Английская Википедия:Alamein line

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Good article Шаблон:Short description Шаблон:Use dmy dates Шаблон:Use Australian English Шаблон:Infobox rail service The Alamein line is a commuter railway line in the city of Melbourne, Victoria, Australia.[1] Operated by Metro Trains Melbourne, it is the city's second shortest metropolitan railway line at Шаблон:Convert. The line runs from Flinders Street station in central Melbourne to Alamein station in the east, serving 18 stations via Burnley, Camberwell, Riversdale, and Ashburton.[1] The line operates for approximately 19 hours a day (from approximately 5:00 am to around 12:00 am) with 24 hour service available on Friday and Saturday nights. During peak hours, headways of up to 15 minutes are operated with services every 10–30 minutes during off-peak hours.[1] Trains on the Alamein line run with one or two three-car formations of X'Trapolis 100 trainsets.

Sections of the Alamein line opened as early as 1898, with the line fully extended to Alamein by 1948.[2] The Alamein line was originally part of the Outer Circle line which operated from 1890 until its closure in 1897. The line was built to connect Melbourne with the suburb towns of Camberwell and Ashburton, amongst others previously served by the Outer Circle line. Minor upgrades have occurred since its opening, including historical level crossing removal works and regular infrastructure upgrades.[3][4]

History

19th century

Шаблон:For What is now known as the Alamein line was opened as the Outer Circle Railway between 1890 and 1891. The segment still in use today was opened on 24 March 1890.[2]

20th century

The section from Camberwell to Ashburton was reopened 4 July 1898 and was operated by a steam locomotive and single carriage.[2] The northern section, from Riversdale to Deepdene, was reopened on 14 May 1900, with a steam train, known locally as the Deepdene Dasher, running between Ashburton and Deepdene at ~90-minute intervals, connecting at East Camberwell on the lower platform.[5] The Deepdene Dasher was the last passenger steam train in suburban Melbourne.[2]

A steam train at a platform in 1926.
The Deepdene Dasher steam train at Deepdene station, 1926.

Electrification of the Melbourne suburban rail network commenced in the 1920s. In 1923, the Railway Commissioners decided not to electrify the line from Deepdene through Riversdale to Ashburton, due to insufficient traffic levels, but would keep the issue under review.[2] Their position was partly reversed, with the Camberwell to Ashburton section later being included in the project. The last steam train ran to Ashburton on 29 October 1924 with electric train services commencing three days later in the form of shuttle trains from Camberwell to Ashburton, running every 40 minutes.[2]Шаблон:Sfn On 15 August 1926, the last steam train the Deepdene Dasher ran, and was replaced by a pair of AEC railmotors coupled back to back.Шаблон:Sfn The Commissioners intended to electrify the line if the volume of traffic increased, but that did not occur, and the service was replaced by road bus on 10 October 1927.[2] The electrified suburban service remains as today's Alamein line.

The line from Camberwell to the terminus was a single line with no crossing loops provided. The single train running operated a shuttle service along the line from Camberwell. Staff and Ticket safeworking was used, except between Camberwell and Riversdale where Lever Locking & Track Control was provided on 2 November 1924. Patronage and revenue on the line doubled after electrification, and on 12 October 1925 a 30 to 45 minute connecting service was provided to Ashburton.[2] From 26 November 1928 two trains were provided at peak hours, with a new crossing loop provided at Hartwell.[2] Through trains to the city at peak hour were provided from 17 May 1934. From 3 October 1938 the daytime off peak frequency was improved to 15 minutes.[6]

