Файл:Backward diode.svgThe schematic symbol for the backward diode[1] annotated to show which side is P type and which is N; current flows most easily from N to P, backward relative to the arrow.Файл:Backward diode IEEE 315.svgBackward diode symbol according to IEEE 315
In semiconductor devices, a backward diode (also called back diode[2]) is a variation on a Zener diode or tunnel diode having a better conduction for small reverse biases (for example –0.1 to –0.6 V) than for forward bias voltages.
The reverse current in such a diode is by tunneling, which is also known as the tunnel effect.[3][4][5]
Current–voltage characteristics of backward diode
Файл:Backward Diode Band Diagram.svgBand diagram of a backward diode. Electron energy is on the vertical axis, position within the device is on the horizontal axis. The backward diode has the unusual property that the so-called reverse bias direction actually has more current flow than the so-called forward bias.
The forward I–V characteristic is the same as that of an ordinary P–N diode. The breakdown starts when reverse voltage is applied. In the case of Zener breakdown, it starts at a particular voltage. In this diode the voltage remains relatively constant (independent of current) when it is connected in reverse bias. The backward diode is a special form of tunnel diode in which the tunneling phenomenon is only incipient, and the negative resistance region virtually disappears. The forward current is very small and becomes equivalent to the reverse current of a conventional diode.
Applications of backward diodes
Detector
Since it has low capacitance and no charge storage effect,[4] and a strongly nonlinear small-signal characteristic, the backward diode can be used as a detector up to 40 GHz.
Rectifier
A backward diode can be used for rectifying weak signals with peak amplitudes of 0.1 to 0.7 V.
Switch
A backward diode can be used in high speed switching applications.