in pressure in decibars and the change in depth from the water surface in metres. Specifically, an increase of 1 decibar occurs for every 1.019716 m increase in depth. In sea water with respect to the gravity variation, the latitude and the geopotential anomaly the pressure can be converted into metres' depth according to an empirical formula (UNESCO Tech. Paper 44, p. 25).[11] As a result, decibars are commonly used in oceanography.
In scuba diving, bar is also the most widely used unit to express pressure, e.g. 200 bar being a full standard scuba tank, and depth increments of 10 metre of seawater being equivalent to 1 bar of pressure.
Many engineers worldwide use the bar as a unit of pressure because, in much of their work, using pascals would involve using very large numbers. In measurement of vacuum and in vacuum engineering, residual pressures are typically given in millibar, although torr or millimeter of mercury (mmHg) were historically common.
Pressures resulting from deflagrations are often expressed in units of bars.[12]
In the automotive field, turbocharger boost is often described in bars outside the United States. Tire pressure is often specified in bars. In hydraulic machinery components are rated to the maximum system oil pressure, which is typically in hundreds of bars. For example, 300 bars is common for industrial fixed machinery.
Unicode has characters for "mb" (Шаблон:Unichar) and "bar" (Шаблон:Unichar), but they exist only for compatibility with legacy Asian encodings and are not intended to be used in new documents.
The kilobar, equivalent to 100 MPa, is commonly used in geological systems, particularly in experimental petrology.
The abbreviations "bar(a)" and "bara" are sometimes used to indicate absolute pressures, and "bar(g)" and "barg" for gauge pressures. This usage is deprecated and fuller descriptions such as "gauge pressure of 2 bars" or "2-bar gauge" are recommended.[2][13]
See also
- Centimetre or millimetre of water
- Шаблон:Section link
- List of metric units
- Metric prefix
- Шаблон:Section link
References
External links
- Official SI website: Table 8. Non-SI units accepted for use with the SI
- US government atmospheric pressure map showing atmospheric pressure in mbar
- ↑ 1,0 1,1 Шаблон:SIbrochure9th.
- ↑ 2,0 2,1 2,2 British Standard BS 350:2004 Conversion Factors for Units.
- ↑ Шаблон:Cite web
- ↑ NIST Special Publication 1038 Шаблон:Webarchive, Sec. 4.3.2; NIST Special Publication 811, 2008 edition Шаблон:Webarchive, Sec. 5.2
- ↑ International Astronomical Union Style Manual. Comm. 5 in IAU Transactions XXB, 1989, Table 6
- ↑ Grave (unit)
- ↑ Шаблон:Cite web
- ↑ Шаблон:Cite web
- ↑ US government atmospheric pressure map
- ↑ The Weather Channel
- ↑ Шаблон:Cite web
- ↑ Шаблон:Cite book
- ↑ Шаблон:Cite web