Английская Википедия:Alfa Romeo 33 Stradale

Содержание

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Шаблон:About Шаблон:Use dmy dates Шаблон:Infobox automobile The Alfa Romeo 33 Stradale is a mid-engine sports car built by Italian automobile manufacturer Alfa Romeo. It was the fastest commercially available car for the standing kilometer upon its introduction. 18 examples were produced between 1967 and 1969. "Stradale" (Italian for "road-going") is a term often used by Italian car manufacturers to indicate a street-legal version of a racing car; indeed the 33 Stradale was derived from the Tipo 33 sports prototype. Built in an attempt by Alfa Romeo to make some of its racing technology available to the public, it was also the most expensive automobile for sale to the public in 1968 at US$17,000.

History

The 33 Stradale was based on the Autodelta Alfa Romeo Tipo 33 racing car. The car, designed by Franco Scaglione, and built by Carrozzeria Marazzi, made its debut at the Paris Salon de L'Auto 5 October 1967.

The first prototype (chassis no. 10533.01) was built at Autodelta's workshop in Settimo Milanese, side by side with the Tipo 33 "Periscopica" race car in 1967. The body was built by Franco Scaglione and his team from Carrozzeria Marazzi, while Autodelta worked on the technical aspects of the car. Work to manufacture another magnesium bodied prototype (chassis no. 10533.12) (intended for street racing) was started by Scaglione. However, this was not finished until 1968 by Marazzi. The two prototypes are the only ones to have the dual headlight arrangement. This was redesigned by Scaglione on the production cars due to regulations on minimum headlight distance from the ground.

The two prototypes carry the project's original serial numbers, 105.33.xx. However, the Tipo 33 racing- and production cars got 750.33.0xx (racing) and 750.33.1xx (stradale) chassis numbers. Marazzi claims to have built 18 chassis. 5 of them were used for 6 concept cars (one chassis was used twice) by Pininfarina, Bertone and Giugiaro/Italdesign and 8 were used for production cars. The rest of the chassis numbers are not confirmed due to a lack of available information as the exact number (allegedly 18) of actual Stradale-chassis (with 10 cm longer wheelbase than the race cars) doesn't quite match the range of chassis numbers.Шаблон:Cn

The production version of the 33 Stradale was introduced at the Sport Car Show at Monza, Italy in September 1967. The prototype (chassis No. 105.33.01) was sold to the Gallery Abarth in Japan. The second magnesium bodied Stradale prototype (chassis No. 105.33.12) and the five concept cars are now part of the Alfa Romeo Museum.

Specifications

Body and chassis

The 33 Stradale is one of the first production vehicles to feature forward-hinging butterfly doors. The 33 Stradale also features side windows which seamlessly curve upward into the ' roof of the vehicle. The car features an aluminium body on an aluminium tubular chassis. As a result of being built by hand, each model differs from the others in some details. For example, the position of the windscreen wiper, and some of the later cars having vents added behind both the front and rear wheels to allow hot air from the brakes to escape is a differentiating factor. The car has 13-inch Campagnolo magnesium-alloy wheels, the front wheels are eight and the rear wheels nine inches wide; the brakes used are disc brakes manufactured by Girling, the rear ones are inboard. The suspension system of the car is directly derived from the Tipo 33 race car, with upper and lower control arms in the front and double trailing arms in the rear, along with substantial antiroll bars.

Technical specifications

Type	90° DOHC V8
Displacement	Шаблон:Convert
Power	Шаблон:Convert at 8,800 rpm
Torque	Шаблон:Convert at 7,000 rpm
Top speed	Шаблон:Convert
0–100 km/h(62 mph)	less than 6 seconds (untested)

Engine and transmission

The race-bred engine bore no resemblance to the mass-produced units in Alfa Romeo's more mainstream vehicles. The engine is closely related to the V8 of the Montreal, albeit with a smaller displacement and in a higher power output. The engines, despite being derived from the Tipo 33 racer cars, differed in many details. For example, the 33 Stradale's engines had chain driven camshafts as opposed to the racers' gear driven ones, but the Stradale kept the racing engine's flat plane crankshaft, whereas the Montreal engine had a crossplane crank. Race engineer Carlo Chiti had designed an oversquare bore x stroke of Шаблон:Convert while the all-aluminum Шаблон:Convert V8 engine was dry-sump lubricated featuring SPICA fuel injection with four ignition coils and twin spark plugs per cylinder. The engine used four chain-driven camshafts to operate the 2 valves per cylinder valvetrain featuring dual overhead camshafts and had a rev-limit of 10,000 rpm with a compression ratio of 10.5:1 The engine has a maximum power output of Шаблон:Convert at 8,800 rpm and Шаблон:Convert at 7,000 rpm of torque in road trim and Шаблон:Convert in race trim. Due to the hand-built nature of the drivetrain, the power output levels can vary by each car produced, for example the first production Stradale (No. 750.33.101) has a factory datasheet that states a power output of Шаблон:Convert at 9,400 rpm with a "street" exhaust and Шаблон:Convert with open exhaust. The transmission is a 6-speed unit similar to the Tipo 33 race car, designed in house by Alfa Romeo.

Although the Stradale is a road legal car, it has some limitations which may make the everyday use slightly hard, for example missing locks and limited ground clearance.