On 28 June 1948, the line was extended to the new Housing Commission of Victoria estate of Alamein, with some services extended to the new terminus.[6] After World War II, as part of Operation Phoenix, plans were drawn up to duplicate the line and provide a flying junction connection at Camberwell. It was authorised in 1951, but was delayed due to funding issues and other competing projects.[3] The first Шаблон:Convert long stage opened on 7 November 1954, from Hartwell to Ashburton stations, followed by the duplication and automatic signalling of the Шаблон:Convert stretch of line from Riversdale to Hartwell section on 31 July 1955. From 15 July 1955, Ashburton station ceased to be a regular terminus.[6] However, reduced loan funds for railway construction during 1955 and 1956 delayed the rest of the works, with the overpass and new line at Camberwell finally commissioned on 29 November 1959.[3] The last stage of the works had to wait until 8 November 1962 when automatic signalling was introduced between Hartwell and Ashburton, and the signal bay at Hartwell closed.[7]

From 9 July 1972, the service was cut to every hour on Sundays, and from 10 December 1973 it was changed to 20 minutes during the day and every 40 minutes at night and on Saturday afternoons. Through trains to Flinders Street off-peak were provided from 20 January 1975 at a frequency of every 15 minutes Monday to Friday, with Box Hill trains running express from Camberwell.[7]

Moves were made to close the line or convert it to light rail in the 1980s, as well as plans under the Kennett government to close the line in the early 1990s.[8] However, the Alamein line has remained open well into the 21st century.

21st century

The 2000s saw the introduction of the X'Trapolis 100 rolling stock on the line. The new stock features three doors per side on each carriage with the ability accommodate up to 456 seated passengers in each six-car configuration.[9]

Network and operations

Services

Services on the Alamein line operate from approximately 5:00 am to around 12:00 am daily.[1] In general, during peak hours, train frequency is 10–20 minutes while services during non-peak hours drop to 20–30 minutes throughout the entire route.[1] Due to the limited number of passengers on the Alamein line, services operate as a shuttle in off-peak times to Camberwell instead of continuing into the central business district.[1] On Friday and Saturday nights, services run 24 hours a day, with 60 minute frequencies available outside of normal operating hours.[10]

Train services on the Alamein line are also subjected to maintenance and renewal works, usually on selected Fridays and Saturdays.[11][12][13] Shuttle bus services are provided throughout the duration of works for affected commuters.[14]

Stopping patterns

Legend — Station status

  • Premium Station – Station staffed from first to last train
  • Host Station – Usually staffed during morning peak, however this can vary for different stations on the network.

Legend — Stopping patterns
Some services do not operate via the City Loop

  • ● – All trains stop
  • ◐ – Some services do not stop
  • ▲ – Only inbound trains stop
  • ▼ – Only outbound trains stop
  • | – Trains pass and do not stop

Шаблон:Table alignment

colspan="6" style="background:#Шаблон:Rcr;" |Alamein Services[15]
Station Zone Local Ltd Express Riversdale Shuttle
Шаблон:Rwsa 1
Шаблон:Rwsa
Шаблон:Rwsa
Шаблон:Rwsa
Шаблон:Rwsa
Шаблон:Rwsa
Шаблон:Htxt Шаблон:Rwsa
Шаблон:Rwsa Шаблон:Pipe
Шаблон:Htxt Шаблон:Rwsa Шаблон:Pipe
Шаблон:Rwsa
Шаблон:Rwsa Шаблон:Pipe
Шаблон:Rwsa
Шаблон:Htxt Шаблон:Rwsa
Шаблон:Htxt Шаблон:Rwsa
Шаблон:Htxt Шаблон:Rwsa
Шаблон:Htxt Шаблон:Rwsa
Шаблон:Rwsa
Шаблон:Htxt Шаблон:Rwsa

Operators

The Alamein line has had a total of 6 operators since its opening in 1898. The majority of operations throughout its history have been government run: from its first service in 1898 until the 1999 privatisation of Melbourne's rail network, four different government operators have run the line.[16] These operators, Victorian Railways, the Metropolitan Transit Authority, the Public Transport Corporation and Hillside Trains have a combined operational length of 101 years. Hillside Trains was privatised in August 1999 and later rebranded as Connex Melbourne. Metro Trains Melbourne, the current private operator, then took over the operations in 2009.[16][17][18] Both private operators have had a combined operational period of Шаблон:Age years.[19]

