Английская Википедия:Board track racing

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Файл:Laurel Board Track Race Jul 11 1925.jpg
Race teams grid-up for the start of a race at Baltimore-Washington Speedway in 1925.

Board track racing was a type of motorsport popular in the United States during the 1910s and 1920s. Competition was conducted on circular or oval race courses with surfaces composed of wooden planks. This type of track was first used for motorcycle competition, wherein they were called motordromes, before being adapted for use by various different types of racing cars. The majority of the American national championship races were contested at such venues during the 1920s.

Board tracks proliferated in part because they were inexpensive to construct, but they lacked durability and required a great deal of maintenance to remain usable. Many of the tracks survived for as little as three years before being abandoned.

With the onset of the Great Depression in the early 1930s, board track racing disappeared rapidly. However, several of its most notable aspects have continued to influence American motorsports up to the present day, including: A technical emphasis on raw speed produced by the steep banking; ample track width to allow steady overtaking between competitors; and the development of extensive grandstands or stadium-style spectator seating surrounding many of the courses.

History

Файл:UniontownPennsylvaniaBoardTrack1916Construction.jpg
Construction of a board track at Uniontown, Pennsylvania in 1916
Файл:1912 Indian Board Track Racer.jpg
1912 Indian Board Track Racer, on display at the California Automobile Museum
Файл:1911boardtrackracing.jpg
Motorcycles racing on a board track in 1911
Файл:Los angeles motordrome postcard.jpg
Some early board tracks were circular. This is a view of the Los Angeles Motordrome, the first of its kind.
Файл:Barneyboards17March1915.jpg
Barney Oldfield (left) racing a car on a board track in 1915
Файл:Layout of the Tacoma Speedway.jpg
Qualifying speeds at two-mile Tacoma Speedway were sometimes higher than those at Indianapolis.

The first board track for motor racing was the circular Los Angeles Motordrome, built in 1910 in the area that would later become the city's Playa del Rey district.[1] Based on the same technology as European velodromes used for bicycle racing, this track and others like it were constructed with Шаблон:Convert x Шаблон:Convert boards, often with turns banked at up to 45 degrees. In some cases, such as the track at Culver City, banking was 50 degrees or more.[2] Longer tracks were later built – some up to Шаблон:Convert long by 1915 - and lap speeds exceeding 100 miles per hour became commonplace.[3][4][5]

Interest in motorsport was exploding during this period and by 1929, at least 24 board tracks had been built around the country, although by 1931, 20 of the 24 had been shut down or abandoned, and from 1932 on there were no more championship-level races run on boards.[6][7] The tracks were relatively inexpensive to construct compared to more permanent facilities – the total facility cost of the Шаблон:Convert Tacoma Speedway was just $100,000 in 1915, compared to the $700,000 spent in 1909 just to pave the Шаблон:Convert Indianapolis Motor Speedway.[8][9]

Name Location Track length Years active
Los Angeles Motordrome Playa del Rey, California Шаблон:Convert 1910–1913
Oakland Motordrome Elmhurst, California Шаблон:Convert 1911–1912
Speedway Park Chicago, Illinois Шаблон:Convert 1915–1918
Des Moines Speedway Valley Junction, Iowa Шаблон:Convert 1915–1917
Omaha Speedway Omaha, Nebraska Шаблон:Convert 1915–1917
Sheepshead Bay Speedway Brooklyn, New York Шаблон:Convert 1915–1919
Tacoma Speedway Tacoma, Washington Шаблон:Convert 1915–1922
Uniontown Speedway Hopwood, Pennsylvania Шаблон:Convert 1916–1922
Cincinnati Motor Speedway Sharonville, Ohio Шаблон:Convert 1916–1919
Beverly Hills Speedway Beverly Hills, California Шаблон:Convert 1920–1924
Fresno Speedway Fresno, California Шаблон:Convert 1920–1927
San Francisco Speedway San Carlos, California Шаблон:Convert 1921–1922
Cotati Speedway Santa Rosa, California Шаблон:Convert 1921–1922
Kansas City Speedway Kansas City, Missouri Шаблон:Convert 1922–1924
Altoona Speedway Tipton, Pennsylvania Шаблон:Convert 1923–1931
Charlotte Speedway Pineville, North Carolina Шаблон:Convert 1924–1927
Culver City Speedway Culver City, California Шаблон:Convert 1924–1927
Rockingham Park Salem, New Hampshire Шаблон:Convert 1925–1928
Baltimore-Washington Speedway Laurel, Maryland Шаблон:Convert 1925–1926
Fulford–Miami Speedway Fulford, Florida Шаблон:Convert 1926–1927
Atlantic City Speedway Hammonton, New Jersey Шаблон:Convert 1926–1928
Akron-Cleveland Speedway Northampton Township, Ohio Шаблон:Convert 1926–1930[10]
Pittsburgh-Bridgeville Speedway Bridgeville, Pennsylvania Шаблон:Convert 1927–1930[10]
Woodbridge Speedway Woodbridge, New Jersey Шаблон:Convert 1929–1931
[7]

