Английская Википедия:Acceleration

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:About Шаблон:Redirect Шаблон:Use British English Шаблон:Infobox physical quantity{dt} = \frac{d^2\mathbf{x}}{dt^2}</math> | dimension = wikidata }} Шаблон:Classical mechanics

Файл:DonPrudhommeFire1991KennyBernstein.jpg
Drag racing is a sport in which specially-built vehicles compete to be the fastest to accelerate from a standing start.

In mechanics, acceleration is the rate of change of the velocity of an object with respect to time. Acceleration is one of several components of kinematics, the study of motion. Accelerations are vector quantities (in that they have magnitude and direction).[1][2] The orientation of an object's acceleration is given by the orientation of the net force acting on that object. The magnitude of an object's acceleration, as described by Newton's Second Law,[3] is the combined effect of two causes:

The SI unit for acceleration is metre per second squared (Шаблон:Nowrap, <math>\mathrm{\tfrac{m}{s^2}}</math>).

For example, when a vehicle starts from a standstill (zero velocity, in an inertial frame of reference) and travels in a straight line at increasing speeds, it is accelerating in the direction of travel. If the vehicle turns, an acceleration occurs toward the new direction and changes its motion vector. The acceleration of the vehicle in its current direction of motion is called a linear (or tangential during circular motions) acceleration, the reaction to which the passengers on board experience as a force pushing them back into their seats. When changing direction, the effecting acceleration is called radial (or centripetal during circular motions) acceleration, the reaction to which the passengers experience as a centrifugal force. If the speed of the vehicle decreases, this is an acceleration in the opposite direction of the velocity vector (mathematically a negative, if the movement is unidimensional and the velocity is positive), sometimes called deceleration[4][5] or retardation, and passengers experience the reaction to deceleration as an inertial force pushing them forward. Such negative accelerations are often achieved by retrorocket burning in spacecraft.[6] Both acceleration and deceleration are treated the same, as they are both changes in velocity. Each of these accelerations (tangential, radial, deceleration) is felt by passengers until their relative (differential) velocity are neutralized in reference to the acceleration due to change in speed.

Definition and properties

Файл:Kinematics.svg
Kinematic quantities of a classical particle: mass Шаблон:Mvar, position Шаблон:Math, velocity Шаблон:Math, acceleration Шаблон:Math.

Average acceleration

Файл:Acceleration as derivative of velocity along trajectory.svg
Acceleration is the rate of change of velocity. At any point on a trajectory, the magnitude of the acceleration is given by the rate of change of velocity in both magnitude and direction at that point. The true acceleration at time Шаблон:Mvar is found in the limit as time interval Шаблон:Math of Шаблон:Math

An object's average acceleration over a period of time is its change in velocity, <math>\Delta \mathbf{v}</math>, divided by the duration of the period, <math>\Delta t</math>. Mathematically, <math display="block">\bar{\mathbf{a}} = \frac{\Delta \mathbf{v}}{\Delta t}.</math>

Instantaneous acceleration

Файл:1-D kinematics.svg
From bottom to top: Шаблон:Bulleted list

Instantaneous acceleration, meanwhile, is the limit of the average acceleration over an infinitesimal interval of time. In the terms of calculus, instantaneous acceleration is the derivative of the velocity vector with respect to time: <math display="block">\mathbf{a} = \lim_{{\Delta t} \to 0} \frac{\Delta \mathbf{v}}{\Delta t} = \frac{d\mathbf{v}}{dt}.</math> As acceleration is defined as the derivative of velocity, Шаблон:Math, with respect to time Шаблон:Mvar and velocity is defined as the derivative of position, Шаблон:Math, with respect to time, acceleration can be thought of as the second derivative of Шаблон:Math with respect to Шаблон:Mvar: <math display="block">\mathbf{a} = \frac{d\mathbf{v}}{dt} = \frac{d^2\mathbf{x}}{dt^2}.</math>

(Here and elsewhere, if motion is in a straight line, vector quantities can be substituted by scalars in the equations.)

By the fundamental theorem of calculus, it can be seen that the integral of the acceleration function Шаблон:Math is the velocity function Шаблон:Math; that is, the area under the curve of an acceleration vs. time (Шаблон:Mvar vs. Шаблон:Mvar) graph corresponds to the change of velocity. <math display="block" qid=Q11465>\mathbf{\Delta v} = \int \mathbf{a} \, dt.</math>

Likewise, the integral of the jerk function Шаблон:Math, the derivative of the acceleration function, can be used to find the change of acceleration at a certain time: <math display="block">\mathbf{\Delta a} = \int \mathbf{j} \, dt.</math>

Units

Acceleration has the dimensions of velocity (L/T) divided by time, i.e. L T−2. The SI unit of acceleration is the metre per second squared (m s−2); or "metre per second per second", as the velocity in metres per second changes by the acceleration value, every second.

