Английская Википедия:Cerium

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Distinguish Шаблон:Use American English Шаблон:Infobox cerium Cerium is a chemical element; it has symbol Ce and atomic number 58. Cerium is a soft, ductile, and silvery-white metal that tarnishes when exposed to air. Cerium is the second element in the lanthanide series, and while it often shows the oxidation state of +3 characteristic of the series, it also has a stable +4 state that does not oxidize water. It is also considered one of the rare-earth elements. Cerium has no known biological role in humans but is not particularly toxic, except with intense or continued exposure.

Despite always occurring in combination with the other rare-earth elements in minerals such as those of the monazite and bastnäsite groups, cerium is easy to extract from its ores, as it can be distinguished among the lanthanides by its unique ability to be oxidized to the +4 state in aqueous solution. It is the most common of the lanthanides, followed by neodymium, lanthanum, and praseodymium. It is the 25th-most abundant element, making up 66 ppm of the Earth's crust, half as much as chlorine and five times as much as lead.

Cerium was the first of the lanthanides to be discovered, in Bastnäs, Sweden. It was discovered by Jöns Jakob Berzelius and Wilhelm Hisinger in 1803, and independently by Martin Heinrich Klaproth in Germany in the same year. In 1839 Carl Gustaf Mosander became the first to isolate the metal. Today, cerium and its compounds have a variety of uses: for example, cerium(IV) oxide is used to polish glass and is an important part of catalytic converters. Cerium metal is used in ferrocerium lighters for its pyrophoric properties. Cerium-doped YAG phosphor is used in conjunction with blue light-emitting diodes to produce white light in most commercial white LED light sources.

Characteristics

Physical

Cerium is the second element of the lanthanide series. In the periodic table, it appears between the lanthanides lanthanum to its left and praseodymium to its right, and above the actinide thorium. It is a ductile metal with a hardness similar to that of silver.[1] Its 58 electrons are arranged in the configuration [Xe]4f15d16s2, of which the four outer electrons are valence electrons.[2] The 4f, 5d, and 6s energy levels are very close to each other, and the transfer of one electron to the 5d shell is due to strong interelectronic repulsion in the compact 4f shell. This effect is overwhelmed when the atom is positively ionised; thus Ce2+ on its own has instead the regular configuration [Xe]4f2, although in some solid solutions it may be [Xe]4f15d1.[3] Most lanthanides can use only three electrons as valence electrons, as afterwards the remaining 4f electrons are too strongly bound: cerium is an exception because of the stability of the empty f-shell in Ce4+ and the fact that it comes very early in the lanthanide series, where the nuclear charge is still low enough until neodymium to allow the removal of the fourth valence electron by chemical means.[4]

Cerium has a variable electronic structure. The energy of the 4f electron is nearly the same as that of the outer 5d and 6s electrons that are delocalized in the metallic state, and only a small amount of energy is required to change the relative occupancy of these electronic levels. This gives rise to dual valence states. For example, a volume change of about 10% occurs when cerium is subjected to high pressures or low temperatures. It appears that the valence changes from about 3 to 4 when it is cooled or compressed.[5]

Chemical properties of the element

Like the other lanthanides, cerium metal is a good reducing agent, having standard reduction potential of E = −2.34 V for the Ce3+/Ce couple.[6] It tarnishes in air, forming a passivating oxide layer like iron rust. A centimeter-sized sample of cerium metal corrodes completely in about a year. More dramatically, metallic cerium can be highly pyrophoric:[7]

Ce + O2 → CeO2

Being highly electropositive, cerium reacts with water. The reaction is slow with cold water but speeds up with increasing temperature, producing cerium(III) hydroxide and hydrogen gas:[8]

2 Ce + 6 H2O → 2 Ce(OH)3 + 3 H2

Allotropes

Cerium phase diagram
Phase diagram of cerium

Four allotropic forms of cerium are known to exist at standard pressure and are given the common labels of α to δ:[9]

  • The high-temperature form, δ-cerium, has a bcc (body-centered cubic) crystal structure and exists above 726 °C.
  • The stable form below 726 °C to approximately room temperature is γ-cerium, with an fcc (face-centered cubic) crystal structure.
  • The DHCP (double hexagonal close-packed) form β-cerium is the equilibrium structure approximately from room temperature to −150 °C.
  • The fcc form α-cerium is stable below about −150 °C; it has a density of 8.16 g/cm3.
  • Other solid phases occurring only at high pressures are shown on the phase diagram.
  • Both γ and β forms are quite stable at room temperature, although the equilibrium transformation temperature is estimated at 75 °C.[9]

