Английская Википедия:2B1Q

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description

Two-binary, one-quaternary (2B1Q) is a line code used in the U interface of the Integrated Services Digital Network (ISDN) Basic Rate Interface (BRI) and the high-bit-rate digital subscriber line (HDSL).[1] 2B1Q is a four-level pulse-amplitude modulation (PAM-4) scheme without redundancy, mapping two bits (2B) into one quaternary symbol (1Q). Symbol rate is half of data rate.

A competing encoding technique in the ISDN basic rate U interface, mainly used in Europe, is 4B3T.

Encoding

To minimize error propagation, bit pairs (dibits) are assigned to voltage levels according to a Gray code, as follows:

Dibit Signal level
10 +450 mV
11 +150 mV
01 −150 mV
00 −450 mV

If the voltage is misread as an adjacent level, this causes only a 1-bit error in the decoded data. 2B1Q code is not DC-balanced.

References

Шаблон:Reflist

Шаблон:Bit-encoding


Шаблон:Telecomm-stub