Английская Википедия:5052 aluminium alloy

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Infobox material 5052 is an aluminium–magnesium alloy, primarily alloyed with magnesium and chromium. 5052 is not a heat treatable aluminum alloy, but can be hardened through cold working.[1]

Chemical properties

The alloy composition of 5052 is:[1]

A similar alloy A5652 exists differing only in impurities limits.

Mechanical properties

Tensile Strengths
Hardening Ultimate MPa (PSI) Yield MPa (PSI) Tensile Strength acc. ASTM B209 [KSI] Yield Strength acc. ASTM B209 [KSI]
O 195 (28000) 89.6 (13000)
H32 228 (33000) 193 (28000) 31.0 - 38.0 >23.0
H34 262 (38000) 214 (31000) 34.0 - 41.0 >26.0
H36 276 (40000) 241 (35000) 37.0 - 44.0 >29.0
H38 290 (42000) 255 (37000) >39.0 >32.0

Uses

Typical applications include marine, aircraft, architecture, general sheet metal work, heat exchangers, fuel lines and tanks, flooring panels, streetlights, appliances, rivets and wire.

The exceptional corrosion resistance of 5052 alloy against seawater and salt spray makes it a primary candidate for the failure-sensitive large marine structures, like tanks of liquefied natural gas tankers.

Weldability

Weldability – Gas: Good

Weldability – Arc: Very Good

Weldability – Resistance: Very Good

Brazability: Acceptable

Solderability: Not recommended

References

Шаблон:Reflist

Aluminium alloy table

Шаблон:Aluminium alloys

Шаблон:Alloy-stub