At lower temperatures the behavior of cerium is complicated by the slow rates of transformation. Transformation temperatures are subject to substantial hysteresis and values quoted here are approximate. Upon cooling below −15 °C, γ-cerium starts to change to β-cerium, but the transformation involves a volume increase and, as more β forms, the internal stresses build up and suppress further transformation.[9] Cooling below approximately −160 °C will start formation of α-cerium but this is only from remaining γ-cerium. β-cerium does not significantly transform to α-cerium except in the presence of stress or deformation.[9] At atmospheric pressure, liquid cerium is more dense than its solid form at the melting point.[1][10][11]

Isotopes

Шаблон:Main Naturally occurring cerium is made up of four isotopes: 136Ce (0.19%), 138Ce (0.25%), 140Ce (88.4%), and 142Ce (11.1%). All four are observationally stable, though the light isotopes 136Ce and 138Ce are theoretically expected to undergo double electron capture to isotopes of barium, and the heaviest isotope 142Ce is expected to undergo double beta decay to 142Nd or alpha decay to 138Ba. Thus, 140Ce is the only theoretically stable isotope. None of these decay modes have yet been observed, though the double beta decay of 136Ce, 138Ce, and 142Ce have been experimentally searched for. The current experimental limits for their half-lives are:Шаблон:NUBASE2016

136Ce: >3.8×1016 y
138Ce: >5.7×1016 y
142Ce: >5.0×1016 y

All other cerium isotopes are synthetic and radioactive. The most stable of them are 144Ce with a half-life of 284.9 days, 139Ce with a half-life of 137.6 days, and 141Ce with a half-life of 32.5 days. All other radioactive cerium isotopes have half-lives under four days, and most of them have half-lives under ten minutes.Шаблон:NUBASE2016 The isotopes between 140Ce and 144Ce inclusive occur as fission products of uranium.Шаблон:NUBASE2016 The primary decay mode of the isotopes lighter than 140Ce is inverse beta decay or electron capture to isotopes of lanthanum, while that of the heavier isotopes is beta decay to isotopes of praseodymium.Шаблон:NUBASE2016 Some isotopes of neodymium can alpha decay or are predicted to decay to isotopes of cerium.[12]

The rarity of the proton-rich 136Ce and 138Ce is explained by the fact that they cannot be made in the most common processes of stellar nucleosynthesis for elements beyond iron, the s-process (slow neutron capture) and the r-process (rapid neutron capture). This is so because they are bypassed by the reaction flow of the s-process, and the r-process nuclides are blocked from decaying to them by more neutron-rich stable nuclides. Such nuclei are called p-nuclei, and their origin is not yet well understood: some speculated mechanisms for their formation include proton capture as well as photodisintegration.[13] 140Ce is the most common isotope of cerium, as it can be produced in both the s- and r-processes, while 142Ce can only be produced in the r-process. Another reason for the abundance of 140Ce is that it is a magic nucleus, having a closed neutron shell (it has 82 neutrons), and hence it has a very low cross section towards further neutron capture. Although its proton number of 58 is not magic, it is granted additional stability, as its eight additional protons past the magic number 50 enter and complete the 1g7/2 proton orbital.[13] The abundances of the cerium isotopes may differ very slightly in natural sources, because 138Ce and 140Ce are the daughters of the long-lived primordial radionuclides 138La and 144Nd, respectively.Шаблон:NUBASE2016

Compounds

Cerium exists in two main oxidation states, Ce(III) and Ce(IV). This pair of adjacent oxidation states dominates several aspects of the chemistry of this element. Cerium(IV) aqueous solutions may be prepared by reacting cerium(III) solutions with the strong oxidizing agents peroxodisulfate or bismuthate. The value of E(Ce4+/Ce3+) varies widely depending on conditions due to the relative ease of complexation and hydrolysis with various anions, although +1.72 V is representative. Cerium is the only lanthanide which has important aqueous and coordination chemistry in the +4 oxidation state.[6]

