Английская Википедия:GAZ-M1
The GAZ M1 (“Эмка“/”Emka”) was a passenger car produced by the Soviet automaker GAZ between 1936 and 1943, at their plant in Gorky (now Nizhny Novgorod, Russia).
Systematic production ended in 1941, but the factory was able to continue assembling cars from existing inventory of parts and components until 1943. In total, 62,888 GAZ M1 automobiles were produced.
Much of the car’s production period coincided with the Great Patriotic War (World War II), and many, as they were commonly called, Emkas were used by the army as staff cars. Various special versions were produced such as the GAZ M - FAI and BA-20 armoured car models.
The car has subsequently become an icon of its time in Russia, having been relatively popular, and featuring in film and photographic images of a defining period in the history of the Soviet Union.
Background
The Soviet Union’s first passenger car had been the GAZ-A, produced between 1932 and 1936, and based on the Ford Model A (1927–31), built under license/technology sharing agreement with and using parts purchased from the American Ford Motor Company. It would be many years before passenger cars became available for private buyers in the Soviet Union, and passenger cars at this stage were produced for official and military use. By the time the GAZ-A was being produced in the Soviet Union, the western original Ford Model A was already becoming superseded in its western markets, and the politicians and Red army looked for a way to reduce dependence on imported components and replacement parts. The version of the Ford adapted for Soviet production was an open topped car which was unsuitable for the winter climate encountered in most of the country, and the cars were felt to be unreliable and insufficiently robust for the relatively harsh Russian conditions.
There had therefore been various attempts to modify the GAZ-A using locally designed elements, but the body structures in question had used traditional timber frames with panels attached, which were labour-intensive to produce and excessively prone to deform. In the US car body construction was changing radically during the later 1920s, using technology pioneered by Budd Company, for the production of all steel car bodies. The new approach used far more complicated steel pressings than had hitherto been possible, and the same new techniques were adopted by the more prosperous of the volume auto-makers in the west of Europe through the 1930s. GAZ’s western technology partner, Ford, took a conservative approach to these developments, but during the early 1930s they, too, would join in the switch to all-steel car bodies.
The Soviet Union was keen for the same technology to be applied at the GAZ plant in Gorky, exploiting the ten-year technology sharing agreement which had been signed with the Ford Motor Company in 1932, and which at this stage remained more or less intact.
Development and introduction
Work began in 1933/34 on a replacement for the GAZ-A, again using a (newer) Ford model as the basis. The model in question was the Ford Model B, which was becoming available with a wide range of different bodies in North America.
Specifically, the first prototype for the GAZ M-1 was based on the 1934 Ford Model B 40A four-door sedan. The prototype was powered by a four-cylinder engine (a modified version of the one used in its predecessor the GAZ-A), although it appears already to have been intended that production cars, like the Ford on which they were based, would use V8 units. Documentation was transferred by Ford in accordance with the terms of the technology sharing agreement and the first prototype was unveiled in February 1935. A major innovation for the manufacturer was the all-steel body, although at this stage the roof was still reinforced using timber side rails and was coated with synthetic “leatherette” fabric.
In 1936 the M-1 replaced the GAZ-A on the manufacturer’s production lines, with the first two cars produced in March of that year and volume production starting in May. By the end of 1936 the plant had produced 2,524 GAZ M-1s, and in 1937 an M-1 was displayed in Paris at the International Artistic and technical exhibition of modern life. The letter ”M” was included in the car’s name as the plant's name included that of Vyacheslav Molotov.[1]
Local modifications
The development of the M-1 involved many changes to the Ford on which it was based, so that many came to view the Russian car as a separate model. The rather primitive Ford suspension was completely redesigned to cope with local conditions, and matched to strong steel wheels.[1] The V8 engine was based on the same technical drawings as those used for the Ford engine, but Ford has sent only drawings. The GAZ development team had not had access to the actual Ford engine as fitted in Detroit, and so any necessary interpretations of the technical drawings were their own. The GAZ engineers also redesigned the front wings which left the Russian car with a more elegant shape which provided better protection from the elements for the front suspension.
The body
The M-1 represented a huge advance over its predecessor in many respects. Most obviously, it came with a body that used the “all-steel” approach of the more modern western designs (despite retaining timber structural elements in the roof frame) and, unlike its predecessor, a permanent fixed roof. The chassis featured an X-shaped cross member making it far stronger. The suspension was more modern and the road holding more sure-footed. Under the bonnet/hood the car came with automatic ignition, while the cabin featured front seats that could be adjusted, sun-visors, along with an electric fuel gauge, and windows which could be swiveled into an open position.
The engine and transmission
The engine was more powerful and more durable. Maximum output rose from Шаблон:Convert to Шаблон:Convert, supported by a compression ratio increased to 4.6:1 and a new carburetor design. The new engine came with a fuel pump whereas its predecessor had depended on a gravity driven fuel-feed system.[1]
The same engine was subsequently installed in the GAZ-MM light truck, an upgrade of the GAZ-AA.
