Английская Википедия:American Computer and Peripheral

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:Infobox company American Computer & Peripheral, Inc. (AC&P), also written as American Computer and Peripheral, was an American computer company based in Santa Ana, California. The company was founded in 1985 by Alan Lau and released several expansion boards for the IBM PC as well as a few PC clones before going bankrupt in December 1989. Obscure in its own time,Шаблон:Sfnm the company's 386 Translator was the first plug-in board for Intel's newly released 80386 processor and the first mass-market computing device to offer consumers a means of using the 386 in July 1986.Шаблон:Sfnm

History

PC clones and peripherals

Шаблон:Multiple image American Computer and Peripheral was founded in Santa Ana in April 1985 by Alan Lau.Шаблон:Sfnm Among the company's first offerings were a duo of IBM PC clones: the American XTSR and the American 286. These clones were introduced in May 1986 and were clones of IBM's PC XT and PC/AT, respectively. The clock speed of the XTSR's Intel 8088 microprocessor was selectable, allowing users to change it from 4.77 MHz to 7.37 MHz.Шаблон:Sfn The module that allowed this selection of clock speeds was later sold separately as the American Turbo.Шаблон:SfnШаблон:Efn The American 286 featured a motherboard in the Baby AT form factor with five expansion slots house in the same case as the American XTSR.Шаблон:Sfnm AC&P later introduced the American 286-A, an AT clone with a full-sized AT motherboard, featuring eight expansion slots.Шаблон:Sfn AC&P hired Chi Yeung, previously a designer for Eagle Computer before the company went out of business in 1986, to design the 286-A.Шаблон:Sfn Both it and the regular 286 ran the Intel 80286, with clock speeds selectable from 6 MHz to 8 MHz.Шаблон:Sfnm In June 1986, the company released the Abovefunction multifunction board that allows the PC, PC XT and compatibles to address up to 2 MB of RAM, as well as adding ports for joysticks and serial and peripheral devices.Шаблон:Sfn A year later, the company introduced the American 386-16, an i386-based desktop computer that touted superiority over other 386 clones due to its use of zero-wait states when accessing video and making system calls to the BIOS for peripheral access.Шаблон:Sfn

Upgrade devices

In June 1986, AC&P released the 386 Translator.Шаблон:Sfn This was a module that could be plugged into the pin-grid array socket reserved for the 80286 microprocessor on the motherboard of IBM's PC/AT or clones of the AT, in order to upgrade them to the newer 80386 by Intel.Шаблон:Sfn This product allowed AC&P to beat Compaq by a slim margin in offering consumers the first means through which they could interact with the 386.Шаблон:Sfn Compaq released the Deskpro 386, the first PC clone that featured a 386—and which marked the first time a major component to the IBM PC standard was upgraded by a company outside IBM—in September 1986.Шаблон:SfnШаблон:Efn The 386 Translator was designed by NDR, a electronics design firm located in Corona, California.Шаблон:Sfn Scheduled for release as soon as Intel started shipping the chip out to computer vendors like AC&P,Шаблон:Sfn which occurred in mid-July along with Intel shipping production samples of the 386 to consumers,Шаблон:Sfn AC&P launched the 386 Translator ahead of time in late June.Шаблон:Sfn

Various companies such as Daisy Systems and Valid Logic Systems manufactured software development workstations equipped with the 386 microprocessor and running Intel's own assembler, compilers, and software utilities as early as December 1985, when pre-production batches of 386es were manufactured. However, these workstations were large, cumbersome to set up and expensive, costing several thousands of dollars.Шаблон:Sfn The 386 Translator, by comparison, cost $895 (equivalent to $Шаблон:Inflation in Шаблон:Inflation/year) with a 386 included or $395 ($Шаблон:Inflation in Шаблон:Inflation/year) without.Шаблон:Sfn In addition, existing ATs could be equipped with the 386 using AC&P's module, avoiding the need for a dedicated workstation. Counter-intuitive to the nature of an upgrade module, however, the 386 Translator ran an AT computer 10 percent Шаблон:Em than a stock computer with a 286. This was due to the module inserting wait states in order for slower AT-grade memory chips to work with the faster 386. Aside from this performance penalty, the 386 Translator allowed software developers with ATs to get a head start on learning 386's new virtual 8086 mode.Шаблон:Sfn According to David Springer of NDR, the 386 Translator was also targeted at high-end users wanting to set up a file server on an AT-class machine.Шаблон:Sfn

