Английская Википедия:Alkylidene ketene

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Alkylidene ketenes are a class of organic compounds that are of the form R2C=C=C=O. They are a member of the family of heterocumulenes (R2C=(C)n=O), and are often considered an unsaturated homolog of ketenes (R2C=C=O). Sometimes referred to as methyleneketenes, these compounds are highly reactive and much more difficult to access than ketenes.

Because of their instability, alkylidene ketenes are often observed as reaction intermediates. While the parent alkylidene ketene propadienone only exists on the order of seconds in vacuum at room temperature,[1] other more highly substituted species are stable at room temperature.[2] A notable alkylidene ketene is carbon suboxide, of the structure O=C=C=C=O.[3]

Properties

Файл:Structure and intermolecular distances of propadienone.png
Propadienone structure (with distances in pm) as reported by Brown et al.[4]

Despite the nature of the multiple double bonds between heavy atoms in alkylidene ketenes, they have been to shown to adopt a slightly bent geometry that is not truly fully linear. Brown et al. found via the microwave spectra of 13C-labelled propadienone the structural parameters for this species, along with observed intersystem transitions that show that it converts between equivalent bent conformations, resulting in a molecular nonrigidity.[4] More recent studies of 1,2,3-triazole and imidazole-based alkylidene ketenes have confirmed similar bent structures via X-ray crystallography.[2][5]

IR and NMR analysis of the room-temperature stable 1,2,3-triazole stabilized alkylidene ketene suggests three major resonance structures as shown below.[2]

Resonance structures for 1,2,3-triazole-stabilized alkylidene ketenes
Resonance structures for 1,2,3-triazole-stabilized alkylidene ketenes

The alkylidene ketene group gives strong IR peaks around 2100 and 2085 cm−1, similar to previously studied trapped methyleneketenes,[6] and indicating π-backbonding character into CO. 13C-NMR indicates a negative charge on the α-carbon, supporting the zwitterionic resonance structure (pictured center above).[2]

Synthesis

The most common synthesis for substituted alkylidene ketenes is via the thermolysis of an alkylidene derivative of Meldrum's acid.[7] Some other common synthetic routes are summarized below. Notably, in 2021, Severin and Hansmann both reported novel synthetic methods for room-temperature stable alkylidene ketenes via N2/CO exchange from diazoalkenes stabilized by N-heterocyclic carbenes.[2][5]

Thermolysis of carboxylic acids and Meldrum's acid species

These reactions are typically done in the gas phase. Elimination of an α,β-unsaturated carboxylic acid is difficult since it requires breaking the C-H bond of an sp2 hybridized carbon. Presently, using a Meldrum's acid derivative as a starting material is the most common synthetic route for synthesizing alkylidene ketenes.

Thermolysis of acyl chloride to form alkylidene ketene
Thermolysis of acyl chloride to form alkylidene ketene[8]
Файл:Synth8-MeldrumAcidDeriv.png
Via thermolysis of alkylidene Meldrum's acid derivative[6]

Photochemical cleavage

Alkylidene ketenes can be generated by cleaving an α,β-unsaturated carbonyl or cyclic ketene with a combination of heat and irradiation. While this transformation can occur through thermolysis, this process proceeds much more easily via photoirradiation.[9]

Файл:Photochemical cleavage of alpha-methylene ketone to form methylene ketene.png
Photochemical cleavage of alpha-methylene ketone to form methylene ketene[10]
Файл:Synth2-PhotolysisOfAzetidinone.png
Ring opening of azetidinone to form methylene ketene[11]
Файл:Photolysis of 3-diazobenzofuranone to make ketene and o-quinoid methyleneketene.png
Photolysis of 3-diazobenzofuranone to make ketene and o-quinoid methyleneketene[12]

Via acid anhydride pyrolysis

Pyrolysis of anhydrides and intramolecular hydrogen transfer in a propiolic acid can also make alkylidene ketenes. This particular transformation is believed to go through a propiolaldehyde intermediate that generates acetylene via carbon monoxide loss.[13]

Файл:Methylene ketene from flash vacuum pyrolysis of acrylic anhydride.png
Methylene ketene from flash vacuum pyrolysis of acrylic anhydride[13]

Via N2/CO exchange

Reacting N-heterocyclic olefins with N2O to afford various diazoolefin species, Severin and Hansmann reported a method for generating highly thermally stable alkylidene ketenes via N2/CO exchange at atmospheric pressure.[2][5]

Файл:Synth9-SeverinSynth.png
Severin's synthesis of an alkylidene ketene via N2/CO exchange of an imidazole[5]
Файл:Synth10-HansmannSynth.png
Hansmann's synthesis of an alkylidene ketene via N2/CO exchange of a 1,2,3-triazole[2]

Reactions

Dimerization

Alkylidene ketenes can readily dimerize and participate in cycloaddition reactions. Often orange or red in color, these dimers can be generated both in solution and via pyrolysis.[14] Dimer formation is typically inhibited at the low temperatures used to analyze monomer species (especially methylene ketene monomers), but once the dimers are formed, it is often impossible to convert back to its substituent monomers even via thermolysis at high temperatures.[15]

Файл:React1-Dimerization.png
Dimerization of phenyl-substituted alkylidene ketene and subsequent reaction in sodium methoxide[15]

Cycloaddition

Various cycloadducts of alkylidene ketenes can be made, including the addition of an alkylidene ketene and ketene depicted below. When reacting with either ketene or dimethylketene, the formation of the β-lactone product was favored, as this cyclization occurs via an attack on the terminal ketene carbonyl.[16]

Файл:React2-Cycloaddition.png
Cycloaddition of dimethylmethyleneketene and ketene to form a β-lactone and a cyclic 1,3-diketone[16]

Reactions with nucleophiles

Alkylidene ketenes react similarly to ketenes in the presence of nucleophiles, often generating equal amounts of E and Z isomers in α,β-unsaturated esters. Secondary isomerism in pyrolytic systems can, however, result in the isolation of a thermodynamic product, as is the case with the generation of phenyl-substituted methylene ketene from a Meldrum's acid derivative and hot methanol vapor.[14] Other alkyl substitutions can also lead to β,γ-unsaturated products.[17] This migration of the double bond can occur via secondary photoenolization, deconjugation of unsaturated products, or isomerization to a vinylidene ketene.[18]

Decarbonylation

Decarbonylation has been observed but is thermodynamically difficult to achieve with an activation energy of over 40 kcal mol-1. However, the overall decarbonylation of propadienone to ethyne and carbon monoxide is exothermic by 2 - 5 kcal mol−1.[19]

Файл:React3-Decarbonylation2.png
Decarbonylation scheme for propadinone to ethyne and carbon monoxide

As C-donor ligand for transition and main group metals

Severin reported coordination chemistry using an imidazole-stabilized alkylidene ketene. Coordination increased the C-C-CO bond angle and bond lengths, indicating increased ylidic character.[20] Using the average CO stretching frequency as a measure of donor strength, the alkylidene ketene is weaker than its diazoolefin starting material, but stronger than N-heterocyclic carbenes.[21]

Файл:React4-MetalLigand.png
Representative metal complexes with alkylidene ketene as a C-donor ligand[5]

See also

References

Шаблон:Reflist