Английская Википедия:Crystal polymorphism

Содержание

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

In crystallography, polymorphism describes the phenomenon where a compound or element can crystallize into more than one crystal structure. The preceding definition has evolved over many years and is still under discussion today. Discussion of the defining characteristics of polymorphism involves distinguishing among types of transitions and structural changes occurring in polymorphism versus those in other phenomena.

It is also useful to note that materials with two polymorphic phases can be called dimorphic, those with three polymorphic phases, trimorphic, etc.

Overview

Phase transitions (phase changes) that help describe polymorphism include polymorphic transitions as well as melting and vaporization transitions. According to IUPAC, a polymorphic transition is "A reversible transition of a solid crystalline phase at a certain temperature and pressure (the inversion point) to another phase of the same chemical composition with a different crystal structure." Additionally, Walter McCrone described the phases in polymorphic matter as "different in crystal structure but identical in the liquid or vapor states." McCrone also defines a polymorph as “a crystalline phase of a given compound resulting from the possibility of at least two different arrangements of the molecules of that compound in the solid state.” These defining facts imply that polymorphism involves changes in physical properties but cannot include chemical change. Some early definitions do not make this distinction.

Eliminating chemical change from those changes permissible during a polymorphic transition delineates polymorphism. For example, isomerization can often lead to polymorphic transitions. However, tautomerism (dynamic isomerization) leads to chemical change, not polymorphism. As well, allotropy of elements and polymorphism have been linked historically. However, allotropes of an element are not always polymorphs. A common example is the allotropes of carbon, which include graphite, diamond, and londsdaleite. While all three forms are allotropes, graphite is not a polymorph of diamond and londsdaleite. The reason is that graphite is chemically distinct, having sp² hybridized bonding, while diamond, and londsdaleite are chemically identical, both having sp³ hybridized bonding. Diamond and londsdaleite differ in their crystal structures but do not differ chemically. Isomerization and allotropy are only two of the phenomena linked to polymorphism. For additional information about identifying polymorphism and distinguishing it from other phenomena, see the review by Brog et al.

Polymorphism is of practical relevance to pharmaceuticals, agrochemicals, pigments, dyestuffs, foods, and explosives.

Detection

Experimental methods

Early records of the discovery of polymorphism credit Eilhard Mitscerlich and Jöns Jacob Berzelius for their studies of phosphates and arsenates in the early 1800s. The studies involved measuring the interfacial angles of the crystals to show that chemically identical salts could have two different forms. Mitscerlich originally called this discovery isomorphism. The measurement of crystal density was also used by Wilhelm Ostwald and expressed in Ostwald's Ratio.

The development of the microscope enhanced observations of polymorphism and aided Moritz Ludwig Frankenheim’s studies in the 1830s. He was able to demonstrate methods to induce crystal phase changes and formally summarized his findings on the nature of polymorphism. Soon after, the more sophisticated polarized light microscope came into use, and it provided better visualization of crystalline phases allowing crystallographers to distinguish between different polymorphs. The hot stage was invented and fitted to a polarized light microscope by Otto Lehmann in about 1877. This invention helped crystallographers determine melting points and observe polymorphic transitions.

While the use of hot stage microscopes continued throughout the 1900s, thermal methods also became commonly used to observe the heat flow that occurs during phase changes such as melting and polymorphic transitions. One such technique, differential scanning calorimetry (DSC), continues to be used for determining the enthalpy of polymorphic transitions.

In the 20th century, X-ray crystallography became commonly used for studying the crystal structure of polymorphs. Both single crystal x-ray diffraction and powder x-ray diffraction techniques are used to obtain measurements of the crystal unit cell. Each polymorph of a compound has a unique crystal structure. As a result, different polymorphs will produce different x-ray diffraction patterns.

Vibrational spectroscopic methods came into use for investigating polymorphism in the second half of the twentieth century and have become more commonly used as optical, computer, and semiconductor technologies improved. These techniques include infrared (IR) spectroscopy, terahertz spectroscopy and Raman spectroscopy. Mid-frequency IR and Raman spectroscopies are sensitive to changes in hydrogen bonding patterns. Such changes can subsequently be related to structural differences. Additionally, terahertz and low frequency Raman spectroscopies reveal vibrational modes resulting from intermolecular interactions in crystalline solids. Again, these vibrational modes are related to crystal structure and can be used to uncover differences in 3-dimensional structure among polymorphs.

