Английская Википедия:Bolton and Leigh Railway

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:Use dmy dates Шаблон:Infobox rail

The Bolton and Leigh Railway (B&LR) was the first public railway in Lancashire. It opened for goods on 1 August 1828, and thus preceded the Liverpool and Manchester Railway (L&MR) by two years. Passengers were carried from 1831. The railway operated independently until 1845 when it became part of the Grand Junction Railway. Шаблон:LNWR Lines to Bolton

Background

Bolton was situated on the Manchester, Bolton and Bury Canal and Leigh straddled a major east–west canal route. To the west ran the Leeds and Liverpool Canal, and this was connected to the centre of Leigh by the Bridgewater Canal running east. The canals provided freight routes to both Liverpool and Manchester.Шаблон:Sfn

The canals of the time were the major freight routes: they were faster and could transport greater loads than the carriers using the turnpike road system.Шаблон:Sfn However, these canal routes were slow; they became congested, and increasingly more expensive as demand from the rapidly expanding businesses in the area increased.Шаблон:SfnШаблон:Sfn The waterways had a virtual monopoly on the transport links which enabled them to charge exorbitant tolls.Шаблон:Sfn

As costs rose, it was no wonder that business leaders and industrialists began to look for another means of transporting their goods and products.Шаблон:Sfn They looked to the railway to break the canals' monopoly. The canal companies recognised this threat to their business early on: for example, the Leeds and Liverpool canal company minutes of 21 September 1822 mention the issue, and the canal businesses started to take steps to protect their interests.Шаблон:Sfn

Rail roads, tramroads and railways had been around for some time, mainly used to transport goods, especially coal to the canal network. There was already at least one private railway operating in the area: in 1812 Robert Daglish had constructed a railway to carry coal from Orrell Colliery in Winstanley, near Wigan to the Leeds and Liverpool Canal. This railway used "Blenkinsop and Murrays" patent cog and rack steam locomotives to haul the coal wagons.Шаблон:Sfn A little further north, the Lancaster Canal had been built in two sections, joined in 1797 by a Шаблон:Convert tramroad.Шаблон:Sfn

Inception

Sometime before 1 October 1824 a committee was formed by local businessmen, including William Hulton, Benjamin Hick and Peter Rothwell to promote a railway in the area.Шаблон:Sfn The committee is first recorded on that date as requiring its 63 members to pay money into a bank for the "making of a railway or railways or tram road from Bolton to the Leeds and Liverpool canal..."Шаблон:Sfn

Several routes were proposed and the committee contacted the pioneering railway engineer George Stephenson for his views on the scheme. Stephenson was familiar with the area as he was in the process of surveying the route of the future Liverpool and Manchester Railway (L&MR). Stephenson's response was to commission another engineer, Hugh Steel, to conduct a survey of the viable routes for the railway. Steel had worked with Stephenson as a surveyor on the L&MR, and he was assisted in the survey by Robert Daglish.Шаблон:Sfn The plans for the line reflected contemporary railway engineering practice in the north-east of England, where Stephenson came from, by including inclined planes which would require cable haulage by stationary engines.Шаблон:Sfn Steel's proposed line was approved by Stephenson and accepted by the committee.Шаблон:Sfn

The committee had decided that if they tried to cross the canal at Leigh, with the ultimate aim of making a connection to the proposed L&MR, they would create so much opposition that their Parliamentary Bill could fail.Шаблон:Efn There was little precedent for approving railways; local landowners were reluctant to have railways on or near their property; and the canal companies were very influential. The committee decided to put forward a bill they thought could pass, rather than one with a much higher risk of failing.Шаблон:Sfn

Towards the end of 1824 the Bill was presented to Parliament together with Steel's survey and an estimated construction cost of £43,143 (equivalent to £Шаблон:Inflation in Шаблон:Inflation-yearШаблон:Inflation-fn).Шаблон:Sfn

The Bill had considerable opposition in Parliament, but the Act received its assent on 31 March 1825 after clauses had been inserted refusing permission to cross the canal,Шаблон:Efn effectively making the railway little more than a canal feeder.Шаблон:Sfn The committee could take some satisfaction in its caution as the Liverpool and Manchester Bill was lost that same year.Шаблон:Sfn

This first Act authorised the company to raise the sum of £44,000, by the sale of 440 shares in the company, each valued at £100.Шаблон:Sfn The railway was to be a single track with two rope-worked inclines using stationary steam engines, to run from Lecturers Closes at Bolton to the Leeds and Liverpool canal at Leigh.Шаблон:Sfn

