Английская Википедия:Dry cleaning

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:About Шаблон:More footnotes needed

Файл:Bundesarchiv Bild 183-P0226-0010, Dommitzsch-Trossin, Blick in die Reinigung.jpg
A dry-cleaner in East Germany, 1975

Dry cleaning is any cleaning process for clothing and textiles using a solvent other than water.

Dry cleaning still involves liquid, but clothes are instead soaked in a water-free liquid solvent (usually non-polar, as opposed to water which is a polar solvent). Tetrachloroethylene (perchloroethylene), known in the industry as "perc", is the most widely used solvent. Alternative solvents are 1-bromopropane and hydrocarbons.[1]

Most natural fibers can be washed in water but some synthetics (e.g., viscose, lyocell, modal, and cupro) react poorly with water and should be dry-cleaned if possible.[2]

History

Файл:Donini dry cleaning machines (Bologna) 3.jpg
Italian dry cleaning machine used in France in the 1960s

Шаблон:Expand section The ancient Greeks and Romans had some waterless methods to clean textiles, involving the use of powdered chemicals and absorbent clay (fuller's earth).Шаблон:Citation needed By the 1700s, the French were using turpentine-based solvents for specialized cleaning.Шаблон:Citation needed

Modern solvent-based dry cleaning may have originated in 1821 with American entrepreneur Thomas L. Jennings. Jennings referred to his method as "dry scouring".[3]

French dye-works operator Jean Baptiste Jolly[4]Шаблон:Efn developed his own method using kerosene and gasoline to clean fabrics.[4] He opened the first dry cleaning service in Paris in 1845.[5]

Flammability concerns led William Joseph Stoddard, a dry cleaner from Atlanta, to develop in 1924 Stoddard solvent (white spirit) as a slightly less flammable alternative to gasoline-based solvents.

The use of highly flammable petroleum solvents caused many fires and explosions, resulting in government regulation of dry cleaners.

Shift to chlorinated solvents

After World War I, dry cleaners began using chlorinated solvents. These solvents were much less flammable than petroleum solvents and had improved cleaning power.Шаблон:Citation needed Early solvents were carbon tetrachloride and trichloroethylene (TCE), but they gradually were phased out as their adverse health effects became more known. TCE may still occasionally be used for spot cleaning of difficult stains.

By the mid-1930s, the dry cleaning industry had started to use tetrachloroethylene (also called perchloroethylene or PCE) as the solvent. It has excellent cleaning power and is nonflammable and compatible with most garments. Because it is stable, tetrachloroethylene is readily recycled, but it is persistent if released into the environment.[1]

Infrastructure

From the customer's perspective, dry cleaning businesses are either "plants" or "drop shops". The former does on-site cleaning, while a drop shop receives garments from customers, sends them to a large plant, and then has the cleaned garments returned to the shop for pickup by the customer. The latter setup minimized the risk of fire or dangerous fumes created by the cleaning process. At the time, dry cleaning had been accomplished by using two separate machines—one for the cleaning process and the second to remove the solvent from the garments.

Machines of this era were described as "vented"; their drying exhausts were expelled into the atmosphere, the same as many modern tumble-dryer exhausts. This contributed to environmental contamination, and much potentially reusable solvent was lost to the atmosphere. Today, much stricter controls on solvent emissions have ensured that all dry cleaning machines in the Western world are fully enclosed, and no solvent fumes are vented to the atmosphere.Шаблон:Citation needed In enclosed machines, solvent extracted during the drying process is recovered and purified by distillation, so it can be reused to clean further loads or safely disposed of. Most modern enclosed machines also incorporate a computer-controlled drying sensor, which automatically senses when all detectable traces of PCE have been removed. This system ensures that only small amounts of PCE fumes are released at the end of the cycle.

Mechanism

Файл:Cellulose Sessel.svg
Structure of cellulose, the main constituent of cotton. The many OH groups bind water, leading to swelling of the fabric and leading to wrinkling, which is minimized when these materials are treated with tetrachloroethylene or other dry cleaning solvents.

In terms of mechanism, dry cleaning selectively solubilizes stains on the article. The solvents are non-polar and tend to selectively extract many compounds that cause stains. These stains would otherwise only dissolve in aqueous detergent mixtures at high temperatures, potentially damaging delicate fabrics.

Non-polar solvents are also good for some fabrics, especially natural fabrics, as the solvent does not interact with any polar groups within the fabric. Water binds to these polar groups which results in the swelling and stretching of proteins within fibers during laundering. Also, the binding of water molecules interferes with weak attractions within the fiber, resulting in the loss of the fiber's original shape. After the laundry cycle, water molecules will evaporate. However, the original shape of the fibers has already been distorted and this commonly results in shrinkage. Non-polar solvents prevent this interaction, protecting more delicate fabrics.