Halides

Cerium forms all four trihalides CeX3 (X = F, Cl, Br, I) usually by reaction of the oxides with the hydrogen halides. The anhydrous halides are pale-colored, paramagnetic, hygroscopic solids. Upon hydration, the trihalides convert to complexes containing aquo complexes [Ce(H2O)8-9]3+. Unlike most lanthanides, Ce forms a tetrafluoride, a white solid. It also forms a bronze-colored diiodide, which has metallic properties.[14] Aside from the binary halide phases, a number of anionic halide complexes are known. The fluoride gives the Ce(IV) derivatives Шаблон:Chem2 and Шаблон:Chem2. The chloride gives the orange Шаблон:Chem2.[6]

Oxides and chalcogenides

Cerium(IV) oxide ("ceria") has the fluorite structure, similarly to the dioxides of praseodymium and terbium. Ceria is a nonstoichiometric compound, meaning that the real formula is CeO2−x, where x is about 0.2. Thus, the material is not perfectly described as Ce(IV). Ceria reduces to cerium(III) oxide with hydrogen gas.[15] Many nonstoichiometric chalcogenides are also known, along with the trivalent Ce2Z3 (Z = S, Se, Te). The monochalcogenides CeZ conduct electricity and would better be formulated as Ce3+Z2−e. While CeZ2 are known, they are polychalcogenides with cerium(III): cerium(IV) derivatives of S, Se, and Te are unknown.[15]

Cerium(IV) complexes

Ceric ammonium nitrate
Ceric ammonium nitrate

The compound ceric ammonium nitrate ("CAN") Шаблон:Chem2 is the most common cerium compound encountered in the laboratory. The six nitrate ligands bind as bidentate ligands. The complex Шаблон:Chem2 is 12-coordinate, a high coordination number which emphasizes the large size of the Ce4+ ion. CAN is a popular oxidant in organic synthesis, both as a stoichiometric reagent[16] and as a catalyst.[17] It is inexpensive, and easily handled. It operates by one-electron redox. Cerium nitrates also form 4:3 and 1:1 complexes with 18-crown-6 (the ratio referring to that between the nitrate and the crown ether). Classically CAN is a primary standard for quantitative analysis.[1][18] Cerium(IV) salts, especially cerium(IV) sulfate, are often used as standard reagents for volumetric analysis in cerimetric titrations.[19]

A white LED in operation
A white LED in operation: the diode produces monochromatic blue light but the Ce:YAG phosphor converts some of it into yellow light; the combination is perceived as white by the human eye.

Due to ligand-to-metal charge transfer, aqueous cerium(IV) ions are orange-yellow.[20] Aqueous cerium(IV) is metastable in water[21] and is a strong oxidizing agent that oxidizes hydrochloric acid to give chlorine gas.[6] In the Belousov–Zhabotinsky reaction, cerium oscillates between the +4 and +3 oxidation states to catalyze the reaction.[22]

Organocerium compounds

Organocerium chemistry is similar to that of the other lanthanides, often involving complexes of cyclopentadienyl and cyclooctatetraenyl ligands. Cerocene (Ce(C8H8)2) adopts the uranocene molecular structure.[23] The 4f electron in cerocene, Шаблон:Chem, is poised ambiguously between being localized and delocalized and this compound is considered intermediate-valent.[24] Alkyl, alkynyl, and alkenyl organocerium derivatives are prepared from the transmetallation of the respective organolithium or Grignard reagents, and are more nucleophilic but less basic than their precursors.[25][26]

History

The dwarf planet Ceres.
The dwarf planet and asteroid Ceres, after which cerium is named
Jöns Jakob Berzelius
Jöns Jakob Berzelius, one of the discoverers of cerium

Cerium was discovered in Bastnäs in Sweden by Jöns Jakob Berzelius and Wilhelm Hisinger, and independently in Germany by Martin Heinrich Klaproth, both in 1803.[27] Cerium was named by Berzelius after the asteroid Ceres, discovered two years earlier.[27][28] The asteroid is itself named after the Roman goddess Ceres, goddess of agriculture, grain crops, fertility and motherly relationships.[27]

Cerium was originally isolated in the form of its oxide, which was named ceria, a term that is still used. The metal itself was too electropositive to be isolated by then-current smelting technology, a characteristic of rare-earth metals in general. After the development of electrochemistry by Humphry Davy five years later, the earths soon yielded the metals they contained. Ceria, as isolated in 1803, contained all of the lanthanides present in the cerite ore from Bastnäs, Sweden, and thus only contained about 45% of what is now known to be pure ceria. It was not until Carl Gustaf Mosander succeeded in removing lanthana and "didymia" in the late 1830s that ceria was obtained pure. Wilhelm Hisinger was a wealthy mine-owner and amateur scientist, and sponsor of Berzelius. He owned and controlled the mine at Bastnäs, and had been trying for years to find out the composition of the abundant heavy gangue rock (the "Tungsten of Bastnäs", which despite its name contained no tungsten), now known as cerite, that he had in his mine.[28] Mosander and his family lived for many years in the same house as Berzelius, and Mosander was undoubtedly persuaded by Berzelius to investigate ceria further.[29][30][31][32]