Construction and opening

In 1826 work began on the construction of the railway starting from Bolton levelling the ground for the line up to Chequerbent under the supervision of local engineer, Robert Daglish.Шаблон:SfnШаблон:Sfn

The B&LR found it needed to revise some of the clauses set out in the original Act and they prepared a second Bill in 1828. The second Act received assent on 26 March 1828.Шаблон:Efn This Act enlarged the company's powers, and it authorised the raising of an additional £25,000 to meet the increased costs of construction as well as specifying the track gauge for the railway as being Шаблон:Convert between the inside edges of the rails, as well as Шаблон:Convert between the outside edges.Шаблон:Sfn Sometime after this the line became a standard gauge line at Шаблон:Convert.

The Acts for the B&LR also authorised branch lines at the Bolton end, to the Union Foundry on Deansgate, to William Hulton's coal yard at Great Moor Street and to the Manchester, Bolton and Bury Canal. The branch to the canal was never built and the branches to Great Moor Street and Deansgate opened for freight in 1829.Шаблон:Sfn

The first section of track between Derby Street Bolton and William Hulton's collieries at Pendlebury Fold near Chequerbent in Westhoughton was officially opened on 1 August 1828Шаблон:Sfn

The official opening of the completed part of the railway (which the Manchester Guardian reported as being from CheckerbentШаблон:Sic to the town of Bolton) was witnessed by "an immense concourse of people". They saw a procession of a "new locomotive engine made by Messrs. R. Stephenson and Co. of Newcastle ... to which were attached six waggonsШаблон:Efn filled with people, and decorated with numerous flags and streamers; then followed a very elegant and commodious coach, intended at some future period to convey passengers on the railway. This was filled with ladies amongst whom was Mrs. Hulton. Then followed seven other wagons, decorated with flags, and crowded with passengers, including the musicians of the Bolton old band, who occupied the two last waggons, and played a variety of appropriate airs, during the procession".

The procession started at 12.15 pm with the locomotive drawing the thirteen waggons and the coach from Pendlebury Fold, near Hulton Park, to Top o' th' Pike where the stationary engine was situated. There were about 150 people on the train which travelled at about Шаблон:Convert. On reaching the stationary engine the waggons were detached and "Mrs. Hulton, after a short address, baptised the engine by the name of the Lancashire Witch". She then presented a garland of flowers to the engineer, who treated it, in the newspapers view, rather unceremoniously by placing it on the furnace-pipe (presumably the chimney) where the flowers soon underwent a lamentable change.

The engine was sent back to one of Mr. Hulton's collieries from whence it returned hauling six waggons containing about 2 tons of coal which it drew with great ease at about Шаблон:Convert. The locomotive was again detached from its train and demonstrated some of its abilities, starting and stopping under control even from speeds estimated up to Шаблон:Convert. After the demonstration the coach and waggons were attached to the rope of the stationary engine and proceeded down the inclined plane towards Bolton. The waggons were "occasionally moved with great celerity, and occasionally stopped by means of brakes applied to the wheels, in order to shew the command possessed over them by the engineer, in case of any accident or obstruction". The crowd was so large that several people were thrown onto the railway where they were "placed in the most imminent peril" and one man was reported as nearly falling under the wheels of a waggon before it could be stopped, he was reportedly severely hurt.

At the bottom of the incline it was intended that the waggons should be horse-drawn to the terminus but the crowd man-handled the waggons to their destination. Upon arrival, a considerable number of gentlemen sat down to an excellent dinner at the Commercial Inn, Mr. Hulton in the chair.[1]

The coach used by the ladies during the opening was loaned by the L&MR and another carriage was borrowed from them in December 1829 for 'an experiment in passenger carrying' but passengers weren't regularly carried until 1831.Шаблон:Sfn

The line was completed through to the Leeds and Liverpool Canal at Leigh by end of March 1830. By then the construction of the Kenyon and Leigh Junction Railway which provided a connection with the Liverpool and Manchester Railway was already well advanced.Шаблон:Sfn

Description of the route

The line was just under Шаблон:Convert in length, and was originally single track with the exception of about Шаблон:Convert towards the north end of the line, there were occasional sidings or passing places.Шаблон:Sfn

