Английская Википедия:Dehydrogenation

Материал из Онлайн справочника
Версия от 02:54, 26 февраля 2024; EducationBot (обсуждение | вклад) (Новая страница: «{{Английская Википедия/Панель перехода}} {{Short description|Chemical reaction involving the removal of hydrogen}} {{Hatnote|Compare Deprotonation.}} In chemistry, '''dehydrogenation''' is a chemical reaction that involves the removal of hydrogen, usually from an organic molecule. It is the reverse of hydrogenation. Dehydrogenation is important, both as a useful reaction and a serious problem. At it...»)
(разн.) ← Предыдущая версия | Текущая версия (разн.) | Следующая версия → (разн.)
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:Hatnote

In chemistry, dehydrogenation is a chemical reaction that involves the removal of hydrogen, usually from an organic molecule. It is the reverse of hydrogenation. Dehydrogenation is important, both as a useful reaction and a serious problem. At its simplest, it's a useful way of converting alkanes, which are relatively inert and thus low-valued, to olefins, which are reactive and thus more valuable. Alkenes are precursors to aldehydes (Шаблон:Chem2), alcohols (Шаблон:Chem2), polymers, and aromatics.[1] As a problematic reaction, the fouling and inactivation of many catalysts arises via coking, which is the dehydrogenative polymerization of organic substrates.[2]

Enzymes that catalyze dehydrogenation are called dehydrogenases.

Heterogeneous catalytic routes

Styrene

Dehydrogenation processes are used extensively to produce aromatics in the petrochemical industry. Such processes are highly endothermic and require temperatures of 500 °C and above.[1][3] Dehydrogenation also converts saturated fats to unsaturated fats. One of the largest scale dehydrogenation reactions is the production of styrene by dehydrogenation of ethylbenzene. Typical dehydrogenation catalysts are based on iron(III) oxide, promoted by several percent potassium oxide or potassium carbonate.[4]

Шаблон:Chem2

Other alkenes

The cracking processes especially fluid catalytic cracking and steam cracker produce high-purity mono-olefins from paraffins. Typical operating conditions use chromium (III) oxide catalyst at 500 °C. Target products are propylene, butenes, and isopentane, etc. These simple compounds are important raw materials for the synthesis of polymers and gasoline additives.Шаблон:Cn

Oxidative dehydrogenation

Relative to thermal cracking of alkanes, oxidative dehydrogenation (ODH) is of interest for two reasons: (1) undesired reactions take place at high temperature leading to coking and catalyst deactivation, making frequent regeneration of the catalyst unavoidable, (2) thermal dehydrogenation is expensive as it requires a large amount of heat. Oxidative dehydrogenation (ODH) of n-butane is an alternative to classical dehydrogenation, steam cracking and fluid catalytic cracking processes.[5][6]

Formaldehyde is produced industrially by oxidative dehydrogenation of methanol. This reaction can also be viewed as a dehydrogenation using Шаблон:Chem2 as the acceptor. The most common catalysts are silver metal, iron(III) oxide,[7] iron molybdenum oxides [e.g. iron(III) molybdate] with a molybdenum-enriched surface,[8] or vanadium oxides. In the commonly used formox process, methanol and oxygen react at ca. 250–400 °C in presence of iron oxide in combination with molybdenum and/or vanadium to produce formaldehyde according to the chemical equation:[9]

Шаблон:Chem2

Homogeneous catalytic routes

A variety of dehydrogenation processes have been described for organic compounds. These dehydrogenation is of interest in the synthesis of fine organic chemicals.[10] Such reactions often rely on transition metal catalysts.[11][12] Dehydrogenation of unfunctionalized alkanes can be effected by homogeneous catalysis. Especially active for this reaction are pincer complexes.[13][14]

Stoichiometric processes

Dehydrogenation of amines to nitriles using a variety of reagents, such as Iodine pentafluoride (Шаблон:Chem).Шаблон:Cn

In typical aromatization, six-membered alicyclic rings, e.g. cyclohexene, can be aromatized in the presence of hydrogenation acceptors. The elements sulfur and selenium promote this process. On the laboratory scale, quinones, especially 2,3-Dichloro-5,6-dicyano-1,4-benzoquinone (DDQ) are effective.Шаблон:Cn

Файл:DDQ-dehydrogenation.png

Main group hydrides

Файл:DAB secondary path.png
Dehydrogenation of ammonia borane.

The dehydrogenative coupling of silanes has also been developed.[15]

<chem>\mathit{n}\ PhSiH3 -> {}[PhSiH]_\mathit{n}{} + \mathit{n}\ H2</chem>

The dehydrogenation of amine-boranes is related reaction. This process once gained interests for its potential for hydrogen storage.[16]

References

Шаблон:Reflist

Шаблон:Organic reactions Шаблон:Authority control

  1. 1,0 1,1 Шаблон:Cite book
  2. Шаблон:Cite journal
  3. Шаблон:Cite book
  4. Denis H. James William M. Castor, "Styrene" in Ullmann's Encyclopedia of Industrial Chemistry, Wiley-VCH, Weinheim, 2005.
  5. Шаблон:Cite journal
  6. Шаблон:Cite book
  7. Шаблон:Cite journal
  8. Шаблон:Cite journal
  9. Günther Reuss, Walter Disteldorf, Armin Otto Gamer, Albrecht Hilt "Formaldehyde" in Ullmann's Encyclopedia of Industrial Chemistry, 2002, Wiley-VCH, Weinheim. Шаблон:Doi
  10. Шаблон:Cite journal
  11. Шаблон:Cite journal
  12. Шаблон:Cite journal
  13. Шаблон:Cite book
  14. Шаблон:Cite book
  15. Шаблон:Cite journal
  16. Шаблон:Cite journal