The usage of an effective solvent coupled with mechanical friction from tumbling effectively removes stains.

Process

Файл:EazyClean EC124 dry cleaning machine.jpg
A modern dry cleaning machine with touchscreen and SPS control. Manufacturer: EazyClean, type EC124. Photo taken prior to installation.
Файл:Drycleanmachine.JPG
Series 3 dry cleaning machine with PLC control. Manufacturer: BÖWE Textile Cleaning; Germany.
Файл:Dry clean rack.jpg
Many dry cleaners place cleaned clothes inside thin clear plastic garment bags.

A dry cleaning machine is similar to a combination of a domestic washing machine and clothes dryer. Garments are placed in the washing or extraction chamber (referred to as the "basket" or "drum"), which constitutes the core of the machine. The washing chamber contains a horizontal-axis, perforated drum that rotates within an outer shell. The shell holds the solvent while the rotating drum holds the garment load. The basket capacity is between about Шаблон:Convert.Шаблон:Citation needed

During the wash cycle, the chamber is filled approximately one-third full of solvent and begins to rotate, agitating the clothing. The solvent temperature is maintained at Шаблон:Cvt or lower, as a higher temperature may damage it. During the wash cycle, the solvent in the chamber (commonly known as the "cage" or "tackle box") is passed through a filtration chamber and then fed back into the "cage". This is known as the cycle, and is continued for the wash duration. The solvent is then removed and sent to a distillation unit consisting of a boiler and condenser. The condensed solvent is fed into a separator unit where any remaining water is separated from the solvent, and the refined solvent fed into the clean solvent tank. The ideal flow rate is roughly 8 liters of solvent per kilogram of garments per minute (very approximately one gallon per pound of garments), depending on the size of the machine.

A typical wash cycle lasts for 8–15 minutes depending on the type of garments and degree of soiling. During the first three minutes, solvent-soluble soils dissolve into the perchloroethylene and loose, insoluble soil comes off. It takes 10–12 minutes after the loose soil has come off to remove any ground-in insoluble soil from garments. Machines using hydrocarbon solvents require a wash cycle of at least 25 minutes because of the much slower rate of solvation of solvent-soluble soils. A dry cleaning surfactant "soap" may also be added.

At the end of the wash cycle, the machine starts a rinse cycle where the garment load is rinsed with freshly distilled solvent dispensed from the solvent tank. This pure solvent rinse prevents discoloration caused by soil particles being deposited back into the garment from the "dirty" working solvent.

After the rinse cycle, the machine begins the extraction process, which recovers the solvent for reuse. Modern machines recover approximately 99.99% of the solvent employed. The extraction cycle begins by draining the solvent from the washing chamber and accelerating the basket to 350–450 rpm, causing much of the solvent to spin free of the fabric. Until this time, the cleaning is done in normal temperature, as the solvent is never heated during dry cleaning process. When no more solvent can be spun out, the machine starts the drying cycle.

During the drying cycle, the garments are tumbled in a stream of warm air (60–63 °C/140–145 °F) that circulates throughout the basket, evaporating traces of solvent left after the spin cycle. The air temperature is controlled to prevent heat damage to the garments. The exhausted warm air from the machine then passes through a chiller unit where solvent vapors are condensed and returned to the distilled solvent tank. Modern dry cleaning machines use a closed-loop system in which the chilled air is reheated and recirculated. This results in high solvent recovery rates and reduced air pollution. In the early days of dry cleaning, large amounts of perchloroethylene were vented to the atmosphere because it was regarded as cheap and believed to be harmless.

After the drying cycle is complete, a deodorizing (aeration) cycle cools the garments and removes further traces of solvent by circulating cool outside air over the garments and then through a vapor recovery filter made from activated carbon and polymer resins. After the aeration cycle, the garments are clean and ready for pressing and finishing.

Solvent reprocessing

Файл:Pelzreinigung - Multimatic II a.jpg
Solvent reprocessing machinery (Germany)
Файл:Saver40.jpg
A Firbimatic Saver Series. This machine uses activated clay filtration instead of distillation. It uses much less energy than conventional methods.

Working solvent from the washing chamber passes through several filtration steps before it is returned to the washing chamber. The first step is a button trap, which prevents small objects such as lint, fasteners, buttons, and coins from entering the solvent pump.

Over time, a thin layer of filter cake (called "muck") accumulates on the lint filter. The muck is removed regularly (commonly once per day) and then processed to recover solvent trapped in the muck. Many machines use "spin disk filters", which remove the muck from the filter by centrifugal force while it is back washed with solvent.

After the lint filter, the solvent passes through an absorptive cartridge filter. This filter, which contains activated clays and activated charcoal, removes fine insoluble soil and non-volatile residues, along with dyes from the solvent. Finally, the solvent passes through a polishing filter, which removes any contaminants not previously removed. The clean solvent is then returned to the working solvent tank.