The element played a role in the Manhattan Project, where cerium compounds were investigated in the Berkeley site as materials for crucibles for uranium and plutonium casting.[33] For this reason, new methods for the preparation and casting of cerium were developed within the scope of the Ames daughter project (now the Ames Laboratory).[34] Production of extremely pure cerium in Ames commenced in mid-1944 and continued until August 1945.[34]

Occurrence and production

Cerium is the most abundant of all the lanthanides, making up 66 ppm of the Earth's crust; this value is just behind that of copper (68 ppm), and cerium is even more abundant than common metals such as lead (13 ppm) and tin (2.1 ppm). Thus, despite its position as one of the so-called rare-earth metals, cerium is actually not rare at all.[35] Cerium content in the soil varies between 2 and 150 ppm, with an average of 50 ppm; seawater contains 1.5 parts per trillion of cerium.[28] Cerium occurs in various minerals, but the most important commercial sources are the minerals of the monazite and bastnäsite groups, where it makes up about half of the lanthanide content. Monazite-(Ce) is the most common representative of the monazites, with "-Ce" being the Levinson suffix informing on the dominance of the particular REE element representative.[36][37][38] Also the cerium-dominant bastnäsite-(Ce) is the most important of the bastnäsites.[39][36] Cerium is the easiest lanthanide to extract from its minerals because it is the only one that can reach a stable +4 oxidation state in aqueous solution.[40] Because of the decreased solubility of cerium in the +4 oxidation state, cerium is sometimes depleted from rocks relative to the other rare-earth elements and is incorporated into zircon, since Ce4+ and Zr4+ have the same charge and similar ionic radii.[41] In extreme cases, cerium(IV) can form its own minerals separated from the other rare-earth elements, such as cerianite-(Ce),[42][38][36] Шаблон:Chem.[43][44][45]

Crystal structure of basntäsite-(Ce).
Crystal structure of bastnäsite-(Ce). Color code: carbon, C, blue-gray; fluorine, F, green; cerium, Ce, white; oxygen, O, red.

Bastnäsite, LnIIICO3F, is usually lacking in thorium and the heavy lanthanides beyond samarium and europium, and hence the extraction of cerium from it is quite direct. First, the bastnäsite is purified, using dilute hydrochloric acid to remove calcium carbonate impurities. The ore is then roasted in the air to oxidize it to the lanthanide oxides: while most of the lanthanides will be oxidized to the sesquioxides Ln2O3, cerium will be oxidized to the dioxide CeO2. This is insoluble in water and can be leached out with 0.5 M hydrochloric acid, leaving the other lanthanides behind.[40]

The procedure for monazite, Шаблон:Chem, which usually contains all the rare earths, as well as thorium, is more involved. Monazite, because of its magnetic properties, can be separated by repeated electromagnetic separation. After separation, it is treated with hot concentrated sulfuric acid to produce water-soluble sulfates of rare earths. The acidic filtrates are partially neutralized with sodium hydroxide to pH 3–4. Thorium precipitates out of solution as hydroxide and is removed. After that, the solution is treated with ammonium oxalate to convert rare earths to their insoluble oxalates. The oxalates are converted to oxides by annealing. The oxides are dissolved in nitric acid, but cerium oxide is insoluble in HNO3 and hence precipitates out.[11] Care must be taken when handling some of the residues as they contain 228Ra, the daughter of 232Th, which is a strong gamma emitter.[40]

Applications

Carl Auer von Welsbach
Carl Auer von Welsbach, who discovered many applications of cerium

Cerium has two main applications, both of which use CeO2. The industrial application of ceria is for polishing, especially chemical-mechanical planarization (CMP). In its other main application, CeO2 is used to decolorize glass. It functions by converting green-tinted ferrous impurities to nearly colorless ferric oxides.[46] Ceria has also been used as a substitute for its radioactive congener thoria, for example in the manufacture of electrodes used in gas tungsten arc welding, where ceria as an alloying element improves arc stability and ease of starting while decreasing burn-off.[47]

