Английская Википедия:Förster resonance energy transfer

Jablonski diagram of FRET with typical timescales indicated. The black dashed line indicates a virtual photon.

Förster resonance energy transfer (FRET), fluorescence resonance energy transfer, resonance energy transfer (RET) or electronic energy transfer (EET) is a mechanism describing energy transfer between two light-sensitive molecules (chromophores).^[1] A donor chromophore, initially in its electronic excited state, may transfer energy to an acceptor chromophore through nonradiative dipole–dipole coupling.^[2] The efficiency of this energy transfer is inversely proportional to the sixth power of the distance between donor and acceptor, making FRET extremely sensitive to small changes in distance.^[3]^[4]

Measurements of FRET efficiency can be used to determine if two fluorophores are within a certain distance of each other.^[5] Such measurements are used as a research tool in fields including biology and chemistry.

FRET is analogous to near-field communication, in that the radius of interaction is much smaller than the wavelength of light emitted. In the near-field region, the excited chromophore emits a virtual photon that is instantly absorbed by a receiving chromophore. These virtual photons are undetectable, since their existence violates the conservation of energy and momentum, and hence FRET is known as a radiationless mechanism. Quantum electrodynamical calculations have been used to determine that radiationless (FRET) and radiative energy transfer are the short- and long-range asymptotes of a single unified mechanism.^[6]^[7]^[8]

Terminology

Файл:Concept of FRET.png

Cartoon diagram of the concept of Förster resonance energy transfer (FRET).

Förster resonance energy transfer is named after the German scientist Theodor Förster.^[9] When both chromophores are fluorescent, the term "fluorescence resonance energy transfer" is often used instead, although the energy is not actually transferred by fluorescence.^[10]^[11] In order to avoid an erroneous interpretation of the phenomenon that is always a nonradiative transfer of energy (even when occurring between two fluorescent chromophores), the name "Förster resonance energy transfer" is preferred to "fluorescence resonance energy transfer"; however, the latter enjoys common usage in scientific literature.^[12] FRET is not restricted to fluorescence and occurs in connection with phosphorescence as well.^[10]

Theoretical basis

The FRET efficiency (<math>E</math>) is the quantum yield of the energy-transfer transition, i.e. the probability of energy-transfer event occurring per donor excitation event:^[13]

where <math>k_f</math> the radiative decay rate of the donor, <math>k_\text{ET}</math> is the rate of energy transfer, and <math>k_i</math> the rates of any other de-excitation pathways excluding energy transfers to other acceptors.^[14]^[15]

The FRET efficiency depends on many physical parameters^[16] that can be grouped as: 1) the distance between the donor and the acceptor (typically in the range of 1–10 nm), 2) the spectral overlap of the donor emission spectrum and the acceptor absorption spectrum, and 3) the relative orientation of the donor emission dipole moment and the acceptor absorption dipole moment.

<math>E</math> depends on the donor-to-acceptor separation distance <math>r</math> with an inverse 6th-power law due to the dipole–dipole coupling mechanism:

with <math>R_0</math> being the Förster distance of this pair of donor and acceptor, i.e. the distance at which the energy transfer efficiency is 50%.^[14] The Förster distance depends on the overlap integral of the donor emission spectrum with the acceptor absorption spectrum and their mutual molecular orientation as expressed by the following equation all in SI units:^[17]^[18]^[19]

<math> {R_0}^6 = \frac{2.07}{128 \, \pi^5 \, N_A} \, \frac{\kappa^2 \,Q_D}{n^4} J </math>

where <math>Q_\text{D}</math> is the fluorescence quantum yield of the donor in the absence of the acceptor, <math>\kappa^2</math> is the dipole orientation factor, <math>n</math> is the refractive index of the medium, <math>N_\text{A}</math> is the Avogadro constant, and <math>J</math> is the spectral overlap integral calculated as

<math> J = \frac{\int f_\text{D}(\lambda) \epsilon_\text{A}(\lambda) \lambda^4 \, d\lambda}{\int f_\text{D}(\lambda) \, d\lambda} = \int \overline{f_\text{D}}(\lambda) \epsilon_\text{A}(\lambda) \lambda^4 \, d\lambda,</math>

where <math>f_\text{D}</math> is the donor emission spectrum, <math>\overline{f_\text{D}}</math> is the donor emission spectrum normalized to an area of 1, and <math>\epsilon_\text{A}</math> is the acceptor molar extinction coefficient, normally obtained from an absorption spectrum.^[20] The orientation factor Шаблон:Mvar is given by