Whishaw (1842) gives a description of the line, starting from Bolton Great Moor Street the train is worked by horse-power to the bottom of the Daubhill incline. Here a Шаблон:Convert stationary steam engine hauled the train up out of Bolton. Trains running down the incline are worked by gravity.Шаблон:Sfn The incline rises Шаблон:Convert in Шаблон:Cvt.Шаблон:Sfn

At the top of this incline the locomotive is attached and the train works to Leigh.Шаблон:Efn In the other direction a Шаблон:Convert stationary steam engine hauls trains (including their locomotives) up from Bag Lane through Chequerbent towards Bolton.Шаблон:Sfn This incline rises Шаблон:Convert but over a greater distance so the slope is less severe overall.Шаблон:Sfn

The rope for the Chequerbent incline is made by Webster of Sunderland and is Шаблон:Convert in circumference, it weighs about Шаблон:Convert when new and costs £2 10s per hundredweight. This rope when partially worn is transferred to the Daubhill incline.Шаблон:Sfn

The width occupied by the railway on a level surface is Шаблон:Convert and the track is ballasted with small coal.Шаблон:Sfn

The OS map of 1849 shows the original B&LR line running to the canal as well as the newer K&LJR line running over the bridge.[2]

Double track was laid in sections with the section from Pennington to Atherton Junctions opening on 31 May 1880, the section through Bag Lane on 4 July 1880 and the final section through to Bolton on 1 February 1885, south of Pennington on the former K&LJR had been doubled when the Tyldesley Loopline opened in 1864.Шаблон:Sfn

Stations

Шаблон:Bolton and Leigh Railway RDT The original passenger stations on the line all opened on 11 June 1831 when the line opened for passenger traffic, although "station" meant somewhere people could get on or off the train, the facilities would have been primitive by later standards. At Bolton, for example, the booking office was described as little more than a shed.Шаблон:Sfn

The original stations were:

  • Bolton, which was renamed Bolton Great Moor Street in October 1849. This station was rebuilt in 1871 after it was virtually demolished when a runaway goods train collided with empty carriages in the station in January 1858. The station was patched up and continued to handle traffic until a larger station opened nearby in 1874.Шаблон:EfnШаблон:Sfn
  • Daubhill, which closed on 2 February 1885 when it was replaced by a new station with the same name when the line was realigned.Шаблон:Sfn
  • Chequerbent, which closed on 2 February 1885 when it was replaced by a new station with the same name when the line was realigned.Шаблон:Sfn
  • Bag Lane, which was renamed Atherton in 1847 and Atherton Bag Lane on 2 June 1924.Шаблон:Sfn
  • Leigh, which was renamed Westleigh on 1 August 1876.Шаблон:Sfn

New stations opened in 1885 at Daubhill and Chequerbent when the line was realigned to remove the inclines and increase capacity, the track doubling took place during the same period.Шаблон:Sfn

The new Daubhill station opened on opened on 2 February 1885 on the new alignment of the railway, it was renamed Rumworth & Daubhill on 28 April 1885.Шаблон:Sfn

The new Chequerbent railway station, sometimes known as Chequerbent for Hulton Park, opened on opened on 2 February 1885 on the new alignment of the railway.Шаблон:Sfn

The last station to open was Atherleigh which the London, Midland and Scottish Railway opened on 14 October 1935 as there had been new housing development in the area.Шаблон:Sfn

Operations

The Bolton and Leigh Railway (B&LR) was the first public railway in Lancashire, being a public railway meant carrying goods either by company wagon or privately owned wagon.Шаблон:Sfn The B&LR chose to follow the turnpike and canal tradition where the service was available to anyone who could pay the toll.Шаблон:Sfn

Shortly after the line had opened its 'utility' was being reported on favourably, coal was reduced in price in the Bolton area by more than 2s per ton.[3] Business on the line improved when the Kenyon and Leigh Junction Railway (K&LJR) was constructed to link the B&LR from its southern terminus with the Liverpool and Manchester Railway (L&MR) at Kenyon.

When the K&LJR presented its bill to Parliament in 1828, MPs were more amenable towards railway companies and the canal company withdrew its opposition to the railway crossing the canal.Шаблон:Sfn In 1829 the K&LJR received its royal assent to build a single-track line from the end of the Bolton and Leigh Railway near Twiss (now Twist) Lane in Westleigh to Kenyon, where a junction would be made with the L&MR which was at an advanced stage of construction.Шаблон:EfnШаблон:Sfn

The Шаблон:Convert line crossed the Leeds and Liverpool Canal before heading south towards Kenyon. Stations were built at Bradshaw Leach and Kenyon. As soon as it opened on 3 January 1831, goods trains could access Шаблон:Convert of line between Bolton and Liverpool and a few months later a passenger service to Liverpool started.

