Английская Википедия:Beattie well tanks

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

The Beattie well tanks were a series of 111 steam locomotives of seven different designs produced for the London and South Western Railway (LSWR) between 1852 and 1875. All carried the water supply in well tanks, set low down between the frames. All had six wheels; the first three designs were of the 2-2-2WT wheel arrangement, the last four being 2-4-0WT. Most were designed by Joseph Hamilton Beattie, the LSWR Mechanical Engineer, but the last few locomotives built to the seventh design incorporated modifications made by his son and successor, William George Beattie. Most were intended for the LSWR's suburban services, but were later used elsewhere on the LSWR system before withdrawal. Apart from three locomotives which lasted until 1962, withdrawal occurred between 1871 and 1899.

Background

The LSWR developed an extensive network of suburban lines in south-west London between the 1840s and the 1880s. Initially, these services were operated using tender locomotives. mainly 2-2-2s, designed by John Viret Gooch, the LSWR Locomotive Superintendent.

In 1850, the LSWR decided that the London suburban passenger services should be operated using small tank locomotives. To determine the most suitable type, Gooch's successor Joseph Hamilton Beattie, the LSWR Mechanical Engineer, prepared a series of designs for six-wheeled well tank locomotives, each of which incorporated one or more differences from the previous class. A small quantity of each was produced: between 1852 and 1859, 26 were built, to six different designs, followed by a seventh design built in much larger numbers.

2-2-2 well tanks

Файл:LSWR Suburban 1850.gif
The LSWR suburban system as at December 1850

Tartar class

Six locomotives (nos. 2, 12, 13, 17, 18, 33) built by Sharp Brothers (works numbers 689–694) and delivered in May–July 1852. These were of the 2-2-2WT wheel arrangement, having a wheelbase of Шаблон:Convert, driving wheels of Шаблон:Convert diameter, leading and trailing wheels of Шаблон:Convert diameter, and cylinders measuring Шаблон:Convert mounted outside the frames. The main frames were positioned inside the wheels, but an additional set of outside frames supported the trailing axle, and the leading axle also had outside bearings attached to springs below the slide bars. The boiler had a grate area of Шаблон:Convert, a heating surface totalling Шаблон:Convert and worked at a pressure of Шаблон:Convert. The well tanks held Шаблон:Convert of water, and the bunker held Шаблон:Convert of coke. The weight was Шаблон:Convert in working order.Шаблон:Sfn

When new, they were used on the London suburban services, but by mid-1860 had moved west – three were used in the Exeter area, two on the Seaton branch line, and one on the Chard branch line. Later on, some were used on the Lymington branch line, but by the end of 1867 all were on the Exmouth branch. No. 18 was withdrawn in 1871, and the others followed at intervals unlil the last one, no. 17, was withdrawn in 1874.Шаблон:Sfn

Sussex class

Eight locomotives (nos. 1, 4, 6, 14, 15, 19, 20, 36) built by the LSWR at Nine Elms in May–December 1852. They differed from the Tartar class in several ways, primarily in using smaller driving wheels of Шаблон:Convert diameter. Other differences included the grate area of Шаблон:Convert, heating surface totalling Шаблон:Convert, water capacity Шаблон:Convert and the weight was Шаблон:Convert in working order. There were variations within the class: the leading and trailing wheels were Шаблон:Convert for five locomotives, but nos. 1, 14 and 15 were Шаблон:Convert; the cylinder bore of the first five was Шаблон:Convert, that of the last three was Шаблон:Convert.Шаблон:Sfn

As with the Tartar class, they were originally used in the London area, but later moved elsewhere – three were operating in the Southampton area by 1864, and others were used in the Exmouth, Poole and Yeovil areas. Between 1870 and 1872 they were transferred to the duplicate list, the numbers being prefixed with a zero in the records – for example, no. 1 became no. 01 in July 1870. This was done in order to release their old numbers for new locomotives, including no. 36 of the 298 class. Withdrawal occurred between 1871 and 1877.Шаблон:Sfn

Chaplin class

Three locomotives (nos. 9, 10, 34) built at Nine Elms in July–August 1856, they differed from the Sussex class in having Шаблон:Convert trailing wheels, water capacity Шаблон:Convert and coke capacity Шаблон:Convert.Шаблон:Sfn

After use in the London area, they moved to Bishopstoke or Salisbury, and were later used at Stokes Bay, Dorchester and Bournemouth. They were transferred to the duplicate list in 1870–74 (no. 9 becoming no. 09, etc.) and were withdrawn in 1876–77.Шаблон:Sfn