Gas mantles and pyrophoric alloys

The first use of cerium was in gas mantles, invented by Austrian chemist Carl Auer von Welsbach. In 1885, he had previously experimented with mixtures of magnesium, lanthanum, and yttrium oxides, but these gave green-tinted light and were unsuccessful.[48] Six years later, he discovered that pure thorium oxide produced a much better, though blue, light, and that mixing it with cerium dioxide resulted in a bright white light.[49] Cerium dioxide also acts as a catalyst for the combustion of thorium oxide.Шаблон:Cn

This resulted in commercial success for von Welsbach and his invention, and created great demand for thorium. Its production resulted in a large amount of lanthanides being simultaneously extracted as by-products.[50] Applications were soon found for them, especially in the pyrophoric alloy known as "mischmetal" composed of 50% cerium, 25% lanthanum, and the remainder being the other lanthanides, that is used widely for lighter flints.[50] Usually iron is added to form the alloy ferrocerium, also invented by von Welsbach.[51] Due to the chemical similarities of the lanthanides, chemical separation is not usually required for their applications, such as the addition of mischmetal to steel as an inclusion modifier to improve mechanical properties, or as catalysts for the cracking of petroleum.[40] This property of cerium saved the life of writer Primo Levi at the Auschwitz concentration camp, when he found a supply of ferrocerium alloy and bartered it for food.[52]

Pigments and phosphors

The photostability of pigments can be enhanced by the addition of cerium, as it provides pigments with lightfastness and prevents clear polymers from darkening in sunlight.[53] An example of a cerium compound used on its own as an inorganic pigment is the vivid red cerium(III) sulfide (cerium sulfide red), which stays chemically inert up to very high temperatures. The pigment is a safer alternative to lightfast but toxic cadmium selenide-based pigments.[28] The addition of cerium oxide to older cathode-ray tube television glass plates was beneficial, as it suppresses the darkening effect from the creation of F-center defects due to the continuous electron bombardment during operation. Cerium is also an essential component as a dopant for phosphors used in CRT TV screens, fluorescent lamps, and later white light-emitting diodes.[54][55] The most commonly used example is cerium(III)-doped yttrium aluminium garnet (Ce:YAG) which emits green to yellow-green light (550–530 nm) and also behaves as a scintillator.[56]

Other uses

Cerium salts, such as the sulfides Ce2S3 and Ce3S4, were considered during the Manhattan Project as advanced refractory materials for the construction of crucibles which could withstand the high temperatures and strongly reducing conditions when casting plutonium metal.[33][34] Despite desirable properties, these sulfides were never widely adopted due to practical issues with their synthesis.[33] Cerium is used as alloying element in aluminium to create castable eutectic aluminium alloys with 6–16 wt.% Ce, to which other elements such as Mg, Ni, Fe and Mn can be added. These Al-Ce alloys have excellent high temperature strength and are suitable for automotive applications e.g. in cylinder heads.[57] Other alloys of cerium include Pu-Ce and Pu-Ce-Co plutonium alloys, which have been used as nuclear fuel.[58]

Other automotive applications for the lower sesquioxide are as a catalytic converter for the oxidation of CO and NOx emissions in the exhaust gases from motor vehicles.[59][60]

Biological role and precautions

Шаблон:Chembox The early lanthanides have been found to be essential to some methanotrophic bacteria living in volcanic mudpots, such as Methylacidiphilum fumariolicum: lanthanum, cerium, praseodymium, and neodymium are about equally effective.[61][62] Cerium is otherwise not known to have biological role in any other organisms, but is not very toxic either; it does not accumulate in the food chain to any appreciable extent.[63][64][65] Because it often occurs together with calcium in phosphate minerals, and bones are primarily calcium phosphate, cerium can accumulate in bones in small amounts that are not considered dangerous.[66]

Cerium nitrate is an effective topical antimicrobial treatment for third-degree burns,[28][67] although large doses can lead to cerium poisoning and methemoglobinemia.[68] The early lanthanides act as essential cofactors for the methanol dehydrogenase of the methanotrophic bacterium Methylacidiphilum fumariolicum SolV, for which lanthanum, cerium, praseodymium, and neodymium alone are about equally effective.[69]