"Cooked powder residue" is the name for the waste material generated by cooking down or distilling muck. It will contain residual solvent, powdered filter material (diatomite), carbon, non-volatile residues, lint, dyes, grease, soils, and water. The waste sludge or solid residue from the still contains residual solvent, water, soils, carbon, and other non-volatile residues. Used filters are another form of waste, as is waste water, which are also subject to regulation by the United States Environmental Protection Agency (US EPA) and local authorities.[6]

To enhance cleaning power, small amounts of detergent (0.5–1.5%) are added to the working solvent, and are essential to its functionality. These detergents emulsify hydrophobic soils and keep soil from redepositing on garments. Depending on the machine's design, either an anionic or a cationic detergent is used.

Garment compatibility

Garments should be carefully checked for foreign objects before being placed in the machine. Items such as plastic pens may dissolve in the solvent bath, damaging the entire batch of textiles. Certain textile dyes are "loose" and will shed dye during solvent immersion.

Fragile items, such as feather bedspreads or tasseled rugs or hangings, may be protected by enclosing them in a loose mesh bag. The density of perchloroethylene is around 1.62 g/cm3 at room temperature (62% heavier than water), and the sheer weight of absorbed solvent may cause the textile to fail under typical forces during the spin extraction cycle, unless the mesh bag provides mechanical support.

Not all stains can be removed by dry cleaning. Some need to be treated with spotting solventsШаблон:Sndsometimes by steam jet or by soaking in special stain-remover liquidsШаблон:Sndbefore garments are washed or dry cleaned. Also, garments which have been stored in soiled condition for a long time are difficult to bring back to their original color and texture, since irreversible chemical reactions (such as oxidation) may occur over time.

Care symbols

The international GINETEX laundry symbol for dry cleaning is a circle. It may have the letter "P" inside it to indicate perchloroethylene solvent, or the letter "F" to indicate a flammable solvent (German: Feuergefährliches Schwerbenzin). A bar underneath the circle indicates that only mild cleaning processes are recommended. A crossed-out empty circle indicates that an item should not be dry cleaned at all.[7]

Solvents used

Perchloroethylene

Файл:Tetrachloroethylene.svg
Perchloroethylene is the main solvent used in dry cleaning

Perchloroethylene (PCE or "perc", tetrachloroethylene) has been in use since the 1930s. PCE is the most common solvent, the "standard" for cleaning performance. It is a highly effective cleaning solvent, and it is thermally stable, recyclable, and has low toxicity and a pleasant smell. PCE is recycled by distillation at its boiling point (121 °C).

The solvent can cause color bleeding/loss, especially at higher temperatures. In some cases it may damage special trims, buttons and beads on some garments. It is better for oil-based stains (which account for about 10% of stains)Шаблон:Citation needed than more common water-soluble stains (coffee, wine, blood, etc.).

The toxicity of perchloroethylene is "moderate to low" and "reports of human injury are uncommon despite its wide usage in dry cleaning and degreasing".[8] Tetrachloroethylene is classified as "probably carcinogenic to humans" (Group 2A) by the International Agency for Research on Cancer (IARC). There is a possibility that it is carcinogenic to humans, but the evidence is limited since most of the evaluated dry-cleaners had heavy smoking and drinking habits.[9] The exposure to tetrachloroethylene in a typical dry cleaner is considered far below the levels required to cause any risk.[10]

It is estimated that 50% to 70% of dry cleaners in the US were using perc Шаблон:As of.[6] Alternative solvents are available, but these may require major changes in equipment, procedures, and operator training.[6] Flammable solvents may require installation of expensive fire-suppression systems.[6]

Because perc has been the longtime de facto standard solvent for dry cleaning, there is considerable interest in finding a "drop-in" substitute solvent which could be used with minimal changes to existing equipment and procedures.[6]

High flash hydrocarbons

Файл:Union K Series Dry Cleaning Machine.jpg
A modern dry cleaning machine for use with various solvents

High flash hydrocarbons, characterized as having a flash point higher than Шаблон:Convert, are considered to be safer than traditional hydrocarbon solvents.[6]Шаблон:Rp Examples include Exxon-Mobil's DF-2000 or Chevron Phillips' EcoSolv, and Pure Dry. These petroleum-based solvents are less aggressive but also less effective than PCE. Although hydrocarbons are combustible, risk of fire or explosion can be minimized when they are used properly; a fire-suppression system may also be required. Hydrocarbons are considered to be volatile organic compound (VOC) pollutants.[6]Шаблон:Rp Hydrocarbons retain about 10-12% of the market.Шаблон:Citation needed