Earlier 2-4-0 well tanks

Minerva class

Three locomotives (nos. 11, 16, 39) built at Nine Elms in May–July 1856. Generally larger than the preceding designs, they were of the 2-4-0WT wheel arrangement, having coupled wheels of Шаблон:Convert diameter, leading wheels of Шаблон:Convert diameter, and cylinders measuring Шаблон:Convert mounted outside the frames. The boiler had a grate area of Шаблон:Convert, a heating surface totalling Шаблон:Convert and worked at a pressure of Шаблон:Convert. The well tanks held Шаблон:Convert of water, and the bunker held Шаблон:Convert of coke. The weight was Шаблон:Convert in working order.Шаблон:Sfn

Originally used around London, two moved to Woking by 1866 and the other one to Guildford. Later they were used at Salisbury, and one was eventually at Bournemouth. They were transferred to the duplicate list in 1872–74 (no. 11 becoming no. 011, etc.), and were withdrawn in 1874–83.Шаблон:Sfn

Nelson class

Three locomotives (nos. 143–145) built at Nine Elms in July–August 1858. Differences from the Minerva class were in the coupled wheels, which were Шаблон:Convert diameter, the cylinders, which measured Шаблон:Convert, and the water capacity which was increased to Шаблон:Convert. The leading axle had no outside bearings.Шаблон:Sfn

The names were all of former admirals in the Royal Navy: 143 Nelson, 144 Howe and 145 Hood. These were intended for the Lymington branch, but only one was sent there initially – the other two went to London. All three had moved to Exeter by 1867, later on, they were used in other areas such as Ash, Weymouth and Yeovil. Transfer to the duplicate list occurred in 1880–81 (the three becoming nos. 0143–0145), followed by withdrawal in 1882–85.Шаблон:Sfn

Nile class

Three locomotives (nos. 154–156) built at Nine Elms in April–May 1859. Based on the Minerva class, several changes were made to the dimensions. The wheelbase was Шаблон:Convert, the coupled wheels Шаблон:Convert diameter, and the cylinders had a bore of Шаблон:Convert. The boiler had a grate area of Шаблон:Convert, a heating surface totalling Шаблон:Convert and worked at a pressure of Шаблон:Convert. The well tanks held Шаблон:Convert of water. The weight was Шаблон:Convert in working order.Шаблон:Sfn

The names were all of historic battles: 154 Nile, 155 Cressy and 156 Hogue. After use in London, they moved to other places like Dorchester, Exeter, Gosport, Guildford or Weymouth. They were withdrawn in 1882.Шаблон:Sfn

Standard 2-4-0 well tanks: 298 class

Шаблон:Main Having chosen the most suitable characteristics, Beattie prepared a standard design of 2-4-0WT with Шаблон:Convert driving wheels and cylinders Шаблон:Convert, bore by stroke; and the LSWR began to take delivery of these in 1863.Шаблон:Sfn The new design eventually totalled 85 locomotives; most came from the Manchester firm of Beyer, Peacock and Company between 1863 and 1875, but three were built in the LSWR workshops at Nine Elms during 1872.Шаблон:Sfn Their numbers were 33, 34, 36, 44, 76, 177–220, 243–270, 298, 299, 314 and 325–329.Шаблон:Sfn

Locomotive names

All of the earlier locomotives were named, together with five of the 298 class. The names were as follows:

List of namesШаблон:Sfn
Number Name Class Built
1 Sussex Sussex Шаблон:Dts
2 Tartar Tartar Шаблон:Dts
4 Locke Sussex Шаблон:Dts
6 Cossack Sussex Шаблон:Dts
9 Chaplin Chaplin Шаблон:Dts
10 Aurora Chaplin Шаблон:Dts
11 Minerva Minerva Шаблон:Dts
12 Jupiter Tartar Шаблон:Dts
13 Orion Tartar Шаблон:Dts
14 Mercury Sussex Шаблон:Dts
15 Mars Sussex Шаблон:Dts
16 Salisbury Minerva Шаблон:Dts
17 Queen Tartar Шаблон:Dts
18 Albert Tartar Шаблон:Dts
19 Briton Sussex Шаблон:Dts
20 Princess Sussex Шаблон:Dts
33 Phoenix Tartar Шаблон:Dts
33 Phoenix 298 Шаблон:Dts
34 Osprey Chaplin Шаблон:Dts
34 Osprey 298 Шаблон:Dts
36 Comet Sussex Шаблон:Dts
36 Comet 298 Шаблон:Dts
39 Wizard Minerva Шаблон:Dts
44 Pluto 298 Шаблон:Dts
76 Firefly 298 Шаблон:Dts
143 Nelson Nelson Шаблон:Dts
144 Howe Nelson Шаблон:Dts
145 Hood Nelson Шаблон:Dts
154 Nile Nile Шаблон:Dts
155 Cressy Nile Шаблон:Dts
156 Hogue Nile Шаблон:Dts

Locomotives numbered between 1 and 76 were built as replacements for older locomotives, and used both the number and name of the locomotive being replaced.Шаблон:Sfn

Notes

Шаблон:Reflist

References

Шаблон:LSWR Locomotives