The Dornier Do K was a German commercial passenger and freight monoplane, designed by Claude Dornier and built by Dornier Flugzeugwerke.[1] Only three prototypes of different designs were built and the type was not a commercial success.[1]
The first Dornier Do K was the K1 which first flew on 7 May 1929.[1] The K1 was a conventionally-braced high-wing monoplane, powered by a single nose-mounted Шаблон:Convert licence-built Bristol Jupiter VI radial engine, and had a conventional landing gear with a tailskid.[1] The square-section fuselage had an enclosed cockpit for two with a cabin behind for freight or eight passengers.[1] Test flights showed that performance was poor and the aircraft was redesigned.[1]
Do K2
The Do K2 flew in December 1929 with similar wings and fuselage but had a changed landing gear and four Шаблон:ConvertGnome-Rhone Titan radial engines.[1] The four engines were strut mounted on each side of the fuselage in tandem pairs, one in tractor configuration and the other as a pusher.[1] Although the aircraft had an increase in available power, the performance was little improved on the K1.[1]
Do K3
The K3 was a complete rethink of the design. The braced wing was replaced with a cantilever wing of larger span.[1] The fuselage was changed to oval and stretched for two extra passengers and the tailskid was replaced with a tailwheel and the main units were enclosed in fairings.[1] The four engines were in the same tandem arrangement as the K2, but located lower on the fuselage and changed to Шаблон:ConvertWalter Castor radial engines.[1] The performance was greatly improved but still provoked little interest and no others were built.[1]