Past and present operators of the Alamein line:
Operator Assumed operations Ceased operations Length of operations
Victorian Railways 1898 1983 85 years
Metropolitan Transit Authority 1983 1989 6 years
Public Transport Corporation 1989 1998 9 years
Hillside Trains (government operator) 1998 1999 1 years
Connex Melbourne 1999 2009 10 years
Metro Trains Melbourne 2009 incumbent Шаблон:Age years (ongoing)

Route

Шаблон:Alamein LineШаблон:MaplinkШаблон:Infobox rail line The Alamein line forms a relatively straight route from the Melbourne central business district to its terminus in Alamein. The route is Шаблон:Convert long and is predominantly doubled-tracked, however between Flinders Street station and Richmond, the track is widened to 12 tracks, narrowing to 4 tracks between Richmond and Burnley before again narrowing to 2 tracks between Burnley and Glen Waverley.[20] After Ashburton, the line is narrowed to a single track which remains till its terminus in Alamein. After departing from its terminus at Flinders Street, the Alamein line traverses gentle hills with moderately heavy earthworks for most of the line. Some sections of the line have been elevated or lowered into a cutting to eliminate level crossings.[4] As of 2020, there are two level crossings remaining on the line with no current plans to remove them.[21]

The line follows the same alignment as the Belgrave, Glen Waverley, and Lilydale lines with the Glen Waverley line splitting off after Burnley and the three remaining services splitting off at Camberwell. The Alamein line continues on its southern alignment, whereas the Belgrave, and Lilydale lines takes an eastern alignment towards their final destinations.[22] All of the rail line goes through built-up suburbs towards its terminus in Alamein.[23]

Stations

The line serves 18 stations across Шаблон:Convert of track. The stations are a mix of elevated, lowered, underground, and ground-level designs. Underground stations are present only in the City Loop, with the majority of elevated and lowered stations being constructed as part of level crossing removals.[24]

Station Accessibility Opened Terrain Train connections Other connections
Flinders Street Yes—step free access 1854[25] Lowered Шаблон:Collapsible list Шаблон:Symbol Шаблон:Symbol
Southern Cross 1859[25] Ground level Шаблон:Collapsible list Шаблон:Symbol Шаблон:Symbol Шаблон:Symbol Шаблон:Symbol
Flagstaff 1985[25] Underground Шаблон:Collapsible list Шаблон:Symbol
Melbourne Central 1981[25] Шаблон:Symbol Шаблон:Symbol
Parliament 1983[25] Шаблон:Symbol
Richmond No—steep ramp 1859[25] Elevated Шаблон:Collapsible list Шаблон:Symbol Шаблон:Symbol
East Richmond Yes—step free access 1860[25] Ground level Шаблон:Collapsible list Шаблон:Symbol
Burnley No—steep ramp 1880[25]
Hawthorn 1861[25] Ground level Шаблон:Collapsible list Шаблон:Symbol Шаблон:Symbol
Glenferrie 1882[25] Elevated Шаблон:Symbol
Auburn Ground level Шаблон:Symbol
Camberwell Lowered Шаблон:Symbol Шаблон:Symbol
Riversdale 1890[25] Ground level
Wilison 1908[25]
Hartwell 1906[25]
Burwood 1890[25] Шаблон:Symbol
Ashburton Yes—step free access Шаблон:Symbol
Alamein 1948[25]
Station histories
Station Opened[26] Closed[26] Age Notes[26]
Шаблон:Rwsa Шаблон:TAC2
Шаблон:Rwsa Шаблон:TAC2
  • Formerly Museum
Шаблон:Rwsa Шаблон:TAC2
Шаблон:Rwsa Шаблон:TAC2
  • Formerly Batman's Hill
  • Formerly Spencer Street
Шаблон:Rwsa Шаблон:TAC2
  • Formerly Melbourne Terminus
Шаблон:Rwsa Шаблон:TAC2
Шаблон:TAC2
Шаблон:Rwsa Шаблон:TAC2
Punt Road Шаблон:TAC2
  • Replaced by Swan Street (200m further along line)
Шаблон:Rwsa Шаблон:TAC2
  • Formerly Swan Street
Шаблон:Rwsa Шаблон:TAC2
  • Formerly Church Street
Шаблон:Rwsa Шаблон:TAC2
  • Formerly Burnley Street
Шаблон:Rwsa Шаблон:TAC2
Шаблон:Rwsa Шаблон:TAC2
Шаблон:Rwsa Шаблон:TAC2
  • Formerly Glenferrie Road
Шаблон:Rwsa Шаблон:TAC2
  • Formerly Auburn Road
Шаблон:Rwsa Шаблон:TAC2
Шаблон:Rwsa Шаблон:TAC2
  • As part of the Outer Circle line
Шаблон:TAC2
  • Freight service
Шаблон:Rwsa Шаблон:TAC2
  • As part of the Outer Circle line
Шаблон:TAC2
Шаблон:Rwsa Шаблон:TAC2
  • Formerly Stanley
  • Formerly Balwyn
Шаблон:Rwsa Шаблон:TAC2
  • As part of the Outer Circle line
Шаблон:TAC2
Шаблон:Rwsa Шаблон:TAC2
  • Lower level
Шаблон:Rwsa Шаблон:TAC2
  • As part of the Outer Circle line
Шаблон:TAC2
Шаблон:Rwsa Шаблон:TAC2
  • Formerly Golf Links
Шаблон:Rwsa Шаблон:TAC2
  • Formerly Hartwell Hill
Шаблон:Rwsa Шаблон:TAC2
  • As part of the Outer Circle line
  • Formerly Hartwell
Шаблон:TAC2
  • Formerly Hartwell
Шаблон:Rwsa Шаблон:TAC2
  • As part of the Outer Circle line
  • Formerly Norwood
Шаблон:TAC2
Шаблон:Rwsa Шаблон:TAC2

