Английская Википедия:Detroit Diesel Series 71

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Refimprove Шаблон:Infobox engine The Detroit Diesel Series 71 is a two-stroke diesel engine series, available in both inline and V configurations, manufactured by Detroit Diesel. The number 71 refers to the nominal displacement per cylinder in cubic inches, a rounding off of Шаблон:Convert.

Inline models included one, two, three, four and six cylinders, and the V-types six, eight, 12, 16, and 24 cylinders.

The two largest V units used multiple cylinder heads per bank to keep the head size and weight to manageable proportions, the V-16 using four heads from the four-cylinder inline model, and the V-24 using four heads from the inline six-cylinder model. This feature also assisted in reducing the overall cost of these large engines by maintaining parts commonality with the smaller models.

History

The inline six-cylinder 71 series engine was introduced as the initial flagship product of the Detroit Diesel Engine Division of General Motors in 1938.

This engine was in high demand during WWII, necessitating a dramatic increase in output: about 57,000 6-71s were used on American landing craft, including 19,000 on LCVPs, about 8,000 on LCM Mk 3, and about 9,000 in quads on LCIs; and 39,000 were used in armor, including 4,000 on Valentine tanks, 22,000 in double packs on M4A2s, and 11,000 on M10 tank destroyers.[1]

The V-type first appeared in 1957.

Sales of the Series 71 ceased in the summer of 1995, with the four-stroke Detroit Diesel engine introduced as a replacement.

Design

Файл:Detroit Diesel 8V 71T (used in a M109) (41450603320).jpg
Detroit Diesel 8V-71T as used in the US M109 self-propelled howitzer

Bore and stroke are the same across all units, at Шаблон:Convert. Inline models were famously "symmetrical," meaning that the blower, exhaust, water manifold, starter, and other components could be mounted on either side of the basic block to fit a particular application. A number of models could also run with the crankshaft turning either clockwise or counter-clockwise, called "Right Hand" or "Left Hand" rotation engines (as viewed from the front of the engine). The less-common Left Hand engines were typically used in buses, because the rotation matched rear-engined transverse installations. Boats equipped with two engines would typically use one Left Hand and one Right Hand, so that the torque from the propellers would cancel each other out, without the need for a complex reversing gear on one side.

As a two-stroke diesel engine that does not use crankcase aspiration cannot naturally draw in combustion air, the blower is inherently necessary to charge the cylinders with air for combustion. The blower also assists in scavenging spent combustion gasses at the end of the power stroke. All Series 71 engines use uniflow scavenging, in which a gear-driven Roots blower mounted to the exterior of the engine provides intake air through cored passages in the engine block and ports in the cylinder walls at slightly greater than atmospheric pressure. The engine exhausts through pushrod-operated poppet valves in the cylinder head(s), with either two or four valves per cylinder. Unit fuel injection is employed, one injector per cylinder, with no high fuel pressure outside of the injector body. The injectors are cycled from the same camshaft responsible for opening the exhaust valves.

Nomenclature

The first number refers to the number of cylinders in the engine, followed by a hyphen or "V", indicating inline or vee, respectively, then 71 for the Series designation, referring the nominal displacement per cylinder in cubic inches (rounding up Шаблон:Convert).

Like most Detroit Diesel two-cycle engines, the 71 Series are equipped with a blower yet still referred to as "naturally aspirated" (SAE designation). These do not have a model suffix identifier: 6-71 is an inline 6. When the model number includes a suffix, it denotes additional features. Engines equipped with needle unitШаблон:Clarifyme fuel injectors and commonly four exhaust valves per cylinder are indicated by the suffix "N", so for the V8, 8V-71N. Later versions were available with turbochargers, which discharged directly into the Roots blower intake; these have a "T" suffix, and with aftercooling, a "TA,, so 8V-71T or 8V-71TA. "TT" indicates Tailored Torque and "TTA" Tailored Torque Aftercooled. These models are designated for economy (Fuel Squeezer) and constant horsepower ratings.

Applications

Файл:42BUSTRIP1 11 16 08.jpg
Motor Coach Industries MC-9 bus powered by a rear-mounted 8V-71 Detroit Diesel engine.

The most popular incarnations of the series 71 engine as used for highway vehicle applications included the inline 6-71, the V-block 6V-71 (both widely used in transit buses) and the 8V-71 V-8. In addition to motorcoach propulsion, both inline and V types have found extensive usage in school buses, trucks, fire apparatus, motor homes, construction[2] and industrial machinery, a few farm tractors, commercial fishing vessels, and military vehicles and equipment.

The 71 series is very popular in marine applications, not only as a propulsion engine in small craft (Gray Marine 6-71) but as auxiliary power to drive generators, winches and other heavy shipboard machinery. The Detroit inline 6-71 engine, in all of its variations, was also available as a "pancake engine" (here variably called either 6L-71 or 6N-71) for horizontal (underfloor) mount applications, such as on larger Crown and Gillig school buses and articulated puller transit buses (such as the Crown-Ikarus 286). Many 4-71 engines were used in various types of construction equipment, such as Galion highway graders.

The six-cylinder version was also used in the Victorian Railways DERM railmotor.

