Английская Википедия:American Bantam

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:Use dmy dates Шаблон:Infobox company

The American Bantam Car Company was an American automobile manufacturing company incorporated in the state of Pennsylvania. American Bantam is credited with inventing the original [[Willys MB|World War II Шаблон:1/4Шаблон:Nbhton jeep]] in 1940.[nb 1][1][2][3][4] The company's founders, Roy Evans and William A. Ward Jr., combined resources to purchase the assets of the bankrupt American Austin Car Company in August of 1935 during liquidation.[5]

In 1935 the new company produced vehicles based on the American Austin tooling, operating as Evans Operations Inc.[6] The new company was incorporated as American Bantam Car Company in June 1936.[7] The new company launched a public fundraising campaign and redesigned their entire vehicle line to launch a completely refreshed selection of American Bantam roadsters and delivery vans in 1937. The company continued to make vehicles into 1943, until all of its production – like all the U.S. automotive industry – served the World War II efforts, with vehicles and weapons manufacturing, including (amphibious) cargo trailers, aircraft controls and other parts, and engines and tail gearing for torpedoes.[8]

History

On June 2, 1936, Roy Evans and his co-founders incorporated American Bantam Car Company in Pennsylvania and transferred the assets purchased from the American Austin Car Company, along with $500 in cash to the new company.[9] In early 1937, Evans phoned Count Alexis de Sakhnoffsky, the original Austin body designer, and asked him to design a new line of bodies improvised around the existing tooling. No funds were available for a costly styling program, much less to engineer new body dies, so the new design had to use as much of the original tooling as possible.[10]

In early 1937 Alexis de Sakhnoffsky visited the American Bantam factory in Butler, Pennsylvania, and designed a completely new front grille, new front fenders and new rear fenders. The Austin engine was also redesigned with a new aluminum induction system and cylinder head, retaining the 45.6 cubic inch (747 cc) displacement, but while adopting a fully pressurized oil system, increasing the compression ratio by 40% to a 7:1 ratio and implementing plain babbitt crankshaft bearings to produce 20 horsepower at 4,000 rpm, a 50% improvement over the Austin engine. [11][12] American Bantam's 1938 model was the inspiration for Donald Duck's car which was first seen in Don Donald (1937). Despite a wide range of Bantam body styles, ranging from light trucks to woodie station wagons, only about 6,000 Bantams of all types were produced. American Bantam continued to build cars until August 18, 1943.[13] Шаблон:Break

Invention of the Original Jeep

Файл:1941-american-bantam-jeep.jpg
American Bantam BRC-40 mass production WWII jeep
Файл:Bantam jeep flying 37mm sm (cropped).jpg
The 1941 Bantam BRC was strong enough for total lift-off, loaded with a full 3-man crew, and towing a 37mm anti-tank gun — this U.S. Army Signal Corps photo may have inspired the "Flying Jeep" poster, the 'Leaping Lena' nickname, etc.

American Bantam is credited with the invention of the original jeep[14][15] and the first serial production military jeeps ordered by the U.S. Army in 1940.[16]

The idea of a small, durable automobile to replace the horse was championed by American Bantam salesman Navy Commander Charles 'Harry' Payne (retired),[17] working closely with Robert Brown,[18] a civilian consultant working for the U.S. Army Quartermaster Corps (QMC), American Bantam chief engineer Harold Crist and American Bantam president Frank Fenn, who together during the spring of 1940 laid out the specifications for the first Bantam Reconnaissance Car.[19] Harold Crist did the lion's share of specifying, conceiving, designing and building the car with Karl Probst drafting and formalizing pre-existing layout and specifications set out by Crist.[20][21]

American Bantam delivered the first jeep to the QMC on September 23, 1940, at Camp Holabird, a U.S. Army base to the east of Baltimore, Maryland. Engineers from Ford and Willys-Overland on-hand at Camp Holabird during testing to learn more about the new vehicle. The original jeep designs were handed over to Willys-Overland and Ford and became the basis for the design of the World War II jeep. After the delivery of the first jeep, American Bantam kicked off serial production of the Mark II (also called the BRC-60) jeeps with improvements suggested by the QMC. American Bantam was the sole manufacturer of jeeps put into service by the U.S. Army during 1940.[16]

