Английская Википедия:Elm Street Stone Arch Bridge

Материал из Онлайн справочника
Версия от 06:30, 3 марта 2024; EducationBot (обсуждение | вклад) (Новая страница: «{{Английская Википедия/Панель перехода}} {{More citations needed|date=January 2024}} {{Infobox bridge |bridge_name = Elm Street Stone Arch Bridge |native_name = |native_name_lang = |image = Elm Street Stone Arch Bridge, Pine Hill, NY.jpg |image_size = 300px |alt = One side of a short stone arch bridge on a paved road, with a creek flowing through a stone-walled channel underneath. The...»)
(разн.) ← Предыдущая версия | Текущая версия (разн.) | Следующая версия → (разн.)
Перейти к навигацииПерейти к поиску

Шаблон:More citations needed Шаблон:Infobox bridge The Elm Street Stone Arch Bridge is located along that street in Pine Hill, New York, United States. It is a short bridge built over Alton Creek in the early 20th century using stonemasonry techniques and an arch bridge design that had been employed in the Catskills since the 18th century, one. As one of the few extant and intact bridges in that style in the region, it was listed on the National Register of Historic Places in 1996 along with the nearby Mill Street Stone Arch Bridge. It is located in the Pine Hill Historic District.

The bridge is located along Elm Street approximately Шаблон:Convert north of Pine Hill's Main Street. The stonework is still in place along the west side; a modern culvert carries the creek out the east side. A short distance to the north along Elm are the Morton Memorial Library and the former District School No. 14, now home to the Shandaken Historical Society, both also listed on the Register.[1]

Structurally, the bridge is a 12-foot–long (4 m) arch 6 feet (2 m) above the creek level, carrying the paved street. It is built of locally quarried stone using rough voussoirs with a central keystone, anchored in abutments of larger stone courses dressed to allow for tight mortar joints. The spandrel walls are of random coursed stone mortared in place.[1]

In 1897 the Shandaken Town Board approved the construction of the two bridges in Pine Hill. Three years later it hired local mason Matthew G. Thompson to build the bridge for $208 ($Шаблон:Inflation in contemporary dollarsШаблон:Inflation-fn). He employed construction techniques dating to the early 18th century, in which the abutments were built first on a small span, followed by a temporary wooden centering to support the arch. Its interior would be filled with earth or stone, and often waterproofed with coal tar or mortar on the inside of the stonework. On the exterior joints packed as tightly as possible prior to mortaring. The centering would be left in place until the mortar had completely set, which could take weeks.[1]

It is not known when Thompson completed the bridge. It has remained intact and unaltered since its original construction, and is currently maintained by the town.[1]

See also

References

  1. 1,0 1,1 1,2 1,3 Ошибка цитирования Неверный тег <ref>; для сносок NRHP nom не указан текст

Шаблон:National Register of Historic Places in New York Шаблон:NRHP bridges