Computational methods

Computational chemistry may be used in combination with vibrational spectroscopy techniques to understand the origins of vibrations within crystals. The combination of techniques provides detailed information about crystal structures, similar to what can be achieved with x-ray crystallography. In addition to using computational methods for enhancing the understanding of spectroscopic data, the latest development in identifying polymorphism in crystals is the field of crystal structure prediction. This technique uses computational chemistry to model the formation of crystals and predict the existence of specific polymorphs of a compound before they have been observed experimentally by scientists.

Examples

Many compounds exhibit polymorphism. It has been claimed that "every compound has different polymorphic forms, and that, in general, the number of forms known for a given compound is proportional to the time and money spent in research on that compound."

Organic compounds

Benzamide

The phenomenon was discovered in 1832 by Friedrich Wöhler and Justus von Liebig. They observed that the silky needles of freshly crystallized benzamide slowly converted to rhombic crystals. Present-day analysis identifies three polymorphs for benzamide: the least stable one, formed by flash cooling is the orthorhombic form II. This type is followed by the monoclinic form III (observed by Wöhler/Liebig). The most stable form is monoclinic form I. The hydrogen bonding mechanisms are the same for all three phases; however, they differ strongly in their pi-pi interactions.

Maleic acid

In 2006 a new polymorph of maleic acid was discovered, 124 years after the first crystal form was studied. Maleic acid is manufactured on an industrial scale in the chemical industry. It forms salt found in medicine. The new crystal type is produced when a co-crystal of caffeine and maleic acid (2:1) is dissolved in chloroform and when the solvent is allowed to evaporate slowly. Whereas form I has monoclinic space group P2₁/c, the new form has space group Pc. Both polymorphs consist of sheets of molecules connected through hydrogen bonding of the carboxylic acid groups: in form I, the sheets alternate with respect of the net dipole moment, while in form II, the sheets are oriented in the same direction.

1,3,5-Trinitrobenzene

After 125 years of study, 1,3,5-trinitrobenzene yielded a second polymorph. The usual form has the space group Pbca, but in 2004, a second polymorph was obtained in the space group Pca2₁ when the compound was crystallised in the presence of an additive, trisindane. This experiment shows that additives can induce the appearance of polymorphic forms.

Other organic compounds

Acridine has been obtained as eight polymorphs and aripiprazole has nine. The record for the largest number of well-characterised polymorphs is held by a compound known as ROY. Glycine crystallizes as both monoclinic and hexagonal crystals. Polymorphism in organic compounds is often the result of conformational polymorphism.

Inorganic compounds

Binary metal oxides

Polymorphism in binary metal oxides has attracted much attention because these materials are of significant economic value. One set of famous examples have the composition SiO₂, which form many polymorphs. Important ones include: α-quartz, β-quartz, tridymite, cristobalite, moganite, coesite, and stishovite.

