Английская Википедия:Figure découpée

Материал из Онлайн справочника
Версия от 14:28, 7 марта 2024; EducationBot (обсуждение | вклад) (Новая страница: «{{Английская Википедия/Панель перехода}} {{Short description|Outdoor sculpture by Pablo Picasso}} {{italic title}} {{Infobox artwork | title = Figure découpée | other_language_1 = Dutch | other_title_1 = L'oiseau | wikidata = Q24572909 | image = Figure découpée (DSCF3006) (cropped).jpg | caption = The Amsterdam ''Figure découpée'' in 2013 | artist = Pab...»)
(разн.) ← Предыдущая версия | Текущая версия (разн.) | Следующая версия → (разн.)
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:Italic title Шаблон:Infobox artwork

Figure découpée or L'oiseau (1963, 1964, 1965) is an abstract sculpture by Pablo Picasso: there are a total of three Figure découpée sculptures. There is one located in Vondelpark NL, another on the campus of Massachusetts Institute of Technology in the United States and another is in Helsingborg Sweden. The sculpture is a depiction of a bird, but it is commonly referred to as flat bird, flat fish or fish statue.

Background

Figure découpée is a concrete cut-out sculpture that Pablo Picasso designed in the 1950s. He originally created a series of flying birds and he originally made an example from oil on wood in 1958.[1] The first of the three sculptures was made in 1963 and it stands Шаблон:Cvt, that one was installed at MIT in 1975.[2] The 1963 sculpture was installed in 1975, and is located at the MIT Sloan School of Management, Arthur D. Little Inc., Building (Building E60), Back Courtyard.[1] There is a 1964 version which was cast in the same size and is now in Helsingborg Sweden. In 1965 a third larger version of the piece was cast Шаблон:Cvt and it was installed at the Vondelpark in the Netherlands.[2]

Design

The interior lines in the drawing make up a bird with head and beak both facing right, and the tail to the left. The feet are below, and above the bird's wings are spread. The overall design is made through a process of concrete engraving. First a wooden frame was constructed and filled with dark rock materials and then covered with concrete.[1] The surface of the concrete was then sandblasted following a template and the blasted away material revealed the dark material in the lines on the surface. Picasso was introduced to the process by Norwegian artist Carl Nesjar.[3]

References

Шаблон:Reflist

Шаблон:Commons category Шаблон:Pablo Picasso

  1. 1,0 1,1 1,2 Ошибка цитирования Неверный тег <ref>; для сносок VAC не указан текст
  2. 2,0 2,1 Ошибка цитирования Неверный тег <ref>; для сносок art не указан текст
  3. Ошибка цитирования Неверный тег <ref>; для сносок Cuseum не указан текст