<math>\kappa = \hat\mu_\text{A} \cdot \hat\mu_\text{D} - 3 (\hat\mu_\text{D} \cdot \hat R) (\hat\mu_\text{A} \cdot \hat R), </math>

where <math>\hat\mu_i</math> denotes the normalized transition dipole moment of the respective fluorophore, and <math>\hat R</math> denotes the normalized inter-fluorophore displacement.^[21] <math>\kappa^2</math> = 2/3 is often assumed. This value is obtained when both dyes are freely rotating and can be considered to be isotropically oriented during the excited-state lifetime. If either dye is fixed or not free to rotate, then <math>\kappa^2</math> = 2/3 will not be a valid assumption. In most cases, however, even modest reorientation of the dyes results in enough orientational averaging that <math>\kappa^2</math> = 2/3 does not result in a large error in the estimated energy-transfer distance due to the sixth-power dependence of <math>R_0</math> on <math>\kappa^2</math>. Even when <math>\kappa^2</math> is quite different from 2/3, the error can be associated with a shift in <math>R_0</math>, and thus determinations of changes in relative distance for a particular system are still valid. Fluorescent proteins do not reorient on a timescale that is faster than their fluorescence lifetime. In this case 0 ≤ <math>\kappa^2</math> ≤ 4.^[20]

The units of the data are usually not in SI units. Using the original units to calculate the Förster distance is often more convenient. For example, the wavelength is often in unit nm and the extinction coefficient is often in unit <math>M^{-1} cm^{-1}</math>, where <math>M</math> is concentration <math>mol/L</math>. <math>J</math> obtained from these units will have unit <math>M^{-1} cm^{-1} nm^4</math>. To use unit Å (<math>10^{-10}m</math>) for the <math> R_0</math>, the equation is adjusted to^[17]^[22]^[23]^[24]

<math> {R_0}^6 = 8.785 \times 10^{-5} \frac{\kappa^2 \,Q_D}{n^4} J </math> (Å<math>^6</math>)

For time-dependent analyses of FRET, the rate of energy transfer (<math>k_\text{ET}</math>) can be used directly instead:^[17]

where <math>\tau_D</math> is the donor's fluorescence lifetime in the absence of the acceptor.

The FRET efficiency relates to the quantum yield and the fluorescence lifetime of the donor molecule as follows:^[25]

where <math>\tau_\text{D}'</math> and <math>\tau_\text{D}</math> are the donor fluorescence lifetimes in the presence and absence of an acceptor respectively, or as

where <math>F_\text{D}'</math> and <math>F_\text{D}</math> are the donor fluorescence intensities with and without an acceptor respectively.

Experimental confirmation of the FRET theory

The inverse sixth-power distance dependence of Förster resonance energy transfer was experimentally confirmed by Wilchek, Edelhoch and Brand^[26] using tryptophyl peptides. Stryer, Haugland and Yguerabide^[27]Шаблон:Citation needed^[28] also experimentally demonstrated the theoretical dependence of Förster resonance energy transfer on the overlap integral by using a fused indolosteroid as a donor and a ketone as an acceptor. Calculations on FRET distances of some example dye-pairs can be found here.^[22]^[24] However, a lot of contradictions of special experiments with the theory was observed under complicated environment when the orientations and quantum yields of the molecules are difficult to estimate.^[29]

Methods to measure FRET efficiency

In fluorescence microscopy, fluorescence confocal laser scanning microscopy, as well as in molecular biology, FRET is a useful tool to quantify molecular dynamics in biophysics and biochemistry, such as protein-protein interactions, protein–DNA interactions, and protein conformational changes. For monitoring the complex formation between two molecules, one of them is labeled with a donor and the other with an acceptor. The FRET efficiency is measured and used to identify interactions between the labeled complexes. There are several ways of measuring the FRET efficiency by monitoring changes in the fluorescence emitted by the donor or the acceptor.^[30]

Sensitized emission

One method of measuring FRET efficiency is to measure the variation in acceptor emission intensity.^[18] When the donor and acceptor are in proximity (1–10 nm) due to the interaction of the two molecules, the acceptor emission will increase because of the intermolecular FRET from the donor to the acceptor. For monitoring protein conformational changes, the target protein is labeled with a donor and an acceptor at two loci. When a twist or bend of the protein brings the change in the distance or relative orientation of the donor and acceptor, FRET change is observed. If a molecular interaction or a protein conformational change is dependent on ligand binding, this FRET technique is applicable to fluorescent indicators for the ligand detection.