Racing on these tracks often drew large crowds of paying spectators. In 1915, a crowd of 80,000 was reported in Chicago, three weeks after only 60,000 had attended the Indianapolis 500.[6] Relatively small and isolated Tacoma (population 83,000 in 1910) had turned out 35,000 to see a race the year before.[11][12] To attract both competitors and fans, race promoters offered what were then considered sensational amounts of prize money - a total purse of $25,000 was not unusual around the time of World War I.[13][14]

After World War I, the Automobile Association of America's Contest Board resumed and re-organized the National Championship system.[15] From the beginning of the 1920 season to the end of 1931, the AAA sanctioned a total of 123 championship racing events on 24 different race tracks, and 82 of those races were run on wooden surfaces. (Of the remainder, 12 were on the bricks of Indianapolis, and the other 29 were on dirt tracks or road courses.)[16]

Safety

Файл:1914 Board Track Car Passenger Side.jpg
Car raced at several board tracks

The first track in Playa del Rey was banked at a 3:1 pitch (about 20 degrees), but later tracks were built with higher banking and some motorcycle tracks were banked up to 60 degrees.[17][18] Even though the physics of such track designs were intuitively obvious, it was not until construction of the Beverly Hills track in 1919 that builders began to incorporate engineering knowledge that had been known to railroads for decades. At Beverly Hills, designer Art Pillsbury, who eventually worked on more than half of the championship-caliber board tracks nationwide, first employed the Searle Spiral Easement Curve, and the effect on car handling was pronounced.[19][20] According to Pillsbury, a correctly engineered track could be driven without steering input from the driver – the car would steer itself, simply due to the track geometry.[19]

The effects of these changes were higher cornering speeds and higher G-forces on drivers, but not necessarily greater safety. Driver fatalities continued to mount on board tracks into the 1920s, and included four Indianapolis 500 winners, three of which occurred at the Altoona track (another Pillsbury design) in Tipton, Pennsylvania, and three in the same years in which the driver won at Indianapolis. Winner of the 1919 Indianapolis 500 Howdy Wilcox died in an Altoona race on September 4, 1923, while co-1924 winner Joe Boyer and 1929 winner Ray Keech both suffered fatal accidents at the facility in the same years as their Indianapolis 500 wins – Keech's occurring only seventeen days after, on June 15, 1929. Gaston Chevrolet, winner of the 1920 Indianapolis 500, perished that same autumn, on November 25, 1920, in a Thanksgiving Day race at Beverly Hills.[21]

Even when the cars did not crash, racing on a board track was exceedingly dangerous due to flying wood splinters and debris, and due to the primitive tire technology and head protection of the era.[22][23] In one oral history taken from a driver, he told a tale of wooden shards driven into the faces of drivers and riding mechanics, and sudden catastrophic tire failures caused by track conditions.[24] Cars were fitted with anti-splinter devices to protect their radiators.[25] Other safety devices also hadn't been invented yet (seat belts, roll bars, or fire protection).[26] Drivers often were ejected from their cars and would fall tens of feet (several meters).[26] Drivers and riding mechanics often were driven over by their own or another car.[26] Pete DePaolo wrote in his book Wall Smacker that racing on boards was "a great sensation, tearing around a board speedway dodging holes and flying timber."[26]

On the motorcycling motordromes, the situation was also very dangerous and the danger was aggravated by the riders' lack of proper safety equipment.[27] Fans sat above the top of the track, looking down at the racers. When a rider lost control, he could slip up off the track and into the crowd. Many fatalities occurred, often involving spectators. The velodrome at Nutley, New Jersey, a Шаблон:Convert oval banked at 45 degrees (generating lap times of 8 seconds or less) and built from Шаблон:Convert lumber on edge, was "unquestionably the deadliest".[28] On September 8, 1912, "Texas Cyclone" Eddie Hasha was killed at a motordrome in Newark, New Jersey in an accident which also killed another racer and four spectators, and injured ten more. The deaths made the front page of The New York Times,[29] and the press started calling the short 1/4 and 1/3 mile circuits "murderdromes".[18] The 1913 motorcycle championship races were moved to a dirt track because dirt was safer.[30] The national organization overseeing motorcycle racing banned all competitions on board tracks shorter than Шаблон:Convert in 1919.[31] One by one, the manufacturers withdrew their support due to the negative publicity.[27]

The end of board tracks

A major contributor to the demise of board tracks was the high cost of maintenance. There was no suitable wood preservative available, and depending on climate, tracks needed new boards every five years on average.[20] Resurfacing required as much as a million board feet of new lumber per Шаблон:Convert of track, which would have cost around $125,000 at the prices prevalent at the time.[20] Thus, during the last decade of the board tracks, carpenters would repair the tracks from below, sometimes even during a race, while the cars raced overhead at Шаблон:Convert or faster.[24]

An additional factor was that as speeds increased, overtaking became more difficult - the fastest car would almost always win the race, as long as it held together long enough to finish. This led to spectators turning their attention to the less-predictable racing that was taking place on dirt tracks.[32]

Though board tracks disappeared from the National Championship scene in 1932, a few smaller tracks did continue to operate for some years afterward. For instance, the Coney Island Velodrome hosted midget racing until at least 1939, and Castle Hill Speedway in the Bronx ran midgets into the 1940s.[33][34]

See also

References

Шаблон:Reflist

External links

Шаблон:Commons category