Английская Википедия:British Rail DP1

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:EngvarB Шаблон:Use dmy dates Шаблон:Infobox locomotive

English Electric DP1, commonly known as Deltic, is a prototype Шаблон:Convert demonstrator locomotive employing two Napier Deltic engines, built by English Electric in 1955.

The high power of the locomotive at an acceptably low axleload resulted in 22 similar locomotives being ordered by British Railways for use on East Coast Main Line express passenger services, the serial production of which became the British Rail Class 55.

Background and design

Файл:English Electric Deltic prototype (14451116103).jpg
Frontage

The English Electric company, which had absorbed the aeroengine-maker D. Napier & Son into its group at the instruction of the Ministry of Aircraft Production in 1942Шаблон:Cn, was a major builder of diesel and electric locomotives. The two George Nelsons (Sir George, and his son, known in the works as "Half") saw the potential of Napier's Deltic engine for rail traction and in 1954–1955 built a demonstrator at its Dick, Kerr works in Preston. Officially numbered DP1,Шаблон:Efn its internal project title was Enterprise, and it was intended that the locomotive would carry that name.Шаблон:Sfn However, in 1954, before completion, Hudswell Clarke announced a range of small diesel-mechanical locomotives using the same name.Шаблон:SfnШаблон:Efn After initial trials in 1955, the locomotive received the word Deltic in large cream capital letters on its sides, and the name became synonymous with the locomotive.Шаблон:Sfn

Long aluminium beadings on the sides were painted cream, a visual device to make the locomotive's high sides appear more slender and add to the impression of speed. Three curved chevrons on each nose, in the same cream, added to that effect. To British eyes, the locomotive's bulldog nose styling was reminiscent of American locomotives, such as the EMD E-unit or ALCO PA designsШаблон:Cn (partly because English Electric initially planned to offer the type for export), with high noses and small, somewhat swept-back cab windows set behind them. To add to the American look of the locomotive, a large headlight was to have been fitted to each nose (the lights were never installed but would have been of the rotating 'Mars Light' type as fitted to North American locomotives of the era). Two 18-cylinder Deltic engines were fitted, derated from the 1,750 horsepower (1.3 MW) of the marine engines used in minesweepers to 1,650 horsepower (1.2 MW) each, generating 3,300 horsepower (2.5 MW) total. This derating reduced the stress on the engines, thereby increasing the service life and length of time between overhauls.Шаблон:Citation needed

Service and testing

Файл:English Electric 'Deltic' prototype Co-Co Diesel-Electric on clearance trials at Newcastle Central, 1959, geograph 4988049 by Walter Dendy, deceased.jpg
DP1 on test at Newcastle Central in 1959

The locomotive first saw service on the London Midland Region of British Railways in 1955, generally operating fast London to Liverpool freight trains; it was withdrawn and after modifications re-entered services in 1956.[1] Tests were carried out on the Settle to Carlisle line in August/September 1956,Шаблон:SfnШаблон:SfnШаблон:Efn after which it operated passenger trains, The Shamrock and The Merseyside Express, between London and Liverpool,Шаблон:Sfn[1] followed by London-Carlisle trains, and in 1957, returning to London-Liverpool trains.Шаблон:Sfn The region's chief mechanical and electrical engineer, J.F. Harrison, rejected the design, believing high-speed engines (i.e. 1500 rpm) unsuitable for railway applications.[1]Шаблон:Efn

In 1957, Gerry Fiennes, the line traffic manager on the former Great Northern route out of London King's Cross station, was seeking high power locomotives to run services on the East Coast Main Line, having found the 2000 hp English Electric type 4 locomotives produced under the 1955 modernisation plan lacking sufficient power for his planned timings; as a consequence he proposed using 'Deltic' type locomotives on the line. Objections to the order included those arising from: a limited permitted top speed due to the mass of the locomotive; the potential for the order to delay a proposed (1957) electrification scheme of the line; as well as the size which required modifications to the King's Cross platforms. An order was placed in 1959 for 22 Class 55s to replace 55 steam locomotives.[1]

