Английская Википедия:Ducati 250 Scrambler
Шаблон:Short description Шаблон:Use dmy dates Шаблон:Use British English Шаблон:Infobox motorcycle The Ducati 250 Scrambler, known in Europe as the Ducati 250 SCRШаблон:Sfn is an on/off road Шаблон:Convert single cylinder bevel drive SOHC motorcycle produced by the Italian manufacturer Ducati from 1962 to 1974. Originally produced for the American Market at the request of the US importers, Berliner Motor Corporation, the model was offered in Europe from 1968.Шаблон:Sfn Total production was around 12,000 machines.Шаблон:Sfn
The model was also produced under licence in Spain by MotoTrans from 1972 to 1974.Шаблон:Sfn
History
American importer Joe Berliner's brother Michael had converted a 250 Ducati to a flat-tracker, and Berliner asked Ducati to produce a similar machine with lights.Шаблон:Sfn Introduced in 1962, the 250 Scrambler used a tuned version of the 'narrow case' Monza engine with higher compression ratio, sportier cam and larger carburettor. It was advertised as a 4-in-1 machine, with a change of handlebars and exhaust the bike could be used for road racing, short track or enduro.Шаблон:Sfn The bike came with a competition kit consisting of spare cables, different sprockets and solid struts to replace the rear shock absorbers for short-track use. A silencer was included for road use.Шаблон:Sfn Ugnition was by flywheel magneto and no battery was fitted.Шаблон:SfnШаблон:Sfn
In 1964 the Scrambler received a styling update with a different seatШаблон:Sfn and Diana style tank.Шаблон:Sfn A five speed gearbox was introduced in 1965.Шаблон:Sfn In 1966 a skid plate, high level exhaust,Шаблон:Sfn better lightsШаблон:Sfn and a battery were fitted.Шаблон:Sfn Stronger front forks and 25% softer rear shocks were also fitted.Шаблон:Sfn
The 'wide case' engine was used from 1968 and this was regarded as the smoothest of the Ducati Scramblers.Шаблон:Sfn Staying was updated with a new tank with chrome panels, higher, wider bars and a short silencer.Шаблон:Sfn
A square slide Dell'Orto VHB carb was fitted in 1970 and the size reduced to 26 mm.Шаблон:Sfn Few Italian-made models were imported to the UK and US during 1970-71 as the importers (Berliner in the US and Vic Camp in the UK) were in dispute with the factory over prices. During this period Spanish-built MotoTrans models were imported.Шаблон:Sfn
From 1973 Spanish MotoTrans engines were fitted,Шаблон:Sfn along with electronic ignition.Шаблон:Sfn
The factory ceased production of OHC singles in 1974. The remaining stocks were purchased by the then British importer Coburn & Hughes, who continued to sell them until early 1976. These last 250 Scramblers were produced under licence by the Spanish company MotoTrans.Шаблон:Sfn
Technical details
Engine and transmission
The single cylinder bevel drive OHC engine was of a vertically spilt unit constructionШаблон:Sfn and had alloy head and alloy barrels with austenitic liners.Шаблон:Sfn Ball bearings were used in the main bearings and roller bearings for the big end.Шаблон:Sfn Hairspring valve springs were used to close the valves.Шаблон:Sfn Bore and stroke were Шаблон:Convert giving a displacement of Шаблон:Convert. Compression ratio was 9.2:1.Шаблон:Sfn
The 'wide case' engine was introduced in 1968. Although the specifications were similar to the 'narrow case' engine, the new engine had a stronger bottom end with bigger main bearings and big end. Capacity of the wet sump was increased from 4 to 5.5 pintsШаблон:Sfn and the kickstart mechanism has been upgraded from the earlier models.Шаблон:Sfn
Fuel was supplied by a 27 mm Dell'Orto SSI carburettor, which was increased to 29 mm bore in 1967. With the introduction of the wide case engine in 1968 the 27 mm carb was used. A 26 mm square slide Dell'Orto VHB carb was fitted from 1970.Шаблон:Sfn 1973/4 models fitted with MotoTrans engines used a 26 mm Spanish-made Amal carb.Шаблон:Sfn
Ignition was initially by flywheel magneto. This was changed to battery and coil in 1968Шаблон:Sfn and electronic ignition was fitted in 1973.Шаблон:Sfn Power output varied from Шаблон:Convert to Шаблон:ConvertШаблон:Sfn dependent on year and specification.
Primary drive was by helical gears to a multi-plate wet clutch.Шаблон:Sfn A 4 speed gearbox was initially fitted, with a 5 speed box being fitted from 1964.Шаблон:Sfn Chain drive took power to the rear wheel.Шаблон:Sfn
Cycle parts
The single cradle frame used the engine as a stressed member.Шаблон:Sfn When the wide case engine was introduced the frame was modified for the wider rear mountings and twin rear loops were added which made the frame stronger and stiffer.Шаблон:Sfn
Rear suspension was by swinging arm with twin 3-way adjustable Marzocchi shock absorbers. At the front Шаблон:Convert telescopic forks were fitted.Шаблон:Sfn Brakes were drums, the front being Шаблон:Convert diameter front and Шаблон:Convert rear. Wire wheels were used with 300x19 front and 350x19 rear tyres. Tyres were changed to 350x19 and 400x18 in 1966.Шаблон:Sfn
References
Bibliography
- Шаблон:Cite book
- Шаблон:Cite book
- Шаблон:Cite magazine
- Шаблон:Cite web
- Шаблон:Cite book
- Шаблон:Cite book
- Шаблон:Cite magazine
- Шаблон:Cite web
- Шаблон:Cite web
- Шаблон:Cite web
- Шаблон:Cite web
- Шаблон:Cite journal
External links