The three speed manual transmission now featured synchromesh in the upper two ratios,[1] and was the gear box that would be carried forward to the replacement GAZ-M20 Pobeda in the later 1940s.
Finish
Most of the cars were painted black with a thin red stripe down each side. The seat covers were of thick cloth material coloured grey or brown, while the interior décor was characterised by painted metal, albeit combined with some wood trim.
Engine upgrade
Towards the end of the 1930s the decision was taken to replace the by now rather dated Ford designed side-valve engine. Again, the manufacturer turned to the US auto-industry, this time to Chrysler. The engine selected was the six-cylinder unit fitted to the Dodge D5, which was considered relatively advanced at the time despite being a development of a unit that had originated back in 1928. The 3485 cc unit produced Шаблон:Convert, which was far more power than that produced by the Ford designed units that had powered the earlier M-1s.[2][3] The necessary drawings were purchased in 1937-38, and after all the measurements had been converted to their metric values the necessary tooling was created and volume production of this engine, now designated as the GAZ-11 unit, began in 1940. The same unit was the basis for the GAZ-M20 Pobeda engine and also the unit used in the larger GAZ-12 ZIM limousine. It also found its way into the all-wheel drive GAZ-61 as well as various military applications such as tanks and gun carriages.
When equipped with the six-cylinder GAZ-11 engine, the car received a new radiator shroud and longer bonnet, and was designated GAZ-11-73, sometimes referred to as the GAZ M-11. Production of this variant ended in 1948 when production of its successor, the GAZ-M20 Pobeda, was completely mastered.
Taxi use
Plans to develop a dedicated taxi version of the M-1 were never fully realised, but there was nevertheless a demand for taxis in some cities which the M-1 fulfilled. The first 20 cars produced were introduced as taxis in Leningrad in 1936, and by the late summer of 1939 there were 20 of the cars being used for taxi work in Minsk. By that date there were 465 registered for taxi work in Leningrad and a further 2,740 in Moscow.
Variants
Four-cylinder version
- GAZ-M1: Main production version. Produced 1935-1941, although assembly of available stock continued into 1942.
- GAZ-M1 phaeton: Prototype phaeton-bodied (four-door convertible) version of the GAZ-M1. Produced in 1937.
- GAZ-M45: LPG-fueled version of the GAZ-M1. Produced in 1941.
- GAZ-M415: Pickup truck version. Produced 1939-1941.
- GAZ-MS: GAZ-M1 chassis for mounting armored bodies.
Six-cylinder version
- GAZ-11-73 (GAZ-11): Passenger car version. Produced 1940-1941 and 1945-1948.
- GAZ-11-40: Prototype four-door convertible version. Produced in 1940; all later rebuilt to GAZ-61-40.
- GAZ-11-415: Prototype pickup-truck version. Produced in 1940.
- GAZ-61-73: 4x4 version. Produced 1941-1945
- GAZ-61-415: Prototype pickup-truck version of GAZ-61-73. Produced in 1940.
- GAZ-41-416: Prototype light artillery tractor version.
Three-axle prototypes
- GAZ-M21: Prototype 6x4 truck version with GAZ-AA cab. Produced in 1936; rejected as too complex and replaced by the GAZ-61.
- GAZ-M22:
- GAZ-M23:
- GAZ-M24:
- GAZ-M25: Prototype 7-seater car based on GAZ-M21. Produced in 1938.
Other variants
- BA-20: Light armored car on GAZ-M1 chassis.
- GAZ-M1 V8: Variant for NKVD with imported 65 hp Ford V8s. Most of the engines were removed in 1941 and installed in T-60 tanks.
- GAZ-M2:
- GAZ-NATI-VM: Prototype halftrack with sedan and truck bodies. Produced 1937-1938.
- GAZ-GL1: racing car version based on the M1. During the later years, it was modified with GAZ 11-73 parts, including a new grille and engine. Only 1-2 prototypes were built. All of them were destroyed in the bombing of the factory during the Great Patriotic War. In 2006 a Russian company started building a replica of the GL1 using both old surviving drawings from the GAZ plant and some parts from an unrestored GAZ-M1. The body was newly-made from fiberglass. In 2010 the replica was completed.
In addition to these variants, a special model of the GAZ-M1 had been developed in 1938 for the NKVD agents. It was powered by a high-performance version of the Ford V8 engine, which was directly imported from the U.S. rather than built locally.[1] During the war, most of these engines were removed from M1s and put into T-60 tanks for the war effort.
References
Шаблон:Commons category Шаблон:Reflist
- ↑ 1,0 1,1 1,2 1,3 1,4 Odin, L.C. World in Motion 1939 - The whole of the year's automobile production. Belvedere Publishing, 2015. ASIN: B00ZLN91ZG.
- ↑ О двигателях ГАЗ-20 и ГАЗ-11
- ↑ О двигателе ГАЗ-11
.jpg){kind=link}
.jpg){kind=link}
