Английская Википедия:Chrysler PowerTech engine

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:About Шаблон:Infobox automobile engine The initial design development for the PowerTech V6 and V8 engine family was done by American Motors Corporation (AMC) and debuted in 1998 with credit to Chrysler. This was the first new V8 engine for Chrysler since the 1960s.[1] The companion V6 was basically the V8 with two fewer cylinders, another concept that originated at AMC before the company joined Chrysler.[2] These new engines had nothing in common with the Chrysler A engine V8s, nor the Jeep 4.0 L "PowerTech" I6 engine.

A 4.7 L V8 came first, available in the Jeep Grand Cherokee, and a 3.7 L V6 version debuted in 2002 for the Jeep Liberty. The PowerTech V6 and V8 were direct replacements for Chrysler's LA family in the early 2000s, and were also used in the Dodge Ram and started in the 2000 Dodge Durango. They were not used in any cars, but were reserved for truck and SUV use. They are also known as Next Generation Magnum in Dodge applications.

The PowerTech V6 and V8 engines were produced at the Mack Avenue Engine Complex in Detroit, Michigan. E85 compatible versions of some PowerTech engines were developed and used in numerous Chrysler vehicles. On April 9, 2013, the last 4.7 L engine was built; ending 15 years of production with over 3 million units built.[3]

4.7

The 4.7-liter version was the first of this family, appearing in the 1999 Jeep Grand Cherokee. The displacement is Шаблон:Convert with a bore and a stroke of Шаблон:Convert. It has a cast iron block and aluminum heads with two valves per cylinder. It uses chain-driven Single overhead camshafts, one in each head. It originally produced Шаблон:Convert and Шаблон:Convert of torque. The 4.7 L V8 is available with four speed and five speed automatic transmissions and a 5 speed manual transmission.

The PowerTech was on the Ward's 10 Best Engines list for 1999.

4.7 HO

A "High-Output" version of the 4.7 L PowerTech engine, producing Шаблон:Convert and Шаблон:Convert of torque, was introduced in 2002, first appearing in the Jeep Grand Cherokee Limited as an option and in the Jeep Grand Cherokee Overland as standard equipment.

This engine was discontinued after the 2008 model year, though the non high output 4.7L V8 engine continued to be available in all vehicles.

Файл:4.7 Powertech engine Jeep WJ.jpg
4.7 Powertech engine Jeep WJ

Applications:

2008 Revisions

The 2008 Dodge Dakota and Ram pickup trucks, Dodge Durango and Chrysler Aspen SUV's, Jeep Grand Cherokee, and Jeep Commander came with a Corsair version of the FFV 4.7 L engine, with dual spark plugs per cylinder, a new slant / squish combustion system design, and 9.8:1 compression, raising power to Шаблон:Convert and Шаблон:Convert of torque. The 2008 4.7 also features other upgrades including a more aggressive camshaft profile, a Шаблон:Convert throttle body, and an improved intake manifold with shorter runners. See Allpar's page on the latest 4.7 L.

3.7 EKG

Файл:Chrysler PowerTech 3.7.jpg
Chrysler PowerTech 3.7 L V6 in a 2005 Jeep Grand Cherokee

The EKG is a 3.7 L V6 version built in Detroit, Michigan. It displaces Шаблон:Convert.[4] The bore and stroke measure Шаблон:Convert. It is a 90° V engine like the V8, with SOHC 2-valve heads. It utilizes a counter-rotating balance shaft mounted between the cylinder banks to deal with vibration problems of the 90-degree V6 design, as well as use a 30-degree split pin crankshaft to fire the cylinders every 120 degrees. Output is Шаблон:Convert at 5200 rpm with Шаблон:Convert of torque at 4000 rpm.[4] It has a cast iron engine block and aluminum SOHC cylinder heads. It uses Sequential fuel injection, has roller followers, and features fracture-split forged powder metal connecting rods and an assembled reinforced plastic intake manifold.

The Chrysler 3.7 PowerTech engine used in the 2007 - 2012 Jeep Liberty KK used a wasted spark ignition system that uses one ignition coil to fire two cylinders.

3.7 Engine Specifications
Description Specification
Firing Order 1-6-5-4-3-2
Lead Cylinder #1 Left Bank
Compression Ratio 9.6:1
Oil Pressure at Idle 4 psi (25 kPa)
Oil Pressure @ 3000 RPM 25-110 psi (170-758 kPa)
Max Variation Between Cylinders 25%
Compression 170-225 PSI (1172-1551 kPa)
Cylinder Bore Diameter 3.6619 in. (93.013 mm)
Cylinder Out of Round (max) 0.003 in. (0.051 mm)
Cylinder Taper (max) 0.002 in. (0.051 mm)
Pistons
Piston Diameter 3.6605 in. (92.975 mm)
Piston Weight 12.87 oz. (365.0 grams)
Ring Groove Diameter No. 1: 3.282-3.273 in. (85.37-83.13 mm)

No. 2: 3.261-3.310 in. (82.833-83.033 mm)

No. 3: 3.302-3.310 in. (83.88-84.08 mm)