Trichloroethylene

Trichloroethylene (TCE) is more aggressive than PCE but is very rarely used today. With superior degreasing properties, it was often used for industrial workwear/overalls cleaning in the past. It is chemically related to tetrachloroethylene. TCE is classified as carcinogenic to humans by the United States Environmental Protection Agency.[11]

Supercritical Шаблон:CO2

[[Supercritical CO2|Supercritical Шаблон:CO2]] is an alternative to PCE; however, it is inferior in removing some forms of grime.[12][6] Additive surfactants improve the efficacy of Шаблон:CO2.[13] Carbon dioxide is almost entirely nontoxic (but is an asphyxiant risk in high concentrations).[6]

The Шаблон:CO2 dry cleaning process involves charging a sealed chamber which has been loaded with clothes, using gaseous carbon dioxide from a storage vessel to approximately Шаблон:Cvt of pressure. This step in the process is initiated as a precaution to avoid thermal shock to the cleaning chamber. Liquid carbon dioxide is then pumped into the cleaning chamber from a separate storage vessel by a hydraulic or electrically-driven pump (which preferably has dual pistons). The pump increases the pressure of the liquid carbon dioxide to approximately Шаблон:Cvt. A separate sub-cooler reduces the temperature of the carbon dioxide by Шаблон:Convert below the boiling point, in an effort to prevent cavitation which could lead to premature degradation of the pump.[14]

Consumer Reports rated supercritical Шаблон:CO2 superior to conventional methods, but the Drycleaning and Laundry Institute commented on its "fairly low cleaning ability" in a 2007 report.[15] Supercritical Шаблон:CO2 is a mild solvent overall, which lowers its ability to aggressively attack stains.

One deficiency with supercritical Шаблон:CO2 is that its electrical conductivity is low. As mentioned in the Mechanisms section, dry cleaning utilizes both chemical and mechanical properties to remove stains. When solvent interacts with the fabric's surface, the friction dislocates dirt. At the same time, the friction also builds up an electrical charge. Fabrics are very poor conductors, but usually this build-up of static electricity is dissipated through the solvent. This discharge does not occur in liquid carbon dioxide, and the build-up of an electrical charge on the surface of the fabric attracts the dirt back on to the surface, diminishing the cleaning efficiency.Шаблон:Citation needed

To compensate for the poor solubility and conductivity of supercritical carbon dioxide, research has focused on additives. For increased solubility, 2-propanol has shown increased cleaning effects for liquid carbon dioxide, as it increases the ability of the solvent to dissolve polar compounds.[16]

Machinery for use of supercritical Шаблон:CO2 is expensiveШаблон:Sndup to $90,000 more than a PCE machine, making affordability difficult for small businesses. Some cleaners with these machines keep traditional machines on-site for more-heavily-soiled textiles, but others find plant-derived enzymes to be equally effective and more environmentally sustainable.

Other solvents: niche, emerging, etc.

For decades, efforts have been made to replace PCE. These alternatives have not proven popular thus far:

  • Glycol ethers (also called "propylene glycol ethers") are a class of organic solvents which were introduced in the 1990s as an alternative to perc.[6]Шаблон:Rp These solvent mixes are flammable, but are considered comparable to high flash hydrocarbons in fire hazard. They are not considered to be carcinogenic, and have relatively benign persistence and environmental effects.[6]Шаблон:Rp
  • Decamethylcyclopentasiloxane ("siloxane" or "liquid silicone", trademarked Siloxane D5),[6]Шаблон:Rp was initially popularized by GreenEarth Cleaning.[17] It is more expensive than PCE.[6] It is marketed as an eco-friendly product that degrades quickly in the environment, but is controlled in the European Union due to its persistent, bioaccumulative and toxic characteristics.[18]
  • Dibutoxymethane (formaldehyde dibutyl acetal, also referred to as "butylal", loosely referred to as "acetal", and trademarked as SolvonK4)[6]Шаблон:Rp is a bipolar solvent that removes water-based stains and oil-based stains.[19][6] Because the solvent is relatively new in cleaning applications, there has been relatively little specific research into health and environmental effects.[6]Шаблон:Rp
  • Brominated solvents (n-propyl bromide, Fabrisolv, DrySolv) are solvents with higher KB-values than PCE. This allows faster cleaning, but can damage some synthetic beads and sequins if not used correctly. Healthwise, there are reported risks associated with nPB such as numbness of nerves.[20] Environmentally, it is approved by the US EPA. It is among the more expensive solvents, but it has advantages of faster cleaning, lower temperatures, and quick drying times. In 2016, the state of Massachusetts listed the solvent as a "Higher Hazard Substance" due to increased concerns about its health and environmental effects.[21]

Historical

See also

Notes

Шаблон:Notelist

References

Шаблон:Reflist

External links

Шаблон:Laundry navbox Шаблон:Authority control