Performance

The car takes less than six seconds to attain Шаблон:Convert from a standing start and has a claimed top speed of Шаблон:Convert. In 1968, the German Auto, Motor und Sport magazine measured a top speed of Шаблон:Convert and 24.0 seconds for the standing kilometer which made it the fastest commercially available car for this distance at the time. It achieved this using an engine less than half the displacement of those in high-performance contemporary sports cars such as the Lamborghini Miura, Ferrari Daytona, and Maserati Ghibli.

Concept cars

Five 33 Stradale chassis were used as concept cars with bodies being built by various Italian coachbuilders:

Name	Designer	Debut	Dimensions
Alfa Romeo Carabo	Marcello Gandini at Bertone	1968 Paris Motor Show
Alfa Romeo P33 RoadsterШаблон:Efn	Paolo Martin at Pininfarina	1968 Turin Auto Show
Alfa Romeo Iguana	Giorgetto Giugiaro at Italdesign	1969 Turin Auto Show
Alfa Romeo 33/2 Coupé Speciale	Leonardo Fioravanti at Pininfarina	1969 Paris Motor Show	wheelbase: Шаблон:Convert
			length x width: Шаблон:Nowrap
			height: n/a
			weight: Шаблон:Convert
Alfa Romeo P33 Cuneo	Paolo Martin at Pininfarina	1971 Brussels Motor Show
Alfa Romeo Navajo	Marcello Gandini at Bertone	1976 Geneva Motor Show	wheelbase: Шаблон:Convert
			length x width: Шаблон:Nowrap
			height: Шаблон:Convert
			weight: Шаблон:Convert

Bertone

Шаблон:AnchorAlfa Romeo Carabo

Файл:Alfa Romeo Carabo Bertone 1968 Museo Storico OCT 2015.jpg

The Alfa Romeo Carabo displayed at the Museo Storico in 2015 with a depiction of the operation of its doors

The Carabo was designed by Marcello Gandini working under Bertone, who had already built his reputation by designing the Lamborghini Miura at the time. It is a wedge-shaped coupé with scissor doors. It was car was unveiled in 1968. The car was built on the chassis No. 750.33.109.

Шаблон:AnchorAlfa Romeo Navajo

Файл:1976 Alfa Romeo Navajo - Flickr - Supermac1961.jpg

Alfa Romeo Navajo

The Alfa Romeo Navajo concept car was unveiled at the 1976 Geneva Motor Show held in March of that year. The Navajo is based on the 33 Stradale chassis No. 750.33.117. It was given a full fibreglass coupé body with a desigb reminiscent of the angular and bold styling of the 1970s. The car is equipped with 2-litre fuel injected (SPICA) V8 engine producing a power output of around Шаблон:Convert at 8,800 rpm.

Pininfarina

Between 1969 and 1971, Italian design house Pininfarina designed a total of three vehicles on two 33 Stradale chassis:

Шаблон:AnchorAlfa Romeo P33 Roadster

The Alfa Romeo P33 Roadster was presented to the public at the Turin Motor Show in November 1968. It was an open-top vehicle with a lower windscreen and a roll bar at rear painted in the colour of the body of the car. The vehicle used in the chassis No. 750.33.108. Its whereabouts are unclear. Possibly the body of the P 33 was removed after the public exhibition, and the chassis re-bodied two years later to produce the Cuneo.Шаблон:Cn

Шаблон:AnchorAlfa Romeo 33/2 Coupé Speciale

Файл:Arese Museo Storico Alfa Romeo 1969 33-2 Speciale 3.jpg

The 33/2 Coupé Speciale at the Alfa Romeo Museum

The Alfa Romeo 33/2 Coupé Speciale, also known as Alfa Romeo 33.2, is a Pininfarina designed concept car first presented to the public at the Paris Motor Show in 1969. This 2-door coupé was designed by Leonardo Fioravanti, then working at Pininfarina; the design was influenced by the Ferrari 250 P5 concept shown a year earlier at Geneva. The 33.2 featured hydraulically operated butterfly doors and pop-up headlights. It is based on the 33 Stradale chassis No. 750.33.115 and bears a striking yellow paint scheme.

Шаблон:AnchorAlfa Romeo P33 Cuneo

Файл:33-Cuneo-2.jpg

Alfa Romeo Cuneo

The Alfa Romeo Cuneo is an open-top, wedge-shaped concept car designed by Pininfarina that was presented at the Brussels Motor Show in January 1971. Popular belief is that it is probably also based on the chassis No. 750.33.108 which was used on the P 33 roadster.

Italdesign

Шаблон:AnchorAlfa Romeo Iguana

Файл:Iguana-1.jpg

Alfa Romeo Iguana

The Iguana concept car, designed by Italdesign Giugiaro, was presented at the Turin Motor Show in November 1969. It is a two-seater sports coupé built on chassis No. 750.33.116. The design showed some new elements, that Giugiaro introduced later in production vehicle designs. The body of the Iguana was painted a metal-flake grey, while the roof frame and cabin pillars were finished in brushed metal, a treatment Giugiaro later applied to the DMC DeLorean. The front end of the Iguana inspired the designs for the Maserati Bora and Merak, and the rear of the car with its high-mounted tail lights formed the basis of the design of the Alfa Romeo Alfasud Sprint. Allegedly, a small series production of the Iguana was planned, but it never materialized.

In Popular Culture

A 33 Stradale can be seen in the 1969 Italian movie Un bellissimo novembre.

See also

• Alfa Romeo 33 Stradale (2023)
• Alfa Romeo Montreal
• Ferrari Dino
• Lancia Stratos

External links

• German article of Stradale with chassis numbers
• Brief story and original pictures about the 33 Stradale and five of the derived concepts