Piston Pin Diameter 0.9455-0.9456 in. (24.017-24.020 mm)
Piston Pin Clearance 0.0002-0.0005 in. (0.006-0.015 mm)
Piston Ring Gap
Top Compression Ring 0.0076-0.0142 in. (0.20-0.36 mm)
Second Compression Ring 0.0146-0.0249 in. (0.37-0.63 mm)
Oil Control Ring (Steel Rails) 0.0099-0.30 in. (0.25-0.76 mm)
Piston Ring Side Clearance
Top Compression Ring 0.0020-0.0037 in. (0.051-0.094 mm)
Second Compression Ring 0.0016-0.0031 in. (0.040-0.080 mm)
Oil Control Ring 0.0007-0.0091 in. (0.019-0.229 mm)
Piston Ring Width
Top Compression Ring 0.057-0.058 in. (1.472-1.490 mm)
Second Compression Ring 0.057-0.058 in. (1.472-1.490 mm)
Oil Control Ring 0.017-0.018 in. (0.445-0.470 mm)
Connecting Rods
Bearing Clearance 0.0002-0.0017 in. (0.006-0.044 mm)
Side Clearance 0.004-0.0138 in. (0.10-0.35 mm)
Piston Pin Clearance 0.0006-0.0011 in. (0.015-0.028 mm)
Bearing Bore Out of Round (max) 0.0002 in. (0.004mm)
Total Weight (No Bearing) 21.588 Ounces (612 Grams)
Crankshaft
Main Bearing Journal Diameter 2.4996-2.5005 in. (63.488-63.512 mm)
Main Bearing Clearance 0.00008-0.0018 in. (0.002-0.048 mm)
Main Bearing Out of Round (max) 0.0002 in. (0.282 mm)
Main Bearing Taper (max) 0.0004 in. (0.006 mm)
Connecting Rod Journal Diameter 2.2798-2.2792 in. (57.908-57.892 mm)
Connecting Rod Bearing Clearance 0.0002-0.0011 in. (0.006-0.044 mm)
Connecting Rod Bearing Out of Round (max) 0.0002 in. (0.005 mm)
Connecting Rod Bearing Taper (max) 0.0002 in. (0.006 mm)
End Play 0.0021-0.0112 in. (0.052-0.282 mm)
Camshaft
Bore Diameter 1.0245-1.0252 in. (26.02-28.04 mm)
Bearing Journal Diameter 1.0227-1.0235 in. (25.975-25.995 mm)
Bearing Clearance 0.001-0.0026 in. (0.025-0.065 mm)
End Play 0.003-0.0079 in. (0.075-0.200 mm)
Valve Timing
Valve Overlap 25.7°
Intake
Opens (Before Top Dead Center) 5.6°
Closes (After Top Dead Center) 240.1°
Durration 245.7°
Exhaust
Opens (Before Top Dead Center) 241.5°
Closes (After Top Dead Center) 20.1°
Durration 261.6°
Valves
Face Angle 45°-45.5°
Head Diameter
Intake 1.9103-1.9205 in. (48.52-48.78 mm)
Exhaust 1.4516-1.4618 in. (36.87-37.13 mm)
Length (Overall)
Intake 4.4666-4.4965 in. (113.45-114.21 mm)
Exhaust 4.5244-4.5543 in. (114.92-115.68 mm)
Stem Diameter
Intake 0.2729-0.2739 in. (6.931-6.957 mm)
Exhaust 0.2717-0.2728 in. (6.902-6.928 mm)
Stem-to-Guide Clearance
Intake 0.0008-0.0028 in. (0.018-0.069 mm)
Exhaust 0.0019-0.0039 in. (0.047-0.098 mm)
Valve Lift (Zero Lash)
Intake 0.472 in. (12.00 mm)
Exhaust 0.472 in. (12.00 mm)
Valve Springs
Free Length
Intake 1.896 in. (48.18 mm)
Exhaust w/ Damper 1.973 in. (49.2 mm)
Spring Force (Closed Valve)
Intake 74.53-82.72 lbs. @ 1.5795 in (332.0-358.0 N @ 40.12mm)
Exhaust w/o Damper 80.031-88.57 lbs. @ 1.54 in. (356-394 N @ 39.12 mm)
Spring Force (Open Valve)
Intake 213.2-233.8 lbs. @ 1.107 in. (948.0-1038.0 N @ 28.12 mm)
Exhaust w/o Damper 196.5-214.9 lbs. @ 1.057 in. (874-856 @ 27.12 mm)
Number of Coils
Intake 7.30
Exhaust 7.15
Wire Diameter
Intake 0.1878 x 0.1496 in. (4.77 x 3.80 mm)
Exhaust 0.1843 x 0.1464 in (4.66 x 3.72 mm)
Installed Height (Spring Seat to Bottom of Retainer)
Intake 1.579 in. (40.12 mm)
Exhaust w/ Damper 1.579 in. (40.12 mm)
Cylinder Head
Gasket Thickness 0.0276 in. (0.7mm)
Valve Seat Angle 44.5°-45.0°
Valve Seat Runout (max) 0.002 in. (0.051 mm)
Valve Seat Width
Intake Exhaust
0.0698-0.0928 in. (1.75-2.36 mm) 0.0673-0.091 in. (1.71-2.32 mm)
Guide Bore Diameter 0.2747-0.2756 in (6.975-7.00 mm)
Cylinder Head Warpage (Flatness) 0.002 in. (0.0508 mm)


Applications

References

  1. Шаблон:Cite web
  2. Шаблон:Cite web
  3. Ошибка цитирования Неверный тег <ref>; для сносок Final 4.7 не указан текст
  4. 4,0 4,1 Шаблон:Cite web

External links

Шаблон:Commons category

Шаблон:Chrysler Group LLC