Английская Википедия:Cadillac High Technology engine
Шаблон:Infobox automobile engine
The Cadillac High Technology Engine was a V8 engine produced by the Cadillac division of General Motors from 1982 to 1995.
While the High Technology engine was being developed, due to higher Corporate Average Fuel Economy standards being phased in by the United States government, Cadillac introduced a variant of their traditional V8 engine with the first usage of cylinder deactivation for 1981 as a stopgap measure to increase the fuel economy of their lineup.
However, the V8-6-4 engine experienced problems in reliability related to cylinder deactivation. GM released EPROM updates hoping to increase drivability and reliability, but could not overcome the primitive state of engine control technologies at the time, and the V8-6-4 was discontinued for 1982, with many owners disconnecting the cylinder deactivation system.[1] Cadillac, who planned to introduce their new engine in a line of front-wheel drive models for 1983, was then forced to rush development and production of the High Technology engine for a 1982 introduction in their current rear-wheel drive models.[2]
For nearly 25 years, the High Technology V8 line was known as the last engine family exclusive to the Cadillac Motor Car Division because its successor, the Northstar, would go on to share its architecture with the Oldsmobile Aurora in 1994 and later with flagship Pontiac and Buick models, such as the Pontiac Bonneville and Buick Lucerne. However, in 2019, the Cadillac Blackwing V8 became the new holder of that title.
HT-4100
A new lighter V8 engine was rushed into production for 1982, the HT-4100 (option code LT8). It was a 4100 cc V8, designed for rear-wheel drive and longitudinal front-wheel drive applications sharing the same "Metric" transmission bellhousing pattern as Buick, Oldsmobile, and Pontiac rear- and front-wheel drivetrains for 2.5 L 4-cylinder and 2.8, 3.1, and 3.3 L V6. A new line of downsized Cadillacs with the transverse mounted V8 engine and front wheel-drive was slated for launch in 1983, however, delays in the downsizing program shared with Buick and Oldsmobile postponed their debut until mid 1984 when they were introduced as early 1985 models.
Design Features
HT stood for High Technology. For its time, the engine and its electronic control module (ECM) were quite sophisticated, despite having a throttle-body fuel injection system (as opposed to more advanced multiport fuel injection). Like the 6.0/368" DFI engines before it, the HT4100 used an ECM that incorporated a detailed on-board computer. Every parameter of engine performance could be displayed on the Electronic Climate Control panel while the car was being driven. The HT4100 also adopted other modern design features including replaceable cylinder sleeves, high operating temperature for emission control (210 degrees, compared to 180 in earlier engines), free circulation of coolant between the block and the heads, and bimetal construction that mounted heat-tolerant cast-iron heads onto a weight-saving aluminum block. The engine had a bore and stroke of Шаблон:Convert, for a total displacement of Шаблон:Convert. It produced Шаблон:Convert at 4400 rpm and Шаблон:Convert of torque at 2000 rpm.
In 1982, the HT4100 debuted as the standard engine for all Cadillac models except the new compact Cimarron, and the Fleetwood limousines, which continued to carry the variable displacement V8-6-4 engine until 1984.
The HT4100 was prone to failure of the intake manifold gasket due to scrubbing of the bi-metal interface, aluminum oil pump failure, cam bearing displacement, weak aluminum block castings and bolts pulling the aluminum threads from the block. It may not have been the most successful engine to sit under the hood of a Cadillac, but potential buyers were no more satisfied with the other two engines available at the time, the V8-6-4 and the Oldsmobile 5.7 L Diesel. Reliability issues soiled the reputation of the HT4100. As a result, the Oldsmobile V8 gas engines were a popular and straightforward conversion. Despite problems with the engines, Cadillac still had annual sales in the United States above 300,000 as late as 1986.[3]
In 1987, a unique, more powerful engine was introduced in the Cadillac Allanté based on the same architecture. The Allanté 4.1 had a new, reinforced engine block that would later be used in the Cadillac 4.5, it used a different camshaft profile and roller lifters to provide for improved airflow, in addition to multiport fuel injection. This engine was rated at Шаблон:Convert at 4300 rpm and Шаблон:Convert of torque at 3200 rpm. Other than the basic architecture, the only thing the Allanté 4.1 shared with the HT4100 was the displacement, something easily changed in the engine family by simply using different diameter cast-iron cylinder liners.
The 4.1 standard HT 4100 was superseded by improved larger-displacement engines such as the 4.5 and 4.9, and the HT4100 ceased production after the 1988 model year.
Applications
- 1982-1985 Cadillac Fleetwood Brougham
- 1982-1987 Cadillac DeVille
- 1982-1987 Cadillac Eldorado
- 1982-1987 Cadillac Seville
- 1985-1987 Cadillac Fleetwood
- 1987-1988 Cadillac Allante has the same 4.1 liter displacement, but the block was unique and significantly reinforced, with many significant differences, making it a different engine, more closely related to the 1988 4.5 liter Cadillac engine
4.5
The Cadillac 4.5 Litre engine introduced for the 1988 model year was an improved and enlarged version of the HT4100. However, the 4.5 L engine was never classified as HT4500. Engineering advances allowed the company to begin increasing displacement and output again. A bored-out (to Шаблон:Convert) Шаблон:Convert 4.5 version was rated Шаблон:Convert and featured throttle body fuel injection. There were various versions of this engine built from its introduction in 1988 to the end of production in 1992 including a high-output LW2 version with multi-port fuel injection which produced Шаблон:Convert and Шаблон:Convert for the Allanté. Outside of the Allanté, Cadillac introduced a port fuel-injected 4.5 L V8 engine in 1990 with Шаблон:Convert and Шаблон:Convert across their model line up.
Applications
This engine was used in the following vehicles:
- 1988-1990 Cadillac DeVille
- 1988-1990 Cadillac Eldorado
- 1988-1990 Cadillac Fleetwood
- 1988-1990 Cadillac Seville
- 1989-1992 Cadillac Allanté
Шаблон:Anchor L26 4.9
A larger version of the 4.5, the L26 4.9, debuted in 1991 at 4.9 L with a square Шаблон:Convert bore and stroke. Despite the fact that it had similar output to the Allanté's 4.5 L port fuel-injected V8, the 4.9 L engine represented a significant upgrade for the remainder of the Cadillac lineup. Horsepower output was up Шаблон:Convert from the previous 1990 4.5 L engine and torque was up by Шаблон:Convert, to Шаблон:Convert and Шаблон:Convert respectively. Both the 4.9 and 4.5 port fuel-injected engines required premium fuel due to a 9.5:1 compression ratio. The 4.9 produces its maximum horsepower at 4100 rpm.
The 4.9 L was used throughout the Cadillac line and was last available in the 1995 DeVille. The 4.9 was replaced by the new 4.6-liter Cadillac Northstar engine.
Applications
The 4.9 L engine was used in the following Cadillacs:
- 1991-1992 Cadillac Fleetwood
- 1991-1993 Cadillac Eldorado
- 1991-1993 Cadillac Seville
- 1991-1995 Cadillac DeVille (base trim only in 1994 and 1995)
- 1991-1993 Cadillac Sixty Special
References