Файл:American 386 Turbo.jpg
386 Turbo, showing ISA card with 386 and processor module connected via two ribbon cables

Just three months after the release of the 386 Translator, in November, AC&P introduced the 386 Turbo expansion board. Like the Translator, the Turbo board allowed users to upgrade their existing PC/ATs with the 386 processor, this time with the promise of increased speed over the AT's 286 processor.Шаблон:Sfn The Turbo 386 also advertised compatibility with AT clones, although only clones whose motherboards had a socket for the pin grid array package of the 286 were supported.Шаблон:Sfn The company touted a 400 percent increase in software performance and claimed that the Turbo could double the clock speeds of ATs running between 6 and 12 MHz.Шаблон:Sfn The company later revised their claim to only double the clock speeds of 6 and 8 MHz 286s,Шаблон:Sfn as 386 processors at the time were not rated for 24 MHz.Шаблон:Sfn The 386 Turbo allowed users to switch the clock speed of the 386 on the fly, and it also included 1 MB of cache memory.Шаблон:Sfn

AC&P recommissioned NDR for the design of the 386 Turbo.Шаблон:Sfn It was comparable to Intel's Inboard 386, which came out at the same time. Both boards plugged into one of the AT's 16-bit ISA expansion slots. While Intel offered a version of the Inboard that could work on XTs, the 386 Turbo could only be used by ATs.Шаблон:Sfn The Turbo's 1 MB of memory was strictly used for cache, while the Inboard could accept up to 4 MB of memory chips to be used as conventional RAM, on top of having 64 KB of cache memory itself.Шаблон:Sfn The Turbo was to be accompanied by a graphics accelerator card, dubbed the "Turbo Graphics Adapter", which would have included a 82786 graphics processing unit for use with CADCAM systems. Scheduled for release alongside the 386 Translator in November, it was ultimately shelved.Шаблон:Sfn

Reputation

AC&P's peripherals received mixed reviews throughout the company's short life. Stephen Satchell of InfoWorld found that the Turbo 386 failed to double the performance of ATs with 6 MHz 286 processors, as claimed by the company, instead only increasing performance by 83 percent. He felt that this was the product's biggest downfall, because 6 MHz ATs had the slowest clock speeds of the AT class, and thus users with these computers would have been the perfect market for the Turbo. Satchell contrasted the Turbo with Intel's Inboard, which increased performance of 6 MHz ATs by 250 percent,Шаблон:Sfn surmounting even the Turbo's boost on 8 MHz machines.Шаблон:Sfn Howard Marks of PC Magazine found the increased performance adequate on his AT but panned the lack of memory beyond the 1 MB used for cache; access to memory on the computer's motherboard above 1 MB would be bottlenecked by the AT's 16-bit data bus, negating the processing speed of the 386.Шаблон:Sfn Satchell praised the company's Abovefunction as a bargain, on the other hand.Шаблон:Sfn

The poor quality of the documentation provided with the company's products was a source of frequent criticism. Of the Turbo 386, Satchell wrote that its manual was "lacking in several key areas. Both the wording and the diagrams are unclear, and a user could easily damage the system board by removing the 286 chip as directed in the manual".Шаблон:Sfn Marks found an error in the same manual: a jumper on the board was factory-set to "slow mode" as stated in the manual, underclocking the 386 to be later configured for "fast mode" in a program provided with the Turbo 386. However Marks discovered that the Turbo 386 only worked on his PC AT with jumper configured for "fast mode"—the AT displayed nothing when he first turned it on with the Turbo 386 configured to "slow mode", leading him to believe that he had destroyed his computer.Шаблон:Sfn When the company released a mouse in 1987, Christopher Barr of PC Magazine found that it only worked with Mouse Systems drivers not included with the mouse, a trait not mentioned in its manual.Шаблон:Sfn

The company declared bankruptcy in 1989, just four years after its incorporation.Шаблон:Sfn It was suspended from the Franchise Tax Board of California in 1990.Шаблон:Sfn

Notes

Шаблон:Notelist

Citations

Шаблон:Reflist

References

Шаблон:Refbegin

Шаблон:Refend

External links