Walker (1832) reports that from 1 June 1832 passenger service levels for all days except Sunday were:

  • Depart Liverpool at 7.30 am to Bolton
  • Depart Liverpool at 11 am to Bolton
  • Depart Liverpool at 2.30 pm to Bolton
  • Depart Liverpool at 5.15 pm to Bolton

On Sundays there was only one departure at 5.30 pm.

Journeys in the opposite direction were not described by Walker but he does report the fare as being "Inside, 5s; Outside, 3s 6d".Шаблон:EfnШаблон:Sfn

By 1834 the B&LR had leased the running of the railway to John Hargreaves, an established carrier of Bolton. Hargreaves was granted running rights over the K&LJR and the L&MR so that he ran the services between Bolton and Liverpool.Шаблон:Sfn Hargreaves also worked goods services to Manchester.Шаблон:Sfn He was required to provide his own locomotive power, carriages, and wagons, except a few for ballasting which belong to the company.Шаблон:SfnШаблон:SfnШаблон:Sfn Hargreaves was an established carrier on roads and canals before the railway was built and the main carrier from north west England into Scotland, the equal of Pickfords who controlled the trade to the south of Manchester.Шаблон:SfnШаблон:Sfn Hargreaves became a pioneer of excursions by rail, running Sunday trips from Bolton to Liverpool as early as 1841. In 1843 he ran excursions to London and two years later to Manchester.Шаблон:Sfn The Grand Junction Railway (GJR) terminated the Hargreaves leases on 31 December 1845.Шаблон:Sfn

The stationary engines played a prominent role on the line for at least 15 years, an interesting example, amongst the few, of the transitional years embodying both techniques of haulage.Шаблон:Sfn It is believed the stationary engines remained in operation until about 1846.Шаблон:Sfn Cable haulage was discontinued once locomotive performance had improved sufficiently.Шаблон:Sfn

The railway obtained two subsequent Acts, the third Act in 1831 to amend and enlarge the existing acts and authorising an additional £16,500 of joint stock capital and the powers to raise an additional £25,000 in loans.Шаблон:EfnШаблон:Sfn

The fourth Act, which received royal assent in 1836 was an Act to amend and enlarge the several Acts already in force and it gave the Company power to borrow an additional £60,000.Шаблон:EfnШаблон:Sfn One of the other purposes was the right to lease the K&LJR for up to 25 years, as well as for the purchase of the line for the sum of £44,750.Шаблон:Sfn

In 1838 there were 86,320 passengers conveyed on the line, an average of 236.5 per day generating an annual income of Шаблон:Nowrap.Шаблон:EfnШаблон:Sfn

Locomotives and rolling stock

Файл:Lancashire Witch.jpg
Lancashire Witch
Файл:Sans Pareil.jpg
Sans Pareil

Shortly after the passing of the second Act the railway took delivery of their first steam locomotive, which had been ordered from Robert Stephenson and Company by the Liverpool and Manchester Railway in January 1828. The L&MR subsequently decided their order was premature and the locomotive was transferred to the B&LR by mutual agreement.Шаблон:Sfn This was the locomotive named Lancashire Witch at the opening of the line.

The Lancashire Witch had some innovative features, it was built with 45° inclined cylinders that allowed the axles to be sprung resulting in improved stability. The locomotive was also equipped an expansion valve that allowed the control of the flow of steam that entered the cylinders, which made it the first locomotive to feature expansive working.Шаблон:Sfn

By 1831, the railway owned at least three other locomotives. Union, which was built in 1830 by Rothwell, Hick and Rothwell, along with Salamander and Veteran, which were both built by Crook and Dean.Шаблон:Sfn

In 1832 the railway hired Timothy Hackworth's Sans Pareil at a rate of £15 per month, and then bought it outright for £110.Шаблон:EfnШаблон:Sfn

In 1842 there were 14 locomotives in operation on the line:Шаблон:Sfn

Sans Pareil was used on the railway until 1844, when it was sold to the Coppull Colliery, Chorley and used as a stationary engine up until 1863, when it was presented to the Patent Office Museum (now the Science Museum).Шаблон:Sfn

The early passenger accommodation on the trains comprised:

  • two coaches, named Elephant and Castle, which provided the inside accommodation,
  • external accommodation with wooden seats in open wagons.Шаблон:Sfn

In 1842 there were five first-class carriages each holding 24 passengers in three compartments. Each carriage was Шаблон:Cvt long with an inside width of Шаблон:Cvt. They had spring buffers, were painted green with the company arms on the panels, and had interiors lined with blue cloth. Each carriage weighed about 3 tons and were built by Mr Cooper of Bradshawgate, Bolton, each costing £400. A sixth carriage was slightly different holding twenty passengers, sixteen in two regular compartments and four in a coupe.Шаблон:Sfn

There were also eight second-class carriages each holding 24 passengers in three compartments, being enclosed at the ends but open at the sides.Шаблон:Sfn

In 1842 there were about 300 wagons in use on the line, all belonging to John Hargreaves. About 40 of these had iron bottoms.Шаблон:Sfn

Later years

In 1844 the Liverpool and Manchester Railway had been negotiating with the Bolton and Leigh Railway and the Kenyon and Leigh Junction Railway with a view to an amalgamation, these negotiations were made more complicated by the initial inclusion of the North Union Railway in the proposed merger and then even more complicated when the Grand Junction Railway became interested, all the lines were connected and provided through running for each other's trains. Negotiations were reaching their conclusions when the NUR shareholders rejected their part in the amalgamation. At this juncture the K&LJR simplified the arrangements by agreeing to be purchased outright by the B&LR (under the provisions of the 1836 Act) so the amalgamation took place on 8 August 1845 without the NUR and the B&LR became part of an enlarged Grand Junction Railway.Шаблон:EfnШаблон:SfnШаблон:Sfn

The GJR became part of the London and North Western Railway (L&NWR) on 16 July 1846 when it was formed by the amalgamation of the GJR, the Manchester and Birmingham Railway, the London and Birmingham Railway and the Trent Valley Railway.Шаблон:Sfn

Timetables are available for several of the years the line was open:

  • The service level on the line in 1850 when the line was under early L&NWR ownership was 7 trains per day departing in each direction between Bolton Great Moor Street and Kenyon Junction from where there were connections to and from Liverpool, Warrington, Birmingham and London. There were only two services on Sundays. The fare between Bolton and Liverpool was now 5s in first class, 3s 9d in second class and 2s 4d in third.Шаблон:EfnШаблон:Sfn
  • In 1922, just prior to the grouping of railways, the L&NWR timetable for the line showed 11 services in each direction with some additional part-line services and altered services on Saturdays and no through service on Sundays.Шаблон:Sfn
  • In 1947, at the end of the London Midland and Scottish Railway days there were 8 services in each direction, with an extra one on Saturdays. There were no Sunday services.[4]

Closure

The stations at Chequerbent and Daubhill closed to passengers on 3 March 1952.Шаблон:Sfn

All other stations and the line closed to passengers on 29 March 1954 but temporarily reopened in five successive years to cope with Bolton Wakes Week traffic.Шаблон:Sfn

The line closed in sections, Atherton Junction to Pennington South Junction closed to freight on 7 October 1963, and with it Atherton goods station.Шаблон:Sfn

Chequerbent goods yard closed on 27 February 1965.Шаблон:Sfn

With the demise of goods traffic, Crook Street Yard in Bolton closed in April 1965 and private sidings were closed by October 1967.Шаблон:Sfn The only coal traffic using the line in the 1960s was from Jackson's sidings in Tyldesley.Шаблон:Sfn Passenger traffic from the Tyldesley Loopline closed following the Beeching cuts on 5 May 1969 when all the stations on that line were closed.Шаблон:SfnШаблон:Sfn

See also

References

Notes

Шаблон:Notelist

Citations

Шаблон:Reflist

Bibliography

Шаблон:Refbegin

Шаблон:Refend

Further reading

Шаблон:Refbegin

Шаблон:Refend

External links

Шаблон:Refbegin

Шаблон:Refend

Шаблон:Use British English

Партнерские ресурсы
Криптовалюты
Магазины
Хостинг
Разное

  1. ↑ Шаблон:Cite news
  2. ↑ Шаблон:Cite web
  3. ↑ Шаблон:Cite news
  4. ↑ Шаблон:Cite web
Источник — http://wikihandbk.com/ruwiki/index.php?title=Английская_Википедия:Bolton_and_Leigh_Railway&oldid=13582199