Infrastructure

Rolling stock

The Alamein line uses X'Trapolis 100 electric multiple unit (EMU) trains operating in a one or two three-car configuration, with three doors per side on each carriage and can accommodate of up to 456 seated passengers in each six-car configuration.[9][27] The trains were originally built between 2002 and 2004 as well as between 2009 and 2020 with a total of 212 three-car sets constructed. The trains are shared with 7 other metropolitan train lines and have been in service since 2003.[28]

Alongside the passenger trains, Alamein line tracks and equipment are maintained by a fleet of engineering trains. The four types of engineering trains are: the shunting train; designed for moving trains along non-electrified corridors and for transporting other maintenance locomotives, for track evaluation; designed for evaluating track and its condition, the overhead inspection train; designed for overhead wiring inspection, and the infrastructure evaluation carriage designed for general infrastructure evaluation.[29] Most of these trains are repurposed locomotives previously used by V/Line, Metro Trains, and the Southern Shorthaul Railroad.[29]

Accessibility

In compliance with the Disability Discrimination Act of 1992, all stations that are new-built or rebuilt are fully accessible and comply with these guidelines.[30][31][32] Less than half of stations on the line are fully accessible as they haven't been upgraded to meet these guidelines.[33] These stations do feature ramps, however, they have a gradient greater than 1 in 14.[33] Stations that are fully accessible feature ramps that have a gradient less than 1 in 14, have at-grade paths, or feature lifts.[33][34] These stations typically also feature tactile boarding indicators, independent boarding ramps, wheelchair accessible myki barriers, hearing loops, and widened paths.[33][34]

Individual station upgrade projects have helped improve station accessibility on the line, however, only 40% of stations on the line are fully wheelchair accessible.[33][35]

Signalling

The Alamein line uses three-position signalling, which is used across the Melbourne train network. Three position signalling was first introduced on the line in 1919, with the final section to Ashburton converted to the new type of signalling in 1962.[5][26] Since Ashburton and Alamein stations are very close to each other, the single track between the two stations uses station limits working.[5][26]

References

Шаблон:Reflist

External links

Шаблон:Victorian Railway Lines