Английская Википедия:Ducati 125 Scrambler

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:Use dmy dates Шаблон:Use British English Шаблон:Infobox motorcycle The Ducati 125 Scrambler is an on/off road Шаблон:Convert single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati in 1971 and 1972. Although Ducati had stopped production of the 'narrow case' singles in 1967, the Scrambler used a narrow case engine made by MotoTrans in Spain. The model was not a sales success with less than 200 sold worldwideШаблон:Sfn and was soon taken out of production.Шаблон:SfnШаблон:Sfn

Technical details

Engine and transmission

The Ducati OHC singles had been designed by Fabio Taglioni. The initial engines, known as 'narrow case', were superseded by the improved 'wide case' engines in 1967, although the narrow case engines continued to be manufactured by MotoTrans in Spain. The smallest wide case engine was 250 cc and the new 125 Scrambler was fitted with a Spanish made engine.Шаблон:Sfn The single cylinder bevel drive OHC engine was of a vertically spilt unit constructionШаблон:Sfn and had alloy head and alloy barrels with austenitic liners.Шаблон:Sfn Ball bearings were used in the main bearings and roller bearings for the big end.Шаблон:Sfn Hairspring valve springs were used to close the valves.Шаблон:Sfn Bore and stroke were Шаблон:Convert giving a displacement of Шаблон:Convert. Compression ratio was 8.5:1. and claimed power output was Шаблон:Convert @ 8,000 rpm,Шаблон:Sfn giving a top speed of Шаблон:Convert.Шаблон:Sfn

Fuel was delivered by a 20 mm Spanish built Amal Monobloc carburettor.Шаблон:Sfn Wet sump lubrication was usedШаблон:Sfn and ignition was by battery and coil.Шаблон:Sfn

Primary drive was by helical gears to a multi-plate wet clutchШаблон:Sfn to a 5 speed gearbox.Шаблон:Sfn Chain drive took power to the rear wheel.Шаблон:Sfn

Cycle parts

Unlike other OHC models, the 125 Scrambler used a full duplex cradle frame.Шаблон:Sfn Rear suspension was by swinging arm with twin Marzocchi shock absorbers. At the front Marzocchi telescopic forks were fitted.Шаблон:Sfn Brakes were drums, the front being Шаблон:Convert diameter front and Шаблон:Convert rear.Шаблон:Sfn Wire wheels were fitted with a 250x19 tyre front and 350x18 rear.Шаблон:Sfn

References

Шаблон:Reflist

Bibliography

Шаблон:Ducati