The Huntington H-11 Governor was a two-seat cabin monoplane with a high, cantilever wing built in the United States and first flown around 1930. Three were completed.
The Governor was a side-by-side, cantileverhigh wingmonoplane, designed for business or pleasure. It was unusually aerodynamically clean as its cantilever wing, mounted on top of the fuselage, had no external struts. The wing had a straight leading edge and tapered out to blunted tips.[1]
The fuselage structure was rectangular in section but its decking was polyangular. The Governor prototype was powered by a Шаблон:CvtWarner Scarab seven cylinder radial engine, though the Шаблон:CvtChevrolet D-4 (later called the Martin 4-333) air-cooled, inverted four cylinder inline[2] or Шаблон:CvtKinner B-5 five cylinder radial were options.[3] Pilot and passenger sat side by side behind it in an underwing, windowed cabin accessed by large doors.[1] The tail was conventional with a tailplane, braced from below, on top of the fuselage and a cropped triangular fin and rounded balanced rudder.[3]
The main undercarriage was a split-axle design with the axles from the fuselage central underside. Their outer ends were mounted on V-struts from the lower fuselage longerons. There was a small and semi-enclosed tailwheel.[1]
The date of the Governor's first flight is not known. The prototype was largely complete by the time of the August 1930 Aero Digest article, though its photo shows instrument panel gaps.[1] Three were built, the last a Kinner-powered H-11K,[3] but their later activities are not known.