Preservation

Файл:Preston Riverside - Deltic.JPG
DP1 at the Ribble Steam Railway in 2015
Файл:Inside Deltic prototype (driver's position).JPG
Driving position of DP1

DP1 was in service until 24 November 1960 when a severe oil leak in one of the engines was discovered. The locomotive was sent to English Electric Company's Works at Newton-le-Willows, Lancashire the next day for repair.[2] However no repairs were sanctioned and the locomotive was withdrawn from service in March 1961 having completed Шаблон:Convert.[2] Plans to test it in Canada fell through,Шаблон:Sfn and the locomotive was donated in April 1963 to the Science Museum, South Kensington and placed on public display.[3]

After 30 years at the Science Museum, it was transferred to the National Railway Museum, York in October 1993.[4] About 11 years later it was moved north to the National Railway Museum Shildon, County Durham in July 2004.[2] In August 2012 it was loaned to The Ribble Steam Railway in Preston, Lancashire,[5] which is barely a mile away from where it was originally built, returning to Shildon in October 2015 [6] where it remains as of January 2023.[7]

Restoring the two Deltic engines installed in DP1 to running condition is not feasible. The engines (Type E158, D18-12) although similar, differ from those used in British Rail Class 55 locomotives (Type E169, D18-25B).[8] Aside from the original issue with the severe oil leak in the phasing gear cover, significant engine components were removed for use as spare parts for the Royal Navy prior to DP1 being donated to the Science Museum[9] as the locomotive was not owned by British Railways.[10]

Models

The Kitmaster company produced an unpowered polystyrene injection moulded model kit for 00 gauge. In late 1962, the Kitmaster brand was sold by its parent company (Rosebud Dolls) to Airfix, who did not release model kits of this locomotive. In time, the Airfix tools passed on to Dapol who rediscovered the moulding tools and have since produced the model kit.[11]

In 2007 model manufacturer Bachmann Branchline and the National Railway Museum announced the release of an OO scale model of the DP1 for sale at the NRM Shop. Bachmann used laser-scanning (see 3D scanner) of the machine at the National Railway Museum Shildon to collect dimensional data of the locomotive. The model was praised for its attention to fine detail and smooth and powerful running.[12] Bachmann released an N-scale model under the Graham Farish brand in 2010.[13][14]

In February 2023 Hornby announced a new diecast Dublo tooling in OO gauge of the Deltic prototype locomotive, English Electric DP1 'Deltic', fitted with sound (R30297TXS).[15]

See also

  • British Rail DP2, a later prototype, with a single English Electric 16CSVT engine of 2,700 hp

Notes

Шаблон:Notelist

References

Шаблон:Reflist

Sources

Further reading

External links

Шаблон:Commons category

Шаблон:British Rail Locomotives

Партнерские ресурсы
Криптовалюты
Магазины
Хостинг
Разное

  1. ↑ 1,0 1,1 1,2 1,3 Шаблон:Cite book
  2. ↑ 2,0 2,1 2,2 Шаблон:Cite web
  3. ↑ Шаблон:Cite magazine
  4. ↑ Шаблон:Cite magazine
  5. ↑ Шаблон:Cite web
  6. ↑ Шаблон:Cite web
  7. ↑ Шаблон:Cite web
  8. ↑ Шаблон:Cite web
  9. ↑ Шаблон:Cite web
  10. ↑ Шаблон:Cite book
  11. ↑ Шаблон:Cite book
  12. ↑ Шаблон:Cite web
  13. ↑ Шаблон:Cite magazine
  14. ↑ Шаблон:Cite magazine
  15. ↑ Шаблон:Cite web
Источник — http://wikihandbk.com/ruwiki/index.php?title=Английская_Википедия:British_Rail_DP1&oldid=13644223