Английская Википедия:Alfa Romeo Boxer engine

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Infobox automobile engine The Alfa Romeo Boxer engine was a water-cooled flat-4 piston engine developed by Alfa Romeo for front-wheel drive, longitudinal applications. It debuted on the Alfasud, which was introduced in 1971 at the Turin Motor Show.[1] In the following decades the Boxer went through several upgrades and powered many Alfa Romeo front-wheel drive cars up to 1996 (not the 164). In 1997 it was phased out and replaced by the transversely-mounted Twin Spark engines.

Description

This liquid-cooled, four cylinder, boxer (horizontally opposed) engine had a belt-driven water pump. Its integrated cast iron cylinder block and crankcase had three main bearings. The two aluminum alloy crossflow cylinder heads had one or two overhead camshaft in each, driven by individual timing belts, and two valves per cylinder (four valves per cylinder in the 1700 16V version). Wet sump lubrication.[2]

The fuel delivery system depended on version: a single-barrel downdraft carburetor; one or two double-barrel downdraft carburetors; Bosch LE 3.1 Jetronic fuel injection (8 valve engines).;[3] or Bosch Motronic ML 4.1 fuel injection (16 valve engines).[4]

1200

The original engine displaced Шаблон:Convert (72 cu.in.) with an Шаблон:Convert bore and stroke and produced between Шаблон:Convert.[5]

Applications:

1300

The engine was stroked up to Шаблон:Convert to create the Шаблон:Convert version. This engine produced Шаблон:Convert.[3] A version of this engine (engine type 901.U0) was fitted with a catalytic converter, air injection, and evaporative emissions controls and received Californian emissions certification in 1976.[8] The Alfasud was nonetheless never exported to the United States.

Applications:

1400

The Шаблон:Convert was usually labelled a "1.3" in spite of its displacement. It produced Шаблон:Convert with one or two double-barrel carburettors.[10] It retained the Шаблон:Convert bore but used the 1500s Шаблон:Convert crankshaft.[5]

Applications:

1500

Файл:2011 NEC Classic Car Show Alfa Romeo Arna DSC 2210.jpg
Engine of Alfa Romeo Arna 1.5 Ti.

From 1978 until October 1986, the largest member of the family was the Шаблон:Convert "1500" with Шаблон:Convert bore and stroke.[5] It was built until 1995 and produced Шаблон:Convert.[3] This is the largest engine to have been installed in Alfasuds.[13]

Applications:

1600

The Шаблон:Convert produced Шаблон:Convert. Bore and stroke is Шаблон:Convert.[14]

Applications:

1700

In October 1986 the engine was increased in size to Шаблон:Convert (104 cu.in), it was used in the 33 and later Sprints, power was between Шаблон:Convert.[14] Bore and stroke is Шаблон:Convert.[7]

Applications:

1700 16V

In January 1990 a quad-cam 16-valve version of the venerable boxer was introduced; it was the most powerful to date, with Шаблон:Convert with or without catalytic converters. Only available in fuel-injected form, the 1.7 16V was equipped with the Bosch Motronic ML 4.1 system.[14]

The last Alfa Romeo flat-four engine was produced in 1997, after a run of 26 years.

Applications:

References

Шаблон:Reflist

Шаблон:Alfa Romeo