Photobleaching FRET

FRET efficiencies can also be inferred from the photobleaching rates of the donor in the presence and absence of an acceptor.^[18] This method can be performed on most fluorescence microscopes; one simply shines the excitation light (of a frequency that will excite the donor but not the acceptor significantly) on specimens with and without the acceptor fluorophore and monitors the donor fluorescence (typically separated from acceptor fluorescence using a bandpass filter) over time. The timescale is that of photobleaching, which is seconds to minutes, with fluorescence in each curve being given by

<math>\text{background} + \text{constant} \cdot e^{-\text{time}/\tau_\text{pb}},</math>

where <math>\tau_\text{pb}</math> is the photobleaching decay time constant and depends on whether the acceptor is present or not. Since photobleaching consists in the permanent inactivation of excited fluorophores, resonance energy transfer from an excited donor to an acceptor fluorophore prevents the photobleaching of that donor fluorophore, and thus high FRET efficiency leads to a longer photobleaching decay time constant:

where <math>\tau_\text{pb}'</math> and <math>\tau_\text{pb}</math> are the photobleaching decay time constants of the donor in the presence and in the absence of the acceptor respectively. (Notice that the fraction is the reciprocal of that used for lifetime measurements).

This technique was introduced by Jovin in 1989.^[31] Its use of an entire curve of points to extract the time constants can give it accuracy advantages over the other methods. Also, the fact that time measurements are over seconds rather than nanoseconds makes it easier than fluorescence lifetime measurements, and because photobleaching decay rates do not generally depend on donor concentration (unless acceptor saturation is an issue), the careful control of concentrations needed for intensity measurements is not needed. It is, however, important to keep the illumination the same for the with- and without-acceptor measurements, as photobleaching increases markedly with more intense incident light.

Lifetime measurements

FRET efficiency can also be determined from the change in the fluorescence lifetime of the donor.^[18] The lifetime of the donor will decrease in the presence of the acceptor. Lifetime measurements of the FRET-donor are used in fluorescence-lifetime imaging microscopy (FLIM).

Single-molecule FRET (smFRET)

Шаблон:Main article

smFRET is a group of methods using various microscopic techniques to measure a pair of donor and acceptor fluorophores that are excited and detected at the single molecule level. In contrast to "ensemble FRET" or "bulk FRET" which provides the FRET signal of a high number of molecules, single-molecule FRET is able to resolve the FRET signal of each individual molecule. The variation of the smFRET signal is useful to reveal kinetic information that an ensemble measurement cannot provide, especially when the system is under equilibrium. Heterogeneity among different molecules can also be observed. This method has been applied in many measurements of biomolecular dynamics such as DNA/RNA/protein folding/unfolding and other conformational changes, and intermolecular dynamics such as reaction, binding, adsorption, and desorption that are particularly useful in chemical sensing, bioassays, and biosensing.

Fluorophores used for FRET

Файл:Proteolytic cleavage of a Dual-GFP fusion FRET-pair.png

If the linker is intact, excitation at the absorbance wavelength of CFP (414 nm) causes emission by YFP (525 nm) due to FRET. If the linker is cleaved by a protease, FRET is abolished and emission is at the CFP wavelength (475 nm).

CFP-YFP pairs

One common pair fluorophores for biological use is a cyan fluorescent protein (CFP) – yellow fluorescent protein (YFP) pair.^[32] Both are color variants of green fluorescent protein (GFP). Labeling with organic fluorescent dyes requires purification, chemical modification, and intracellular injection of a host protein. GFP variants can be attached to a host protein by genetic engineering which can be more convenient. Additionally, a fusion of CFP and YFP ("tandem-dimer") linked by a protease cleavage sequence can be used as a cleavage assay.^[33]

BRET

A limitation of FRET performed with fluorophore donors is the requirement for external illumination to initiate the fluorescence transfer, which can lead to background noise in the results from direct excitation of the acceptor or to photobleaching. To avoid this drawback, bioluminescence resonance energy transfer (or BRET) has been developed.^[34]^[35] This technique uses a bioluminescent luciferase (typically the luciferase from Renilla reniformis) rather than CFP to produce an initial photon emission compatible with YFP.