Variants

Detroit Diesel (2 cycle) common model and suffix codes
Model codes Description
L Low profile
V V-block
N Needle Unit Injectors, four exhaust valves (per cylinder)
T Turbocharged
TA Turbocharged Aftercooled (JWAC Jacket Water Aftercooled)
TAC Turbocharged Aftercooled California Certification (JWAC Jacket Water Aftercooled)
TT Tailored Torque (Fuel Squeezer)
TTA Tailored Torque Aftercooled (Fuel Squeezer Plus) (JWAC Jacket Water Aftercooled)
TI Turbocharged Intercooled
TIB Turbocharged Intercooled Bypass Blower
Model Displacement Engine configuration Power
1-71 Шаблон:Convert Single-cylinder Шаблон:Convert
2-71 Шаблон:Convert I-2 Шаблон:Convert
3-71 Шаблон:Convert I-3 Шаблон:Convert
4-71 Шаблон:Convert I-4 Шаблон:Convert
6-71 Шаблон:Convert I-6 Шаблон:Convert
6V-71 Шаблон:Convert V-6 Шаблон:Convert
8V-71 Шаблон:Convert V-8 Шаблон:Convert[3]
12V-71 Шаблон:Convert V-12 Шаблон:Convert
16V-71 Шаблон:Convert V-16 Шаблон:Convert
Series 71 specifications for selected models
Family Model Torque Power Length × Width × Height Weight
3-71 3-71[4] Шаблон:Convert
@ 1400 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
4-71 4-71[4][5] Шаблон:Convert
@ 1600 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
4-71T[6] Шаблон:Convert
@ 1400 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
6-71 6-71[4][7] Шаблон:Convert
@ 1600 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
6-71T[6][8] Шаблон:Convert
@ 1400 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
6-71TT[9] Шаблон:Convert
@ 1200 rpm
Шаблон:Convert
@ 1950 rpm
Шаблон:Convert Шаблон:Convert
6V-71 6V-71[10][11] Шаблон:Convert
@ 1600 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
6V-71T[11] Шаблон:Convert
@ 1600 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
8V-71 8V-71[10][12] Шаблон:Convert
@ 1600 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
8V-71T[12] Шаблон:Convert
@ 1600 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
8V-71TA[13] Шаблон:Convert
@ 1200 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
8V-71TTA[13] Шаблон:Convert
@ 1200 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
12V-71 12V-71[10][14] Шаблон:Convert
@ 1600 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
12V-71T[14] Шаблон:Convert
@ 1600 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert
16V-71

(two joined 8V71 engine blocks)

16V-71TI[15] Шаблон:Convert
@ 1600 rpm
Шаблон:Convert
@ 2100 rpm
Шаблон:Convert Шаблон:Convert


Model numbers

Series 71 sample model numbersШаблон:Cn
Engine Model
numbers
Injectors Rated gross power
kW BHP
25993 1033–5000 81
1033–7000 81
26024 1043–5000 N60 104 140
26024 1043–5000 N65 113 152
4-71 + Torque Converter 1043–5001 N65 113 152
26024 1043–7000 N60 104 140
26024 1043–7000 N65 113 152
4-71T 1043–8300 N75 142 190
26085 1063–5000 N65 170 228
26085 1063–5000 N65 228
6-71 + Torque Converter 1063–5001 N65 170 228
26085 1063–5100 N65 218
1063–7000 228
26085 1063–7000 N65 170 228
26085 1063–7100 N65 218
6-71T 1063–8300 N75 213 285
6-71T 1063–8340 7C75 205 275
6-71TT 1063–8740 7E+75 172 230
6V71 7063–7000 N65 170 228
6V71 + Torque Converter 7063–7001 N65 170 228
6V71T 7063–7300 N75 195 262
8V71 7083–7000 N65 227 304
8V71 + Torque Converter 7083–7001 N65 227 304
8V71 7087–7040 7E+65 227 304
8V71T 7083–7300 N75 261 350
8V71T 7087–7340 N75 350
7087–7344 N65 308
7087–7344 N70 335
8V71TA 7087–7640 7C75 276 370
8V71TT 7087–7340 N75 228 305
8V71TTA 7087–7940 7C75 228 305
12V71 +Torque Converter 7123–7001 340

Further developments

WWII General Motors 6004/6046 engine Шаблон:Anchor

The inline 6-71 was adapted to British requirements as the power plant for Canadian (and later British) built Valentine tanks where it was known as the GMC 6004, orders being placed in late September 1940.[16]

The 6046 Diesel was a twin engine setup used by US and British tanks and tank destroyers.

Detroit Diesel 6051 quad-71

The Detroit Diesel 6051 quad-71 was a Detroit Diesel Series 6-71 side by side tandem engine setup of two banks of four engines each driving two propeller shafts in Landing Craft Infantry LCI(L). The eight engines produced a total of Шаблон:Convert.[17]

Soviet/Russian copies

In the Soviet Union / Russia, various versions of this engine-type were produced at the YaAZ automobile factory in Yaroslavl.[18] Throughout World War II, the 4-71 engine both in locally assembled form (built by Lend-Lease provided American industrial equipment) and from US-supplied kits had been used for Ya-12 light artillery tractors.[19] After 1945, the 4-71 engine entered production in a slightly modified configuration (deuniversalization, conversion to metric units, a more powerful preheater[20]) to suit the conditions of the Soviet Union–branded "YaAZ-204".[18] After 1947, the factory used a copy of the 6-71 engine branded "YaAZ-206" in the YaAZ-210 and YaAZ-214 heavy trucks built from 1951 to 1959. The vehicle production was transferred to KrAZ in Kremenchuk, Ukraine, in 1959, where trucks with newer versions of the YaAZ-206 stood in production until the appearance of the four-stroke V8-engined KrAZ-255 in 1967.[21][22][23][24][25]

See also

References

Шаблон:Reflist

Шаблон:Commons category

Sources

  • Shelton, Chris. "Then, Now, and Forever" in Hot Rod, March 2017, pp.16-29.