Английская Википедия:Clohessy–Wiltshire equations
Шаблон:Short description The Clohessy–Wiltshire equations describe a simplified model of orbital relative motion, in which the target is in a circular orbit, and the chaser spacecraft is in an elliptical or circular orbit. This model gives a first-order approximation of the chaser's motion in a target-centered coordinate system. It is used to plan the rendezvous of the chaser with the target.[1][2]
History
Early results about relative orbital motion were published by George William Hill in 1878.[3] Hill's paper discussed the orbital motion of the moon relative to the Earth.
In 1960, W. H. Clohessy and R. S. Wiltshire published the Clohessy–Wiltshire equations to describe relative orbital motion of a general satellite for the purpose of designing control systems to achieve orbital rendezvous.[1]
System Definition
Suppose a target body is moving in a circular orbit and a chaser body is moving in an elliptical orbit. Let <math>x, y, z</math> be the relative position of the chaser relative to the target with <math>x</math> radially outward from the target body, <math>y</math> is along the orbit track of the target body, and <math>z</math> is along the orbital angular momentum vector of the target body (i.e., <math>x,y,z</math> form a right-handed triad). Then, the Clohessy–Wiltshire equations are <math display="block">\begin{aligned} \ddot{x} &= 3n^{2}x + 2n\dot{y} \\ \ddot{y} &= -2n\dot{x} \\ \ddot{z} &= -n^{2}z \end{aligned}</math>where <math display="inline">n = \sqrt{\mu / a^3}</math> is the orbital rate (in units of radians/second) of the target body, <math>a</math> is the radius of the target body's circular orbit, <math>\mu</math> is the standard gravitational parameter,
If we define the state vector as <math>\mathbf{x} = (x, y, z, \dot x, \dot y, \dot z)</math>, the Clohessy–Wiltshire equations can be written as a linear time-invariant (LTI) system,[4] <math display="block"> \dot \mathbf{x} = A\mathbf{x} </math> where the state matrix <math>A</math> is <math display="block"> A = \begin{bmatrix} 0 & 0 & 0 & 1 & 0 & 0 \\ 0 & 0 & 0 & 0 & 1 & 0 \\ 0 & 0 & 0 & 0 & 0 & 1 \\ 3n^2 & 0 & 0 & 0 & 2 n & 0 \\ 0 & 0 & 0 & -2 n & 0 & 0 \\ 0 & 0 & -n^2 & 0 & 0 & 0 \end{bmatrix}. </math>
For a satellite in low Earth orbit, <math> \mu = 3.986 \times 10^{14} \; \mathrm{m^3/s^2}</math> and <math>a = 6,793,137 \; \mathrm{m}</math>, implying <math>n = 0.00113 \; \mathrm{s^{-1}}</math>, corresponding to an orbital period of about 93 minutes.
If the chaser satellite has mass <math>m</math> and thrusters that apply a force <math>F = (F_x, F_y, F_z),</math> then the relative dynamics are given by the LTI control system[4] <math display="block"> \dot \mathbf{x} = A \mathbf{x} + B \mathbf{u} </math> where <math>\mathbf{u} = F / m</math> is the applied force per unit mass and <math display="block"> \boldsymbol{B} = \begin{bmatrix} 0 & 0 & 0 \\ 0 & 0 & 0 \\ 0 & 0 & 0 \\ 1 & 0 & 0 \\ 0 & 1 & 0 \\ 0 & 0 & 1 \end{bmatrix}. </math>
Solution
We can obtain closed form solutions of these coupled differential equations in matrix form, allowing us to find the position and velocity of the chaser at any time given the initial position and velocity.[5]<math display="block">\begin{aligned} \delta\vec{r}(t) &= [\Phi_{rr}(t)]\delta\vec{r_0} + [\Phi_{rv}(t)]\delta\vec{v_0} \\ \delta\vec{v}(t) &= [\Phi_{vr}(t)]\delta\vec{r_0} + [\Phi_{vv}(t)]\delta\vec{v_0} \end{aligned}</math>where:<math display="block">\begin{aligned} \Phi_{rr}(t) &= \begin{bmatrix} 4-3\cos{nt} & 0 & 0 \\ 6(\sin{nt}-nt) & 1 & 0 \\ 0 & 0 & \cos{nt} \end{bmatrix} \\ \Phi_{rv}(t) &= \begin{bmatrix} \frac{1}{n}\sin{nt} & \frac{2}{n}(1-\cos{nt}) & 0 \\ \frac{2}{n}(\cos{nt}-1) & \frac{1}{n}(4\sin{nt}-3nt) & 0 \\ 0 & 0 & \frac{1}{n}\sin{nt} \end{bmatrix} \\ \Phi_{vr}(t) &= \begin{bmatrix} 3n\sin{nt} & 0 & 0 \\ 6n(\cos{nt}-1) & 0 & 0 \\ 0 & 0 & -n\sin{nt} \end{bmatrix} \\ \Phi_{vv}(t) &= \begin{bmatrix} \cos{nt} & 2\sin{nt} & 0 \\ -2\sin{nt} & 4\cos{nt}-3 & 0 \\ 0 & 0 & \cos{nt} \end{bmatrix} \end{aligned} </math>Note that <math>\Phi_{vr}(t) = \dot{\Phi}_{rr}(t)</math> and <math>\Phi_{vv}(t) = \dot{\Phi}_{rv}(t)</math>. Since these matrices are easily invertible, we can also solve for the initial conditions given only the final conditions and the properties of the target vehicle's orbit.
See also
References
Further reading
- Prussing, John E. and Conway, Bruce A. (2012). Orbital Mechanics (2nd Edition), Oxford University Press, NY, pp. 179–196. Шаблон:ISBN
External links
- The Clohessy-Wiltshire Equations of Relative Motion
- Derivation Of Approximate Equations For Solving The Planar Rendezvous Problem