BRET has also been implemented using a different luciferase enzyme, engineered from the deep-sea shrimp Oplophorus gracilirostris. This luciferase is smaller (19 kD) and brighter than the more commonly used luciferase from Renilla reniformis,^[36]^[37]^[38]^[39] and has been named NanoLuc^[40] or NanoKAZ.^[41] Promega has developed a patented substrate for NanoLuc called furimazine,^[42]^[40] though other valuables coelenterazine substrates for NanoLuc have also been published.^[41]^[43] A split-protein version of NanoLuc developed by Promega^[44] has also been used as a BRET donor in experiments measuring protein-protein interactions.^[45]

Homo-FRET

In general, "FRET" refers to situations where the donor and acceptor proteins (or "fluorophores") are of two different types. In many biological situations, however, researchers might need to examine the interactions between two, or more, proteins of the same type—or indeed the same protein with itself, for example if the protein folds or forms part of a polymer chain of proteins^[46] or for other questions of quantification in biological cells^[47] or in vitro experiments.^[48]

Obviously, spectral differences will not be the tool used to detect and measure FRET, as both the acceptor and donor protein emit light with the same wavelengths. Yet researchers can detect differences in the polarisation between the light which excites the fluorophores and the light which is emitted, in a technique called FRET anisotropy imaging; the level of quantified anisotropy (difference in polarisation between the excitation and emission beams) then becomes an indicative guide to how many FRET events have happened.^[49]

In the field of nano-photonics, FRET can be detrimental if it funnels excitonic energy to defect sites, but it is also essential to charge collection in organic and quantum-dot-sensitized solar cells, and various FRET-enabled strategies have been proposed for different opto-electronic devices. It is then essential to understand how isolated nano-emitters behave when they are stacked in a dense layer. Nanoplatelets are especially promising candidates for strong homo-FRET exciton diffusion because of their strong in-plane dipole coupling and low Stokes shift.^[50] Fluorescence microscopy study of such single chains demonstrated that energy transfer by FRET between neighbor platelets causes energy to diffuse over a typical 500-nm length (about 80 nano emitters), and the transfer time between platelets is on the order of 1 ps.^[51]

Others

Various compounds beside fluorescent proteins.^[52]

Applications

The applications of fluorescence resonance energy transfer (FRET) have expanded tremendously in the last 25 years, and the technique has become a staple in many biological and biophysical fields. FRET can be used as a spectroscopic ruler to measure distance and detect molecular interactions in a number of systems and has applications in biology and biochemistry.^[28]^[53]

Proteins

FRET is often used to detect and track interactions between proteins.^[54]^[55]^[56]^[57] Additionally, FRET can be used to measure distances between domains in a single protein by tagging different regions of the protein with fluorophores and measuring emission to determine distance. This provides information about protein conformation, including secondary structures and protein folding.^[58]^[59] This extends to tracking functional changes in protein structure, such as conformational changes associated with myosin activity.^[60] Applied in vivo, FRET has been used to detect the location and interactions of cellular structures including integrins and membrane proteins.^[61]

Membranes

FRET can be used to observe membrane fluidity, movement and dispersal of membrane proteins, membrane lipid-protein and protein-protein interactions, and successful mixing of different membranes.^[62] FRET is also used to study formation and properties of membrane domains and lipid rafts in cell membranes^[63] and to determine surface density in membranes.^[64]

Chemosensor

Файл:FRET probe for the detection of Cd2+.gif

FRET-based probe that activates upon interaction with Cd2+

FRET-based probes can detect the presence of various molecules: the probe's structure is affected by small molecule binding or activity, which can turn the FRET system on or off. This is often used to detect anions, cations, small uncharged molecules, and some larger biomacromolecules as well. Similarly, FRET systems have been designed to detect changes in the cellular environment due to such factors as pH, hypoxia, or mitochondrial membrane potential.^[65]

Signaling pathways

Another use for FRET is in the study of metabolic or signaling pathways.^[66] For example, FRET and BRET have been used in various experiments to characterize G-protein coupled receptor activation and consequent signaling mechanisms.^[67] Other examples include the use of FRET to analyze such diverse processes as bacterial chemotaxis^[68] and caspase activity in apoptosis.^[69]

Proteins and nucleotides folding kinetics

Proteins, DNAs, RNAs, and other polymer folding dynamics have been measured using FRET. Usually, these systems are under equilibrium whose kinetics is hidden. However, they can be measured by measuring single-molecule FRET with proper placement of the acceptor and donor dyes on the molecules. See single-molecule FRET for a more detailed description.

