Английская Википедия:AgniKul Cosmos

Содержание

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

AgniKul Cosmos Private LimitedШаблон:Efn is an Indian aerospace manufacturer based in National Center for Combustion R&D (NCRD) of IIT Madras, Chennai. The start up aims to develop and launch its own small-lift launch vehicle such as the Agnibaan, capable of placing Шаблон:Cvt payload into a Шаблон:Cvt orbit. The first commercial launch was expected in 2022. However, no launch happened in that year.

Файл:Reuniões com Autoridades e o Astronauta Russo Oleg Kotov (51685110523).jpg

Mockups of the Agnibaan launch vehicle and it's engine at the International Astronautical Congress 2021.

History

The company was founded by Srinath Ravichandran and Moin SPM within IIT Madras with a seed funding of Шаблон:INRConvert with aim to develop and launch its first rocket in 2021 and subsequently develop ability to provide launch service for satellites weighing up to Шаблон:Cvt. The start-up later managed to raise up to Шаблон:INRConvert from investors. Till end of 2020, the company had raised almost $4 million and headed towards the Indian Space Research Organisation (ISRO) for advisory. A Non-Disclosure Agreement (NDA) was signed with Department of Space to obtain government's technological assistance in development of launch vehicles. Although the company entered an agreement with Alaska Aerospace Corp. to launch rocket from Kodiak Launch Complex as a commercial launch pad to test rockets was not available in India, the deal eventually fizzled out as no progress was made with the vehicle. AgniKul has received investment from personal capacity of Anand Mahindra, chairman of Mahindra Group. Although, amount was not specified.

AgniKul signed a framework agreement with the Department of Space in September 2021 for access to ISRO facilities and technical expertise for the development of its two-stage small-satellite Agnibaan launch vehicle. On 7 November 2022, Agnikul Cosmos bought its first Flight Termination System (FTS) from ISRO. It will be used in Agnibaan scheduled for launch from Satish Dhawan Space Centre.

In October 2023, AgniKul raised $26.7 million in a Series B funding round, bringing the total capital raised since its inception to $40 million. Both existing and new investors participated in the round.

Development of engines

• In February 2021, Agnikul test fired its semi-cryogenic rocket engine Agnilet which will power second stage of its rocket Agnibaan for the first time. The engine has been developed in single-piece through 3D printing with no assembled parts.
• On 8 November 2022, Agnilet was successfully test fired for a few seconds on Vertical Test Facility, Thumba Equatorial Rocket Launching Station (TERLS), at Vikram Sarabhai Space Center (VSSC) to validate the design and manufacturing methodology used in the development process. AgniKul Cosmos holds the patent for design and manufacturing of single-piece rocket engine. The first dedicated factory to manufacture large number of 3D printed rocket engines is in IIT Madras Research Park.
• On 7 February 2023, flight acceptance test of Angilet for Agnikul's controlled sub-orbital flight was successfully conducted. The engine was completely manufactured at Agnikul's Rocket Factory - 1. In this particular test, engine was fired over and above the mission burn time as required for flight acceptance.

Launch vehicle

Файл:Agnibaan-rocket.svg

Agnibaan rocket's 2d model.

Agnibaan (Шаблон:Lit) is envisaged to be a mobile launch system capable of placing a Шаблон:Cvt satellite into a Шаблон:Cvt orbit. The rocket will be 18 meters long with a diameter of 1.3 meters and a lift-off mass of Шаблон:Cvt. It will use clustered engines on first stage in various configurations depending upon the payload and will only use LOX and Kerosene based engines. The rocket is supposed to be manufactured by 3D printing at whole. A single-stage suborbital demonstrator, nicknamed Agnibaan SOrTeD (Suborbital Tech Demonstrator), is scheduled to perform a test flight later in 2023.

Launch pad and mission control centre

AgniKul Cosmos inaugurated first private launchpad and mission control centre in India at the Satish Dhawan Space Centre (SDSC) in Sriharikota, Andhra Pradesh on 28 November 2022. The launchpad and the mission control centre are 4 km apart from one another. At present, the launchpad can handle liquid stage launch vehicle. All the critical systems performing functions at Agnikul launchpad (ALP) and the Agnikul mission control center (AMCC) have high degree of redundancy to ensure 100% operationality. ISRO's range operations team will monitor key flight safety parameters during launches from ALP while AMCC can share critical data with ISRO's Mission Control Center. Both the facilities have support of ISRO and Indian National Space Promotion and Authorisation Centre (IN-SPACe).

See also

• Agnibaan
• Skyroot Aerospace
• Bellatrix Aerospace
• Indian Space Research Organisation
• IN–SPACe
• Indian Space Association
• Space industry of India
• Department of Space

External links

• Шаблон:Official website