The Ikarus 280 is a model of the Ikarus 200 series. It is made of two rigid sections linked by a pivoting joint. The body is a semi-self-supporting body with a frame, the Raba-MAN D2156 inline-6 diesel engine is mounted in the front section.Шаблон:Efn It powers the middle axle, meaning that the bus has puller configuration. All three axles are air-sprung beam axles with additional telescopic shock absorbers. Both rear and middle axles were made by Rába, while the front axle was made by LiAZ.Шаблон:Efn Either an automatic or a manual gearbox was installed that allowed a top speed of Шаблон:Convert. The manual gearboxes came in either five- or six-speed configuration, and were mated with a dry single-disc clutch. The Ikarus 280 has a pneumatic braking system, a spring loaded parking brake, and an exhaust brake. The steering is hydraulically assisted.[2] The buses, in actual applications, have a minimum of 26 seats, and space for up to 134 additional standing passengers.Шаблон:Efn
Production and operation
Production started in 1973 and ended in 2002. The 280 was based on the Ikarus 200 platform and had many variants produced. Currently (2020), the number of Ikarus 280 buses in active service is declining, due to supply of new low-floor buses. The articulated buses 281(RHD), 282 and 283 (Шаблон:Convert-versions), 284 (pusher configuration), C80, C83, the articulated trolleybuses Ikarus 280T, 283T, 284T and the double articulated Ikarus 293 were based on the Ikarus 280.
Ikarus C80 is a limited-run reproduction of Ikarus 280 in 2000s. It is slightly different from original Ikarus 280 in few regards. All are used by Hungarian company Volanbusz.