Английская Википедия:Feather River Route

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:For Шаблон:Use mdy dates Шаблон:Infobox rail line The Feather River Route is a rail line that was built and operated by the Western Pacific Railroad. It was constructed between 1906 and 1909, and connects the cities of Oakland, California, and Salt Lake City, Utah. The line was built to compete with the Central Pacific Railroad (and later Southern Pacific Railroad), which at the time held a nearly complete monopoly on Northern California rail service. The route derives its name from its crossing of the Sierra Nevada, where it follows both the North and Middle Forks of the Feather River. The route is famous for its impressive engineering qualities and its considerable scenic value. All of the route is now owned and operated by the Union Pacific Railroad; however, the Union Pacific has transferred significant portions of the route to other lines. The portion still called the Feather River Route by the Union Pacific runs from the California Central Valley to Winnemucca, Nevada and has been divided into three subdivisions named the Sacramento, Canyon and Winnemucca subdivisions.

History

Файл:FeatherRiver.JPG
A rare case of a bridge crossing over another bridge: here, State Route 70 crosses over the railroad bridge, which crosses over the Feather River near Pulga.

Early history

Interest in building a transportation artery through the Feather River Canyon and across the deserts of Nevada and Utah began with the discovery of Beckwourth Pass, in the Sierra Nevada, in 1850. The pass, at Шаблон:Convert in elevation, is the lowest pass through the Sierra Nevada. In the 1860s, Arthur W. Keddie began surveying in the Feather River Canyon, in order to find a suitable route for such an artery. He eventually found such a route, and helped to found the Oroville and Virginia City Railroad Company in 1867 to build a railroad along it. Political pressure from the Central Pacific Railroad, among other factors, led to the end of all construction efforts by 1869.[1]

Throughout the 1870s and 1880s, little progress was made in forming a company to construct the railroad line. Some interest remained, because the proposed route was much less steep and passed through the Sierra Nevada at a point Шаблон:Convert lower than that of the recently finished First transcontinental railroad, owned by the Central Pacific Railroad between Sacramento and Ogden, Utah. The Union Pacific Railroad, which terminated in Ogden at the time, considered building the line multiple times throughout this era to bypass the Central Pacific and access the Pacific Coast on its own. None of these proposals resulted in any level of action, and the idea was widely considered dead by the 1890s.[1]

Шаблон:See also Interest in a line through the Feather River Canyon was renewed in 1900, when the Union Pacific Railroad, then led by E. H. Harriman, took control of the Southern Pacific Railroad. Subsequently, Harriman decided to close off access to the Southern Pacific to all railroads other than the Union Pacific, leaving all other railroads unable to access the Pacific Coast from Salt Lake City. Foremost among these railroads was the Denver and Rio Grande Western Railroad, the westernmost part of an Шаблон:Convert transcontinental rail network organized by Jay Gould. Jay's son and successor, George Gould, decided obtain access to the Pacific Coast. Hence, on April 3, 1903, the Western Pacific Railroad, backed heavily by Gould, was founded in San Francisco.[1]

Construction

Файл:Western Pacific in Feather River grand canyon.JPG
A Western Pacific passenger train in the grand canyon, Шаблон:Circa

Construction of the line began in 1906 and continued under harsh conditions. In the Sierra a total absence of roads, along with rockslides in the Feather River Canyon and extreme temperature fluctuation, made working conditions uncomfortable and dangerous. In the deserts of Nevada and Utah high temperature and lack of water made conditions similarly difficult; construction costs skyrocketed, nearly bankrupting the contractors building the line. Labor turnover was extremely high, due to the miserable working conditions. Nonetheless, progress inched further, although slower than anticipated, due to the challenges caused by the need for many long tunnels on the Sierra portion of the route.[1]