Other applications

In addition to common uses previously mentioned, FRET and BRET are also effective in the study of biochemical reaction kinetics.^[70] FRET is increasingly used for monitoring pH dependent assembly and disassembly and is valuable in the analysis of nucleic acids encapsulation.^[71]^[72]^[73]^[74] This technique can be used to determine factors affecting various types of nanoparticle formation^[75]^[76] as well as the mechanisms and effects of nanomedicines.^[77]

Other methods

A different, but related, mechanism is Dexter electron transfer.

An alternative method to detecting protein–protein proximity is the bimolecular fluorescence complementation (BiFC), where two parts of a fluorescent protein are each fused to other proteins. When these two parts meet, they form a fluorophore on a timescale of minutes or hours.^[78]

References

Шаблон:Reflist

External links

Шаблон:YouTube
FRET Imaging (Tutorial of Becker & Hickl, website)

[1] Шаблон:Cite book

[2] Шаблон:Cite book

[3] Шаблон:Cite book

[4] Шаблон:Cite journal

[5] Шаблон:Cite book

[6] Шаблон:Cite journal

[7] Шаблон:Cite journal

[8] Шаблон:Cite journal

[9] Шаблон:Cite journal

[Wiley-VCH-10] 10,0 ^10,1 Шаблон:Cite book

[11] FRET microscopy tutorial from Olympus Шаблон:Webarchive

[12] Шаблон:Cite book

[13] Шаблон:Cite web

[SchaufeleDemarcoDay2005p72-94-14] 14,0 ^14,1 Шаблон:Cite book

[15] Шаблон:Cite journal

[16] Шаблон:Cite journal

[forster1965p93-137-17] 17,0 ^17,1 ^17,2 Шаблон:Cite book

[Clegg2009p1-57-18] 18,0 ^18,1 ^18,2 ^18,3 Шаблон:Cite book

[19] ttp://spie.org/samples/PM194.pdf Шаблон:Bare URL PDF

[Demchenko2008-20] 20,0 ^20,1 Шаблон:Cite book

[21] Шаблон:Cite journal

[fpbase-22] 22,0 ^22,1 Шаблон:Cite web

[23] Шаблон:Cite journal

[1994_AnalytBioChem_Wu-24] 24,0 ^24,1 Шаблон:Cite journal

[25] Шаблон:Cite book

[26] Шаблон:Cite journal

[27] Шаблон:Cite book

[Lakowicz-28] 28,0 ^28,1 Шаблон:Cite book

[29] Шаблон:Cite book

[30] Шаблон:Cite web

[31] Шаблон:Cite book

[32] Шаблон:Cite journal

[33] Шаблон:Cite journal

[34] Шаблон:Cite book

[35] Шаблон:Cite journal

[ncbi.nlm.nih.gov-36] Шаблон:Cite journal

[37] Шаблон:Cite journal

[38] Шаблон:Cite journal

[39] Шаблон:Cite journal

[Hall_1848–1857-40] 40,0 ^40,1 Шаблон:Cite journal

[Inouye_23–28-41] 41,0 ^41,1 Шаблон:Cite journal

[42] Шаблон:Cite web

[43] Шаблон:Cite journal

[44] Шаблон:Cite journal

[45] Шаблон:Cite journal

[46] Шаблон:Cite journal

[47] Шаблон:Cite journal

[48] Шаблон:Cite journal

[49] Шаблон:Cite journal

[50] Шаблон:Cite journal

[51] Шаблон:Cite journal

[52] Шаблон:Cite journal

[53] Шаблон:Cite journal

[54] Шаблон:Cite journal

[pmid16288953-55] Шаблон:Cite journal

[pmid1091284-56] Шаблон:Cite journal

[57] Шаблон:Cite journal

[58] Шаблон:Cite journal

[pmid11500853-59] Шаблон:Cite journal

[60] Шаблон:Cite journal

[61] Шаблон:Cite journal

[62] Шаблон:Cite journal

[63] Шаблон:Cite journal

[pmid728398-64] Шаблон:Cite journal

[65] Шаблон:Cite journal

[66] Шаблон:Cite book

[67] Шаблон:Cite journal

[68] Шаблон:Cite book

[69] Шаблон:Cite journal

[70] Шаблон:Cite journal

[71] Шаблон:Cite journal

[72] Шаблон:Cite journal

[73] Шаблон:Cite journal

[74] Шаблон:Cite journal

[pmid28112478-75] Шаблон:Cite journal

[76] Шаблон:Cite journal

[77] Шаблон:Cite journal

[pmid11983170-78] Шаблон:Cite journal

[1]

