Английская Википедия:Anaconda Smelter Stack

Содержание

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Шаблон:Short description Шаблон:Use mdy dates Шаблон:Infobox NRHP The Anaconda Smelter Stack is the tallest surviving masonry structure in the world, with an overall height of about Шаблон:Nowrap, including a brick chimney Шаблон:Nowrap tall and the downhill side of a concrete foundation Шаблон:Nowrap tall.Шаблон:Efn-ua It is a brick smoke stack or chimney, built in 1918 as part of the Washoe Smelter of the Anaconda Copper Mining Company (ACM) at Anaconda, Montana, in the United States. A terra cotta coating covered the entire brick chimney when new, but by the time the smelter closed in 1981, most had eroded away except for the upper 40%, exposing most of its bricks and reinforcing rods. The inside diameter at the bottom of the brick chimney is Шаблон:Nowrap while that at the top is about Шаблон:Nowrap. The stack and its viewing area are now the two-part Anaconda Smoke Stack State Park.

Dimensions

Brick chimney

The overall height of the stack is Шаблон:Nowrap Шаблон:Nowrap,Шаблон:Efn-ua including a brick chimney Шаблон:Nowrap Шаблон:Nowrap tall and the downhill side of a concrete foundation Шаблон:Nowrap high. This was the height when new in 1918, but loss of the terra cotta that covered the top course of bricks since then reduced its height one or more inches. The lowest Шаблон:Nowrap of the brick chimney is an octagon, the vertices of which point to the cardinal and intercardinal directions, north, northeast, east, etc., while its sides face the secondary-intercardinal directions, north-northeast, east-northeast, etc. Two large vertical openings are in the octagonal portion, each Шаблон:Nowrap, on its east-southeast and south-southwest sides. When operational, the main flue carried hot exhaust gases to these openings and then into the stack from the smelter which was on the north side of the hill upon which the stack rests. The base of the octagon was Шаблон:Nowrap Шаблон:Nowrap side to side across its bottom before the loss of its terra cotta covering. But the inner surface of the octagon is circular with an inside diameter of Шаблон:Nowrap Шаблон:Nowrap across its bottom. The wall thickness of the octagon at its bottom ranges from Шаблон:Nowrap at the center of a side to Шаблон:Nowrap at each vertex. The rest of the chimney is a slightly tapering cylinder with a top inside diameter of Шаблон:Nowrap Шаблон:Nowrap and a wall thickness of Шаблон:Nowrap Шаблон:Nowrap just below a slightly flared top. Its cylindrical portion plus the top Шаблон:Nowrap of the octagon are encircled by many large steel rods (called bands) for reinforcement. It has had 20 lightning rods around its rim since it was built (which are not included in its height). The stack contains 2,464,652 locally manufactured perforated tile bricks, each averaging 2.7 times larger by volume than the size of a normal brick.Шаблон:Efn-ua Most are radial bricks that are curved to match a sector of a cylindrical wall. The brick chimney weighs Шаблон:Nowrap.Шаблон:Efn-ua

Concrete foundation

The lowest part of the stack is a concrete foundation or footing that is built on sloped ground with a grade of Шаблон:Nowrap because it is just below the top of a hill. It is Шаблон:Nowrap high above ground at its downhill side and Шаблон:Nowrap high above ground at its uphill side. It is a hollow octagon, Шаблон:Nowrap side to side on top and Шаблон:Nowrap side to side across its bottom, Шаблон:Nowrap high on its downhill side and Шаблон:Nowrap high on its uphill side, a third of the foundation being below ground. The stepped bottom of the foundation fits the stepped rock formation upon which it rests. The floor of the stack is generally conical leading Шаблон:Nowrap down below the brick chimney to a Шаблон:Nowrap rectangular grate, then into a Шаблон:Nowrap square horizontal duct that exits the stack at the center of the downhill side of the foundation on its south-southeast side. This allowed any valuable metal dust particles left in the flue gases that precipitated down to that conical floor to be collected by a car on a track within the duct and sent back to the smelter for more processing.

Construction

After the concrete foundation was completed in May 1918, construction of the stack began on Шаблон:Nowrap and was completed on Шаблон:Nowrap. It was placed into operation on Шаблон:Nowrap. It was built by the Alphons Custodis Chimney Construction Company of New York (now Hamon Custodis) under the direction of W. C. Capron, mechanical superintendent of the Washoe Smelting Company. Much of the ore the smelter processed after 1955 came from the Berkeley Pit just north of Butte, Montana. At the time it was built, the stack was the tallest masonry, brickwork structure and chimney of any kind in the world and it remains the world's tallest surviving masonry structure. Taller masonry chimneys have existed but have since been demolished. Taller chimneys that still exist are made of reinforced concrete. See List of tallest chimneys.

The Washington Monument would fit inside the stack's brick portion except for their lowest Шаблон:Nowrap where an overlap of as much as Шаблон:Nowrap at each corner of the monument would occur.Шаблон:Efn-ua The stack's brick portion is about Шаблон:Nowrap taller than the monument's 2015 height.Шаблон:Efn-ua The masonry portion of the stack is about Шаблон:Nowrap taller than the above ground portion of the monument's masonry, which disregards the monument's aluminum apex.

The stack was designed to discharge exhaust gases from the various roasting and smelting furnaces at the smelter. The smelter had a large network of exhaust flues from the furnaces that all fed a main flue, which carried them a half-mile south up the hill to the stack. The flue system and stack combined to provide a natural draft capable of carrying Шаблон:Convert per minute of exhaust gases.

State park

The Washoe Smelter was demolished after its closure in 1981. The stack alone, however, remains standing because the citizens of Anaconda organized to "Save the Stack." It is commonly referred to as "The Stack" or "The Big Stack"Шаблон:Efn-ua and is a well-known landmark in western Montana. In 1986 it was designated the Anaconda Smoke Stack State Park. The park has two parts: the Washoe Smelter Stack Viewing Center constructed in 2000 just east of the town of Anaconda and the smoke stack about Шаблон:Convert southeast of the viewing area. Although the site of the smelter underwent some environmental cleanup, the general public is not allowed access to the stack itself because the soil around it is still hazardous due to contamination by the toxic metalloid arsenic as well as copper, cadmium, lead and zinc. Terra cotta covered the entire surface of the chimney just as it covered its top; by the time of its closure, the bottom 60% had eroded, including the brick octagon, exposing its bricks and reinforcing rods. The terra cotta is now darker than the exposed bricks.

See also

• Flue gas stack

External links

• Anaconda Smoke Stack State Park Montana Fish, Wildlife & Parks
• Smelter history in brief
• Anaconda Smelter Stack Atlas Obscura
• Revisiting Montana's Historic Landscape
• Superfund Site: Anaconda Co. Selter, Anaconda, MT