Other forms

An object moving in a circular motion—such as a satellite orbiting the Earth—is accelerating due to the change of direction of motion, although its speed may be constant. In this case it is said to be undergoing centripetal (directed towards the center) acceleration.

Proper acceleration, the acceleration of a body relative to a free-fall condition, is measured by an instrument called an accelerometer.

In classical mechanics, for a body with constant mass, the (vector) acceleration of the body's center of mass is proportional to the net force vector (i.e. sum of all forces) acting on it (Newton's second law): <math display="block" qid=Q2397319>\mathbf{F} = m\mathbf{a} \quad \implies \quad \mathbf{a} = \frac{\mathbf{F}}{m},</math> where Шаблон:Math is the net force acting on the body, Шаблон:Mvar is the mass of the body, and Шаблон:Math is the center-of-mass acceleration. As speeds approach the speed of light, relativistic effects become increasingly large.

Tangential and centripetal acceleration

Шаблон:See also

Файл:Oscillating pendulum.gif
An oscillating pendulum, with velocity and acceleration marked. It experiences both tangential and centripetal acceleration.
Файл:Acceleration components.svg
Components of acceleration for a curved motion. The tangential component Шаблон:Math is due to the change in speed of traversal, and points along the curve in the direction of the velocity vector (or in the opposite direction). The normal component (also called centripetal component for circular motion) Шаблон:Math is due to the change in direction of the velocity vector and is normal to the trajectory, pointing toward the center of curvature of the path.

The velocity of a particle moving on a curved path as a function of time can be written as: <math display="block">\mathbf{v}(t) = v(t) \frac{\mathbf{v}(t)}{v(t)} = v(t) \mathbf{u}_\mathrm{t}(t) , </math> with Шаблон:Math equal to the speed of travel along the path, and <math display="block">\mathbf{u}_\mathrm{t} = \frac{\mathbf{v}(t)}{v(t)} \, , </math> a unit vector tangent to the path pointing in the direction of motion at the chosen moment in time. Taking into account both the changing speed Шаблон:Math and the changing direction of Шаблон:Math, the acceleration of a particle moving on a curved path can be written using the chain rule of differentiation[7] for the product of two functions of time as:

<math display="block">\begin{alignat}{3} \mathbf{a} & = \frac{d \mathbf{v}}{dt} \\

          & =  \frac{dv}{dt} \mathbf{u}_\mathrm{t} +v(t)\frac{d \mathbf{u}_\mathrm{t}}{dt} \\
          & = \frac{dv }{dt} \mathbf{u}_\mathrm{t} + \frac{v^2}{r}\mathbf{u}_\mathrm{n}\ ,

\end{alignat}</math>

where Шаблон:Math is the unit (inward) normal vector to the particle's trajectory (also called the principal normal), and Шаблон:Math is its instantaneous radius of curvature based upon the osculating circle at time Шаблон:Mvar. The components

<math>\mathbf{a}_\mathrm{t} = \frac{dv }{dt} \mathbf{u}_\mathrm{t} \quad\text{and}\quad \mathbf{a}_\mathrm{c} = \frac{v^2}{r}\mathbf{u}_\mathrm{n}</math>

are called the tangential acceleration and the normal or radial acceleration (or centripetal acceleration in circular motion, see also circular motion and centripetal force), respectively.

Geometrical analysis of three-dimensional space curves, which explains tangent, (principal) normal and binormal, is described by the Frenet–Serret formulas.[8][9]

Special cases

Uniform acceleration

Шаблон:See also

Файл:Strecke und konstante Beschleunigung.png
Calculation of the speed difference for a uniform acceleration

Uniform or constant acceleration is a type of motion in which the velocity of an object changes by an equal amount in every equal time period.

A frequently cited example of uniform acceleration is that of an object in free fall in a uniform gravitational field. The acceleration of a falling body in the absence of resistances to motion is dependent only on the gravitational field strength [[standard gravity|Шаблон:Math]] (also called acceleration due to gravity). By Newton's Second Law the force <math> \mathbf{F_g}</math> acting on a body is given by: <math display="block"> \mathbf{F_g} = m \mathbf{g}.</math>

Because of the simple analytic properties of the case of constant acceleration, there are simple formulas relating the displacement, initial and time-dependent velocities, and acceleration to the time elapsed:[10] <math display="block">\begin{align} \mathbf{s}(t) &= \mathbf{s}_0 + \mathbf{v}_0 t + \tfrac{1}{2} \mathbf{a}t^2 = \mathbf{s}_0 + \tfrac{1}{2} \left(\mathbf{v}_0 + \mathbf{v}(t)\right) t \\ \mathbf{v}(t) &= \mathbf{v}_0 + \mathbf{a} t \\ {v^2}(t) &= {v_0}^2 + 2\mathbf{a \cdot}[\mathbf{s}(t)-\mathbf{s}_0], \end{align}</math>

where

  • <math>t</math> is the elapsed time,
  • <math>\mathbf{s}_0</math> is the initial displacement from the origin,
  • <math>\mathbf{s}(t)</math> is the displacement from the origin at time <math>t</math>,
  • <math>\mathbf{v}_0</math> is the initial velocity,
  • <math>\mathbf{v}(t)</math> is the velocity at time <math>t</math>, and
  • <math>\mathbf{a}</math> is the uniform rate of acceleration.