[2]

[3]

[4]

[5]

[6]

[7]

[8]

[9]

[10]

[11]

[12]

[13]

[14]

[15]

[16]

[17]

[18]

[19]

[20]

[21]

[22]

[23]

[24]

[25]

[26]

[27]

[28]

[29]

[30]

[31]

[32]

[33]

[34]

[35]

[36]

[37]

[38]

[39]

[40]

[41]

[42]

[43]

[44]

[45]

[46]

[47]

[48]

[49]

[50]

[51]

[52]

[53]

[54]

[55]

[56]

[57]

[58]

[59]

[60]

[61]

[62]

[63]

[64]

[65]

[66]

[67]

[68]

[69]

[70]

[71]

[72]

[73]

[74]

[75]

[76]

[77]

[78]

Партнерские ресурсы
Криптовалюты	Обмен криптовалют - www.bestchange.ru Криптовалютная биржа CoinEx Криптовалютная биржа Binance HIVE OS - операционная система для майнинга e4pool - Мультивалютный пул для майнинга.
Магазины	AliExpress — глобальная виртуальная (в Интернете) торговая площадка, предоставляющая возможность покупать товары производителей из КНР; computeruniverse.net - Интернет-магазин компьютеров(Промо код 5 Евро на первую покупку:FWWC3ZKQ);
Хостинг	DigitalOcean - американский провайдер облачных инфраструктур, с главным офисом в Нью-Йорке и с центрами обработки данных по всему миру;
Разное	Викиум - Онлайн-тренажер для мозга Like Центр - Центр поддержки и развития предпринимательства. Gamersbay - лучший магазин по бустингу для World of Warcraft. Ноотропы OmniMind N°1 - Усиливает мозговую активность. Повышает мотивацию. Улучшает память. Санкт-Петербургская школа телевидения - это федеральная сеть образовательных центров, которая имеет филиалы в 37 городах России. Lingualeo.com — интерактивный онлайн-сервис для изучения и практики английского языка в увлекательной игровой форме. Junyschool (Джунискул) – международная школа программирования и дизайна для детей и подростков от 5 до 17 лет, где ученики осваивают компьютерную грамотность, развивают алгоритмическое и креативное мышление, изучают основы программирования и компьютерной графики, создают собственные проекты: игры, сайты, программы, приложения, анимации, 3D-модели, монтируют видео. Умназия - Интерактивные онлайн-курсы и тренажеры для развития мышления детей 6-13 лет SkillBox - это один из лидеров российского рынка онлайн-образования. Среди партнеров Skillbox ведущий разработчик сервисного дизайна AIC, медиа-компания Yoola, первое и самое крупное русскоязычное аналитическое агентство Tagline, онлайн-школа дизайна и иллюстрации Bang! Bang! Education, оператор PR-рынка PACO, студия рисования Draw&Go, агентство performance-маркетинга Ingate, scrum-студия Sibirix, имидж-лаборатория Персона. «Нетология» — это университет по подготовке и дополнительному обучению специалистов в области интернет-маркетинга, управления проектами и продуктами, дизайна, Data Science и разработки. В рамках Нетологии студенты получают ценные теоретические знания от лучших экспертов Рунета, выполняют практические задания на отработку полученных навыков, общаются с экспертами и единомышленниками. Познакомиться со всеми продуктами подробнее можно на сайте https://netology.ru, линейка курсов и профессий постоянно обновляется. StudyBay Brazil – это онлайн биржа для португалоговорящих студентов и авторов! Студент получает уникальную работу любого уровня сложности и больше свободного времени, в то время как у автора появляется дополнительный заработок и бесценный опыт. Автор24 — самая большая в России площадка по написанию учебных работ: контрольные и курсовые работы, дипломы, рефераты, решение задач, отчеты по практике, а так же любой другой вид работы. Сервис сотрудничает с более 70 000 авторов. Более 1 000 000 работ уже выполнено. StudyBay – это онлайн биржа для англоязычных студентов и авторов! Студент получает уникальную работу любого уровня сложности и больше свободного времени, в то время как у автора появляется дополнительный заработок и бесценный опыт.