Metal oxides	Phase	Conditions of P and T	Structure/Space Group
CrO2	α phase	Ambient conditionsCl2-type Orthorhombic
	RT and 12±3 GPa
	Cr2O3	Corundum phase	Ambient conditions	Corundum-type Rhombohedral (RШаблон:Overlinec)
High pressure phase		RT and 35 GPa	Rh2O3-II type
Fe2O3	α phase	Ambient conditions	Corundum-type Rhombohedral (RШаблон:Overlinec)
	β phase	Below 773 K	Body-centered cubic (IaШаблон:Overline)
	γ phase	Up to 933 K	Cubic spinel structure (FdШаблон:Overlinem)
	ε phase	--	Rhombic (Pna21)
Bi2O3	α phase	Ambient conditions	Monoclinic (P21/c)
	β phase	603-923 K and 1 atm	Tetragonal
	γ phase	773-912 K or RT and 1 atm	Body-centered cubic
	δ phase	912-1097 K and 1 atm	FCC (FmШаблон:Overlinem)
In2O3	Bixbyite-type phase	Ambient conditions	Cubic (IaШаблон:Overline)
	Corundum-type	15-25 GPa at 1273 K	Corundum-type Hexagonal (RШаблон:Overlinec)
	Rh2O3(II)-type	100 GPa and 1000 K	Orthorhombic
Al2O3	α phase	Ambient conditions	Corundum-type Trigonal (RШаблон:Overlinec)
	γ phase	773 K and 1 atm	Cubic (FdШаблон:Overlinem)
SnO2	α phase	Ambient conditions	Rutile-type Tetragonal (P42/mnm)
	CaCl2-type phase	15 KBar at 1073 K	Orthorhombic, CaCl2-type (Pnnm)
	α-PbO2-type	Above 18 KBar	α-PbO2-type (Pbcn)
TiO2	Rutile	Equilibrium phase	Rutile-type Tetragonal
	Anatase	Metastable phase (Not stable)	Tetragonal (I41/amd)
	Brookite	Metastable phase (Not stable)	Orthorhombic (Pcab)
ZrO2	Monoclinic phase	Ambient conditions	Monoclinic (P21/c)
	Tetragonal phase	Above 1443 K	Tetragonal (P42/nmc)
	Fluorite-type phase	Above 2643 K	Cubic (FmШаблон:Overlinem)
MoO3	α phase	553-673 K & 1 atm	Orthorhombic (Pbnm)
	β phase	553-673 K & 1 atm	Monoclinic
	h phase	High-pressure and high-temperature phase	Hexagonal (P6a/m or P6a)
	MoO3-II	60 kbar and 973 K	Monoclinic
WO3	ε phase	Up to 220 K	Monoclinic (Pc)
	δ phase	220-300 K	Triclinic (P1)
	γ phase	300-623 K	Monoclinic (P21/n)
	β phase	623-900 K	Orthorhombic (Pnma)
	α phase	Above 900 K	Tetragonal (P4/ncc)

Other inorganic materials

Classical examples of polymorphism are the pair of minerals calcite and aragonite, both forms of calcium carbonate.

β-HgS precipitates as a black solid when Hg(II) salts are treated with H₂S. With gentle heating of the slurry, the black polymorph converts to the red form.

Factors affecting polymorphism

According to Ostwald's rule, usually less stable polymorphs crystallize before the stable form. The concept hinges on the idea that unstable polymorphs more closely resemble the state in solution, and thus are kinetically advantaged. The founding case of fibrous vs rhombic benzamide illustrates the case. Another example is provided by two polymorphs of titanium dioxide. Nevertheless, there are known systems, such as metacetamol, where only narrow cooling rate favors obtaining metastable form II.

Polymorphs have disparate stabilities. Some convert rapidly at room (or any) temperature. Most polymorphs of organic molecules only differ by a few kJ/mol in lattice energy. Approximately 50% of known polymorph pairs differ by less than 2 kJ/mol and stability differences of more than 10 kJ/mol are rare. Valuable to mention that polymorph stability may change upon temperature or pressure. Important to note that structural and thermodybnamic stability are different. Thermodynamic stability may be studied using experimental or computational methods.

Polymorphism is affected by the details of crystallisation. The solvent in all respects affects the nature of the polymorph, including concentration, other components of the solvent, i.e., species that inhibiting or promote certain growth patterns. A decisive factor is often the temperature of the solvent from which crystallisation is carried out.

Metastable polymorphs are not always reproducibly obtained, leading to cases of "disappearing polymorphs", with usually negative implications on law and business.

In pharmaceuticals

Legal aspects

Drugs receive regulatory approval and are granted patents for only a single polymorph.

In a classic patent dispute, the GlaxoSmithKline defended its patent for the Type II polymorph of the active ingredient in Zantac against competitors while that of the Type I polymorph had already expired.

Polymorphism in drugs can also have direct medical implications since dissolution rates depend on the polymorph. Polymorphic purity of drug samples can be checked using techniques such as powder X-ray diffraction, IR/Raman spectroscopy, and utilizing the differences in their optical properties in some cases.

Case studies

The known cases up to 2015 are discussed in a review article by Bučar, Lancaster, and Bernstein.