In particular, the motion can be resolved into two orthogonal parts, one of constant velocity and the other according to the above equations. As Galileo showed, the net result is parabolic motion, which describes, e.g., the trajectory of a projectile in vacuum near the surface of Earth.[11]

Circular motion

Шаблон:Multiple image

In uniform circular motion, that is moving with constant speed along a circular path, a particle experiences an acceleration resulting from the change of the direction of the velocity vector, while its magnitude remains constant. The derivative of the location of a point on a curve with respect to time, i.e. its velocity, turns out to be always exactly tangential to the curve, respectively orthogonal to the radius in this point. Since in uniform motion the velocity in the tangential direction does not change, the acceleration must be in radial direction, pointing to the center of the circle. This acceleration constantly changes the direction of the velocity to be tangent in the neighboring point, thereby rotating the velocity vector along the circle.

  • For a given speed <math>v</math>, the magnitude of this geometrically caused acceleration (centripetal acceleration) is inversely proportional to the radius <math>r</math> of the circle, and increases as the square of this speed: <math qid=Q2248131 display="block"> a_c = \frac {v^2} {r}\,.</math>
  • For a given angular velocity <math>\omega</math>, the centripetal acceleration is directly proportional to radius <math>r</math>. This is due to the dependence of velocity <math>v</math> on the radius <math>r</math>. <math display="block"> v = \omega r.</math>

Expressing centripetal acceleration vector in polar components, where <math>\mathbf{r} </math> is a vector from the centre of the circle to the particle with magnitude equal to this distance, and considering the orientation of the acceleration towards the center, yields <math display="block"> \mathbf {a_c}= -\frac{v^2}{|\mathbf {r}|}\cdot \frac{\mathbf {r}}{|\mathbf {r}|}\,. </math>

As usual in rotations, the speed <math>v</math> of a particle may be expressed as an angular speed with respect to a point at the distance <math>r</math> as <math display="block" qid=Q161635>\omega = \frac {v}{r}.</math>

Thus <math> \mathbf {a_c}= -\omega^2 \mathbf {r}\,. </math>

This acceleration and the mass of the particle determine the necessary centripetal force, directed toward the centre of the circle, as the net force acting on this particle to keep it in this uniform circular motion. The so-called 'centrifugal force', appearing to act outward on the body, is a so-called pseudo force experienced in the frame of reference of the body in circular motion, due to the body's linear momentum, a vector tangent to the circle of motion.

In a nonuniform circular motion, i.e., the speed along the curved path is changing, the acceleration has a non-zero component tangential to the curve, and is not confined to the principal normal, which directs to the center of the osculating circle, that determines the radius <math>r</math> for the centripetal acceleration. The tangential component is given by the angular acceleration <math>\alpha</math>, i.e., the rate of change <math>\alpha = \dot\omega</math> of the angular speed <math>\omega</math> times the radius <math>r</math>. That is, <math display="block"> a_t = r \alpha.</math>

The sign of the tangential component of the acceleration is determined by the sign of the angular acceleration (<math>\alpha</math>), and the tangent is always directed at right angles to the radius vector.

Relation to relativity

Special relativity

Шаблон:Main The special theory of relativity describes the behavior of objects traveling relative to other objects at speeds approaching that of light in vacuum. Newtonian mechanics is exactly revealed to be an approximation to reality, valid to great accuracy at lower speeds. As the relevant speeds increase toward the speed of light, acceleration no longer follows classical equations.

As speeds approach that of light, the acceleration produced by a given force decreases, becoming infinitesimally small as light speed is approached; an object with mass can approach this speed asymptotically, but never reach it.

General relativity

Шаблон:Main Unless the state of motion of an object is known, it is impossible to distinguish whether an observed force is due to gravity or to acceleration—gravity and inertial acceleration have identical effects. Albert Einstein called this the equivalence principle, and said that only observers who feel no force at all—including the force of gravity—are justified in concluding that they are not accelerating.[12]

Conversions

Шаблон:Acceleration conversions

See also

Шаблон:Div col

Шаблон:Div col end

References

Шаблон:Reflist

External links

Шаблон:Commons category

  • Acceleration Calculator Simple acceleration unit converter
  • Acceleration Calculator Acceleration Conversion calculator converts units form meter per second square, kilometer per second square, millimeter per second square & more with metric conversion.

Шаблон:Kinematics Шаблон:Classical mechanics derived SI units Шаблон:Authority control