Like all rare-earth metals, cerium is of low to moderate toxicity. A strong reducing agent, it ignites spontaneously in air at 65 to 80 °C. Fumes from cerium fires are toxic. Water should not be used to stop cerium fires, as cerium reacts with water to produce hydrogen gas. Workers exposed to cerium have experienced itching, sensitivity to heat, and skin lesions. Cerium is not toxic when eaten, but animals injected with large doses of cerium have died due to cardiovascular collapse.[28] Cerium is more dangerous to aquatic organisms because it damages cell membranes; this is an important risk because it is not very soluble in water, thus causing contamination of the environment.[28]

References

Шаблон:Reflist

Bibliography

Шаблон:Periodic table (navbox) Шаблон:Cerium compounds

Шаблон:Authority control

  1. 1,0 1,1 1,2 Шаблон:RubberBible86th
  2. Greenwood and Earnshaw, pp. 1232–5
  3. Шаблон:Cite journal
  4. Шаблон:Holleman&Wiberg
  5. Шаблон:Cite journal
  6. 6,0 6,1 6,2 6,3 Greenwood and Earnshaw, pp. 1244–8
  7. Шаблон:Cite book
  8. Шаблон:Cite web
  9. 9,0 9,1 9,2 9,3 Шаблон:Cite journal
  10. Шаблон:Cite journal
  11. 11,0 11,1 Шаблон:Cite book
  12. Шаблон:Cite journal
  13. 13,0 13,1 Шаблон:Cite journal
  14. Greenwood and Earnshaw, pp. 1240–2
  15. 15,0 15,1 Greenwood and Earnshaw, pp. 1238–9
  16. Шаблон:Cite journal
  17. Шаблон:Cite journal
  18. Шаблон:Cite book
  19. Шаблон:Cite book
  20. Шаблон:Cite book
  21. Шаблон:Ullmann
  22. Шаблон:Cite journal
  23. Greenwood and Earnshaw, pp. 1248–9
  24. Шаблон:Cite journal
  25. Шаблон:Cite journal
  26. Шаблон:Cite journal
  27. 27,0 27,1 27,2 Шаблон:Cite web
  28. 28,0 28,1 28,2 28,3 28,4 28,5 28,6 Шаблон:Cite book
  29. Шаблон:Cite book
  30. Шаблон:Cite journal
  31. Шаблон:Cite journal
  32. Шаблон:Cite journal
  33. 33,0 33,1 33,2 Шаблон:Cite journal
  34. 34,0 34,1 34,2 Шаблон:Cite book
  35. Greenwood and Earnshaw, p. 1294
  36. 36,0 36,1 36,2 Шаблон:Cite journal
  37. Шаблон:Cite web
  38. 38,0 38,1 Шаблон:Cite web
  39. Шаблон:Cite web
  40. 40,0 40,1 40,2 40,3 Greenwood and Earnshaw, pp. 1229–1232
  41. Шаблон:Cite journal
  42. Шаблон:Cite web
  43. Шаблон:Cite journal
  44. Шаблон:Cite web
  45. nrmima.nrm.se
  46. Шаблон:Ullmann.
  47. Шаблон:Cite book
  48. Шаблон:Cite EB1911
  49. Шаблон:Cite book
  50. 50,0 50,1 Greenwood and Earnshaw, p. 1228
  51. Klaus Reinhardt and Herwig Winkler in "Cerium Mischmetal, Cerium Alloys, and Cerium Compounds" in Ullmann's Encyclopedia of Industrial Chemistry 2000, Wiley-VCH, Weinheim. Шаблон:Doi
  52. Шаблон:Cite news
  53. Шаблон:Cite journal
  54. Cerium dioxide Шаблон:Webarchive. nanopartikel.info (2011-02-02)
  55. Шаблон:Cite book
  56. Шаблон:Cite journal
  57. Шаблон:Cite journal
  58. Шаблон:Cite report
  59. Bleiwas, D.I. (2013). Potential for Recovery of Cerium Contained in Automotive Catalytic Converters. Reston, Va.: U.S. Department of the Interior, U.S. Geological Survey.
  60. Шаблон:Cite web
  61. Шаблон:Cite journal
  62. Kang, L., Shen, Z. & Jin, C. Neodymium cations Nd3+ were transported to the interior of Euglena gracilis 277. Chin.Sci.Bull. 45, 585–592 (2000). https://doi.org/10.1007/BF02886032
  63. Шаблон:Cite journal
  64. Шаблон:Cite journal
  65. Шаблон:Citation
  66. Шаблон:Cite book
  67. Шаблон:Cite journal
  68. Шаблон:Cite journal
  69. Шаблон:Cite journal