Dibenzoxazepines

Multidisciplinary studies involving experimental and computational approaches were applied to pharmaceutical molecules to facilitate the comparison of their solid-state structures. Specifically, this study has focused on exploring how changes in molecular structure affect the molecular conformation, packing motifs, interactions in the resultant crystal lattices and the extent of solid-state diversity of these compounds. The results highlight the value of crystal structure prediction studies and PIXEL calculations in the interpretation of the observed solid-state behaviour and quantifying the intermolecular interactions in the packed structures and identifying the key stabilising interactions. An experimental screen yielded 4 physical forms for clozapine as compared to 60 distinct physical forms for olanzapine. The experimental screening results of clozapine are consistent with its crystal energy landscape which confirms that no alternate packing arrangement is thermodynamically competitive to the experimentally obtained structure. Whilst in case of olanzapine, crystal energy landscape highlights that the extensive experimental screening has probably not found all possible polymorphs of olanzapine, and further solid form diversity could be targeted with a better understanding of the role of kinetics in its crystallisation. CSP studies were able to offer an explanation for the absence of the centrosymmetric dimer in anhydrous clozapine. PIXEL calculations on all the crystal structures of clozapine revealed that similar to olanzapine, the intermolecular interaction energy in each structure is also dominated by the Ed. Despite the molecular structure similarity between amoxapine and loxapine (molecules in group 2), the crystal packing observed in polymorphs of loxa differs significantly from the amoxapine. A combined experimental and computational study demonstrated that the methyl group in loxapine has a significant influence in increasing the range of accessible solid forms and favouring various alternate packing arrangements. CSP studies have again helped in explaining the observed solid-state diversity of loxapine and amoxapine. PIXEL calculations showed that in absence of strong H-bonds, weak H-bonds such as C–H...O, C–H...N and dispersion interactions play a key role in stabilising the crystal lattice of both the molecules. Efficient crystal packing of amoxapine seems to be contributing towards its monomorphic behaviour as compared to the comparatively less efficient packing of loxapine molecules in both polymorphs. The combination of experimental and computational approaches has provided a deeper understanding of the factors influencing the solid-state structure and diversity in these compounds. Hirshfeld surfaces using Crystal Explorer represent another way of exploring packing modes and intermolecular interactions in molecular crystals. The influence of changes in the small substituents on shape and electron distribution can also be investigated by mapping the total electron density on the electrostatic potential for molecules in the gas phase. This allows straightforward visualisation and comparison of overall shape, electron-rich and electron-deficient regions within molecules. The shape of these molecules can be further investigated to study its influence on diverse solid-state diversity.

Posaconazole

The original formulations of posaconazole on the market licensed as Noxafil^(R) were formulated utilising form I of posaconazole. The discovery of polymorphs of posaconazole increased rapidly and resulted in much research in crystallography of posaconazole. A methanol solvate and a 1,4-dioxane co-crystal were added to the Cambridge Structural Database (CSD).

Ritonavir

The antiviral drug ritonavir exists as two polymorphs, which differ greatly in efficacy. Such issues were solved by reformulating the medicine into gelcaps and tablets, rather than the original capsules.

Aspirin

There was only one proven polymorph Form I of aspirin, though the existence of another polymorph was debated since the 1960s, and one report from 1981 reported that when crystallized in the presence of aspirin anhydride, the diffractogram of aspirin has weak additional peaks. Though at the time it was dismissed as mere impurity, it was, in retrospect, Form II aspirin.

Form II was reported in 2005, found after attempted co-crystallization of aspirin and levetiracetam from hot acetonitrile.

In form I, pairs of aspirin molecules form centrosymmetric dimers through the acetyl groups with the (acidic) methyl proton to carbonyl hydrogen bonds. In form II, each aspirin molecule forms the same hydrogen bonds, but with two neighbouring molecules instead of one. With respect to the hydrogen bonds formed by the carboxylic acid groups, both polymorphs form identical dimer structures. The aspirin polymorphs contain identical 2-dimensional sections and are therefore more precisely described as polytypes.

Pure Form II aspirin could be prepared by seeding the batch with aspirin anhydrate in 15% weight.

Paracetamol

Paracetamol powder has poor compression properties, which poses difficulty in making tablets. A second polymorph was found with more suitable compressive properties.

Cortisone acetate

Cortisone acetate exists in at least five different polymorphs, four of which are unstable in water and change to a stable form.

Carbamazepine

Carbamazepine, estrogen, paroxetine, and chloramphenicol also show polymorphism.

Pyrazinamide

Pyrazinamide has at least 4 polymorphs. All of them transforms to stable α form at room temperature upon storage or mechanical treatment. Recent studies prove that α form is thermodynamically stable at room temperature.

