Английская Википедия:Ellipse Fuji
Шаблон:Short description Шаблон:Use dmy dates Шаблон:Use British English
The Ellipse Fuji is a French high-wing, single-place, hang glider that was designed and produced by La société Ellipse of Étuz.[1]
Design and development
The Fuji was designed as an intermediate hang glider for local recreational and cross-country flying. Built in four sizes, it is also suitable for adding a motorized harness for powered hang glider operations.[1]
Typical of the series, the Fuji 15 is made from aluminum tubing, with the wing covered in Dacron sailcloth. Its Шаблон:Convert span wing is cable braced from a single kingpost. The nose angle is 122° and the aspect ratio is 6.6:1. The model number indicates the approximate wing area in square metres.[1]
Operational history
The Fuji 15 is used on the DTA Alizés nanotrike and the Electravia Electro Trike.[1]
Variants
- Fuji 13
- Extra-small sized model with a wing area of Шаблон:Convert, wing span of Шаблон:Convert, aspect ratio of 6.3:1 and a pilot hook-in weight range of Шаблон:Convert.[1]
- Fuji 14
- Small sized model with a wing area of Шаблон:Convert, wing span of Шаблон:Convert, aspect ratio of 7.1:1 and a pilot hook-in weight range of Шаблон:Convert.[1]
- Fuji 15
- Medium sized model with a wing area of Шаблон:Convert, wing span of Шаблон:Convert, aspect ratio of 6.6:1 and a pilot hook-in weight range of Шаблон:Convert.[1]
- Fuji 16
- Large sized model with a wing area of Шаблон:Convert, wing span of Шаблон:Convert, aspect ratio of 6.3:1 and a pilot hook-in weight range of Шаблон:Convert.[1]
- Fuji 16 Moteur
- Large sized model, structurally reinforced for motorized flight, with a wing area of Шаблон:Convert, wing span of Шаблон:Convert, aspect ratio of 6.3:1 and a pilot hook-in weight range of Шаблон:Convert.[1]
Specifications (Fuji 16)
References