Английская Википедия:Boron nitride aerogel

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Файл:BN aerogel on hair.jpg
BN aerogel with a mass density of 0.6 mg/cm3 resting on human hair.[1]
Файл:BN aerogel SEM-TEM.jpg
Electron micrographs showing the internal structure of BN aerogel consisting of BN nanotubes and nanosheets.[1]
Файл:Oil absorption by BN aerogel.jpg
Top: absorption of cyclohexane by BN aerogel within 5 seconds. Cyclohexane is stained with Sudan II red dye and is floating on water. Bottom: reuse of the aerogel after burning in air.[1]

Boron nitride aerogel is an aerogel made of highly porous boron nitride (BN). It typically consists of a mixture of deformed boron nitride nanotubes and nanosheets. It can have a density as low as 0.6 mg/cm3 and a specific surface area as high as 1050 m2/g, and therefore has potential applications as an absorbent, catalyst support and gas storage medium. BN aerogels are highly hydrophobic and can absorb up to 160 times their mass in oil. They are resistant to oxidation in air at temperatures up to 1200 °C, and hence can be reused after the absorbed oil is burned out by flame. BN aerogels can be prepared by template-assisted chemical vapor deposition at a temperature ~900 °C using borazine as the feed gas.[1] Alternatively it can be produced by ball milling h-BN powder, ultrasonically dispersing it in water, and freeze-drying the dispersion.[2]

References

Шаблон:Commons category Шаблон:Reflist

  1. 1,0 1,1 1,2 1,3 Ошибка цитирования Неверный тег <ref>; для сносок nat не указан текст
  2. Ошибка цитирования Неверный тег <ref>; для сносок nat2 не указан текст