Polytypism

Polytypes are a special case of polymorphs, where multiple close-packed crystal structures differ in one dimension only. Polytypes have identical close-packed planes, but differ in the stacking sequence in the third dimension perpendicular to these planes. Silicon carbide (SiC) has more than 170 known polytypes, although most are rare. All the polytypes of SiC have virtually the same density and Gibbs free energy. The most common SiC polytypes are shown in Table 1.

Table 1: Some polytypes of SiC.

Phase	Structure	Ramsdell notation	Stacking sequence	Comment
α-SiC	hexagonal	2H	AB	wurtzite form
α-SiC	hexagonal	4H	ABCB
α-SiC	hexagonal	6H	ABCACB	the most stable and common form
α-SiC	rhombohedral	15R	ABCACBCABACABCB
β-SiC	face-centered cubic	3C	ABC	sphalerite or zinc blende form

A second group of materials with different polytypes are the transition metal dichalcogenides, layered materials such as molybdenum disulfide (MoS₂). For these materials the polytypes have more distinct effects on material properties, e.g. for MoS₂, the 1T polytype is metallic in character, while the 2H form is more semiconducting. Another example is tantalum disulfide, where the common 1T as well as 2H polytypes occur, but also more complex 'mixed coordination' types such as 4Hb and 6R, where the trigonal prismatic and the octahedral geometry layers are mixed. Here, the 1T polytype exhibits a charge density wave, with distinct influence on the conductivity as a function of temperature, while the 2H polytype exhibits superconductivity.

ZnS and CdI₂ are also polytypical. It has been suggested that this type of polymorphism is due to kinetics where screw dislocations rapidly reproduce partly disordered sequences in a periodic fashion.

Theory

Файл:Energy-Temperature diagrams of a system exhibiting two polymorphic forms with enantiotropic behaviour (left) and monotropic behaviour (right)..jpg

Solid phase transitions which transform reversibly without passing through the liquid or gaseous phases are called enantiotropic. In contrast, if the modifications are not convertible under these conditions, the system is monotropic. Experimental data are used to differentiate between enantiotropic and monotropic transitions and energy/temperature semi-quantitative diagrams can be drawn by applying several rules, principally the heat-of-transition rule, the heat-of-fusion rule and the density rule. These rules enable the deduction of the relative positions of the H and Gisobars in the E/T diagram. [1]

In terms of thermodynamics, two types of polymorphic behaviour are recognized. For a monotropic system, plots of the free energies of the various polymorphs against temperature do not cross before all polymorphs melt. As a result, any transition from one polymorph to another below the melting point will be irreversible. For an enantiotropic system, a plot of the free energy against temperature shows a crossing point before the various melting points. It may also be possible to convert interchangeably between the two polymorphs by heating or cooling, or through physical contact with a lower energy polymorph.

A simple model of polymorphism is to model the Gibbs free energy of a ball-shaped crystal as <math>G = a r^2 - b r^3</math>. Here, the first term <math>ar^2</math> is the surface energy, and the second term <math>-br^3</math> is the volume energy. Both parameters <math>a, b > 0</math>. The function <math>G(r)</math> rises to a maximum before dropping, crossing zero at <math>r_{crit}</math>. In order to crystallize, a ball of crystal much overcome the energetic barrier to the <math>r > r_{crit}</math> part of the energy landscape.

Файл:Polymorphism Gibbs free energy.png

Figure 2

Now, suppose there are two kinds of crystals, with different energies <math>G_1 = a_1 r^2 - b_1 r^3</math> and <math>G_2 = a_2 r^2 - b_2 r^3</math>, and if they have the same shape as in Figure 2, then the two curves intersect at some <math>r'_{crit} > r_{crit, 1}</math>. Then the system has three phases:

• <math>r < r_{crit, 1}</math>. Crystals tend to dissolve. Amorphous phase.
• <math>r_{crit, 1} < r < r'_{crit}</math>. Crystals tend to grow as form 1.
• <math>r > r'_{crit}</math>. Crystals tend to grow as form 2.

If the crystal is grown slowly, it could be kinetically stuck in form 1.

See also

• Isomorphism (crystallography)
• Dimorphism (Wiktionary)
• Polyamorphism

External links

• "Small Molecule Crystallization" (PDF) at Illinois Institute of Technology website
• "SiC and Polytpism"