All together American Bantam built 2,675 jeeps from 1940 through 1943,[22] with the bulk of those vehicles being delivered during 1941. More than half of the initial production went to the British Army, and some to the Soviet Union. Some of the motors and chassis were imported from Toledo, Ohio; the original bodies were made at the American Bantam factory in Butler, Pennsylvania.

The Bantam company produced the most fuel-efficient engine and first prototype under the original U.S. Army tender specifications and was awarded the first contract. However, because elements favorable to Ford within the Quartermaster Corps claimed[23] that Bantam lacked production capacity to produce the vehicle on the scale needed by the Army, the awarding of ongoing contracts was reopened. Eventually the Army gave the BRC (Bantam Reconnaissance Car) 40 designs to Willys-Overland and awarded the bulk of orders to Willys and Ford,[24] while Bantam went on to produce jeep trailers (T-3).

After World War II American Bantam continued to make trailers for the consumer market. In 1943 American Bantam launched an Advertising campaign boasting that "Ivan got his first Jeep from Bantam"[25] in response to an application by Willys-Overland to the United States Patent and Trademark Office to trademark "JEEP" filed on February 13, 1943.[26]

Trailer production continued until the company was taken over by American Rolling Mills in 1956.[27]

Gallery

Footnotes

Шаблон:Reflist

References

Шаблон:Reflist

External links

Шаблон:Commons category

Шаблон:Automotive industry in the United States


Ошибка цитирования Для существующих тегов <ref> группы «nb» не найдено соответствующего тега <references group="nb"/>

  1. House Resolution 382; Regular Session 2015-2016 Retrieved 11 July 2022
  2. HOUSE RESOLUTION No. 382 Session of 2015 Retrieved 11 July 2022
  3. Invention of the Jeep Historical Marker Retrieved 16 July 2022
  4. Questions and Answers – Who Invented the Jeep? Retrieved 13 July 2022
  5. American Bantam Car Co. v. Comm'r of Internal Revenue Retrieved 11 July 2022
  6. Austin Motor Cars Now Being Produced Retrieved 11 July 2022
  7. Search Business Entity: American Bantam Car Retrieved 13 July 2022
  8. It gets its Fighting Heart from a Fighting Bantam Retrieved 13 July 2022
  9. American Bantam Car Co. v. Comm'r of Internal Revenue Retrieved 11 July 2022
  10. Шаблон:Cite book
  11. Шаблон:Cite book
  12. 1933 American Austin Bantam Specifications Retrieved 11 July 2022
  13. July 27, 1988 – A Personal Interview of Chet Hempling as told to Bob Lindsey Retrieved 11 July 2022
  14. HOUSE RESOLUTION No. 382 Session of 2015 Retrieved 11 July 2022
  15. Questions and Answers – Who Invented the Jeep? Retrieved 13 July 2022
  16. 16,0 16,1 Шаблон:Cite book
  17. 194208 – The Story Behind the Army Jeep – Illustrated Gazette – Vol 1 No 4 – pg.1,2,6,8 Retrieved 11 July 2022
  18. The Original Jeep Retrieved 11 July 2022
  19. Bantam: The Father of the Jeep Retrieved 11 July 2022
  20. Шаблон:Cite book
  21. Bantam: The Father of the Jeep Retrieved 11 July 2022
  22. July 27, 1988 – A Personal Interview of Chet Hempling as told to Bob Lindsey Retrieved 11 July 2022
  23. Шаблон:Cite book
  24. Шаблон:Cite journal
  25. "Ivan got his first Jeep" – Newspapers.com search Retrieved 11 July 2022
  26. Trouble with the Trademark Retrieved 13 July 2022
  27. Шаблон:Cite book