Английская Википедия:Beretta 21A Bobcat
The Beretta 21A Bobcat is a semi-automatic pocket pistol designed by Beretta in Italy. Production began in the late 1984, solely in the Beretta U.S.A. facility in Accokeek, Maryland. It is a further development of the Beretta Model 20, whose production ended in 1985.Шаблон:Sfnp
Design
The Beretta 21A Bobcat is available chambered for either .22 LR or .25 ACP (6.35 mm) ammunition. It has a simple blowback operation, with a single- and double-action trigger mechanism, and exposed hammer. It has a magazine release button in the left side grip, located between the grip retaining screws. The frame is made out of aluminum alloy; the slide and barrel are either carbon steel or stainless steel, depending on the model.Шаблон:Sfnp According to Beretta, the pistol is intended for off duty police and pistol carry permit holders that seek a highly concealable, but reliable pistol designed for self-defense.[1]
Safety features
It is fitted with a frame-mounted, thumb-operated rear-locking safety, which also blocks the slide. This can be applied with the hammer fully down, or cocked. The hammer has a half-cock safety notch. There is an inertia type firing pin design.Шаблон:Sfnp
Unique features
One defining feature of this pistol is the 'tip-up' barrel. The barrel pivots on a pin under the muzzle so that the chamber may be loaded with the slide in the closed position. It is released by a lever on the left side of the frame, above the trigger. This simplifies loading, unloading, and checking load status, as the slide can be difficult for some people to retract by hand.Шаблон:Sfnp
The Bobcat was designed without an extractor, relying on pressure from the expanding gases of the fired cartridge to simply blow spent cases from the chamber. This makes it particularly sensitive to choice of ammunition for dependable operation.Шаблон:Sfnp
The weapon design creates a unique ejection path. Instead of ejecting spent brass to the side as do most semi-automatic hand guns, the Bobcat ejects the spent brass backwards and up.
Variants
The Bobcat 21A is available in either .22 LR with 7-round magazine capacity or .25 ACP (6.35 mm) with 8-round magazine capacity. The .22 LR version is currently available in either matte black (Beretta's "Bruniton" finish) or stainless steel ("Inox") versions. The .25 ACP model is available in black only.[1]
In the .22 LR "Inox" version (introduced in 2000Шаблон:Sfnp) only the barrel and slide are stainless steel, and the alloy frame has a matte light gray Bruniton coating. The remainder of the gun is unchanged.[1]
-
Showing relative size.
-
Suppressed Beretta 21A.
See also
References
Bibliography
External links
Шаблон:Beretta firearms Шаблон:Use dmy dates
- Страницы с неработающими файловыми ссылками
- Английская Википедия
- Beretta pistols
- .22 LR pistols
- .25 ACP semi-automatic pistols
- Semi-automatic pistols of Italy
- Semi-automatic pistols of the United States
- Страницы, где используется шаблон "Навигационная таблица/Телепорт"
- Страницы с телепортом
- Википедия
- Статья из Википедии
- Статья из Английской Википедии