When the line was finished in 1909 it spanned a total of Шаблон:Convert, and had been built at the then ferociously expensive cost of $75 million (equivalent to $Шаблон:Format price in Шаблон:Inflation year). It featured a ruling grade of 1%, making it only half as steep as Southern Pacific's Donner Pass line, its primary competitor.[2]

History under the Western Pacific

Файл:1930 D&RGW WP.jpg
Combined Western Pacific/Denver & Rio Grande Western route map (Шаблон:Circa)

Шаблон:Citation needed span

Шаблон:Citation needed span

Файл:PalisadeCanyonNV.jpg
Palisade Canyon along the Humboldt River between Battle Mountain and Carlin. The Feather River Route and Overland Route run parallel on opposite sides of the river

Шаблон:Citation needed span This did not stop the Western Pacific from introducing the California Zephyr in 1949. The Zephyr, which operated over three railroads on its route between Oakland and Chicago, gained immense recognition but failed to last past the year 1970, when lack of riders and unprofitability forced the Western Pacific to abandon the service.Шаблон:Sfnp

In 1957, a portion of the route between Oroville and Intake had to be relocated to make way for the Oroville Dam.[3] The new line features the North Fork Bridge,[4][5] Шаблон:Citation needed span

Shared trackage agreement

The Feather River Route parallels the Overland Route in central Nevada between Weso (near Winnemucca) and Alazon (near Wells). The Southern Pacific Railroad and Western Pacific came to a shared trackage agreement to use directional running.[6] Eastbound trains of both companies used the tracks for the Feather River Route while westbound trains used the Overland Route.[7] In the shared track area, the tracks mostly run on opposite sides of the Humboldt River; at some points the two lines are several miles apart. Crossovers were constructed where the lines run in close proximity to allow bi-directional service to the areas previously only accessible from one of the lines, such as Battle Mountain. There is a grade separated crossover of the two lines in the shared track area near Palisade, Nevada. This results in trains following right hand traffic in the eastern half of the shared track area, but left hand traffic in the western half.[8]

By 1967, a second section of the Feather River Route was converted to directional running. The easternmost portion of the line (Shafter Subdivision), from the Kennecott Smokestack of the Bingham Canyon Mine smelting facilities to the end of the line in downtown Salt Lake City was operationally combined with the Lynndyl Subdivision of the former Los Angeles and Salt Lake Railroad for a continuous dual track into Salt Lake City. Initially this required a crossover between the two tracks. When the WP and UP merged in 1983, the crossover was eliminated.[9]

Present

Шаблон:Shafter Subdivision Шаблон:Elko Subdivision Шаблон:Winnemucca Subdivision Шаблон:Canyon Subdivision Шаблон:Sacramento Subdivision The Western Pacific was purchased by the Union Pacific Railroad in 1983. In 1996, the Union Pacific acquired the Southern Pacific, resulting in both lines between Oakland and Utah being owned by the same company.[6] After the acquisition, the Union Pacific truncated the Feather River Route to the meeting points of the two lines near Sacramento, California and Winnemucca, Nevada.

The far western portion of the line, west of Stockton, now the Oakland Subdivision, is now used by the Altamont Corridor Express. A portion of the line through downtown Sacramento is now used by the Blue Line of the Sacramento Regional Transit District. East of Winnemucca, the former Feather River Route has been combined with lines from the former Denver and Rio Grande Western Railroad to form the Central Corridor.[10]

Файл:Union Pacific freight train in the Feather River Canyon-3872.jpg
A Union Pacific freight train on its way through the Feather River Canyon in Butte County, California, in March 2022

The Western Pacific Railroad Museum, a preservation society founded in 1984, is located next to the Union Pacific rail yard in Portola, California. The remaining portion of the Feather River Route follows a corridor similar to that of State Route 70 in California and former State Route 49 in Nevada.

Points of interest

Along portions built as part of the Feather River Route that are currently assigned to other lines:

Lines served

References

Шаблон:Reflist

Шаблон:Western Pacific Railroad