Английская Википедия:Forced induction in motorcycles

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:Use mdy dates Forced induction in motorcycles is the application of forced induction (turbochargers or superchargers) to a motorcycle engine. Special automotive engineering and human factors considerations exist for the application of forced induction with motorcycles, compared to other forms of motorized transportation.

Forced induction in production motorcycles

Prior to the late 2010s, forced induction was only used on a handful of production motorcycles, all from Japanese Big Four manufacturers in the early 1980s.Шаблон:SfnШаблон:SfnШаблон:Sfn

Honda CX650 Turbo had a 674 CC, 100 BHP V-twin engine. It is contestably the best forced induction production bike of the 1980s from any Japanese manufacturer. The 1983 model Honda CX650 Turbos had solved the lag problems that earlier models like the CX500 Turbo had encountered. To rectify turbo lags capacity and compression ratio was raised from 7.2:1 to 7.8:1.Шаблон:Sfn

Additionally, in 1978 Kawasaki offered the Z1R-TC, a semi-production model built by Turbo Cycle Corporation and sold through Kawasaki dealers. This is generally considered to be the first Japanese turbocharged motorcycle.Шаблон:Sfn

The Honda, Kawasaki and Suzuki bikes were all listed on a State Farm insurance "blacklist" published by American Motorcyclist in 1989.Шаблон:Sfn

21st century

A scooter with a supercharger, the Peugeot JetForce Compressor, was available in late 2003.

Kawasaki confirmed it would be re-entering the market with the supercharged Kawasaki Ninja H2, announced in October, 2014.Шаблон:SfnШаблон:SfnШаблон:Sfn This was followed by the H2 SX SE sports tourer,Шаблон:Sfn and for 2020 Kawasaki announced a new naked model, designated Z H2.Шаблон:SfnШаблон:Sfn

Engineering and usability challenges

Designers have been able to address packaging issues and fit turbochargers even in fully faired motorcycles.Шаблон:SfnШаблон:Sfn

Turbo lag was noted as a problem with all four Japanese turbos of the 1980s by several critics.Шаблон:SfnШаблон:SfnШаблон:Sfn[1] Motorcycle engineering expert and journalist Kevin Cameron has said that turbo lag is a critical problem with turbocharger applications on motorcycles: "[U]nless you are a pure drag racer, most of your riding will be off-boost. The lower your compression ratio, the less snap your bike will have...don't expect your turbo bike to be much use in sportbike-type canyon racing."Шаблон:Sfn Using a variable-geometry turbocharger can mitigate turbo lag,Шаблон:SfnШаблон:Sfn but has not yet been used in series production (the first mass market application was to late 1980s automobiles; see Variable-geometry turbocharger#History).

Writer Mick Walker has listed turbo lag along with other challenges like a higher center of gravity and heat transfer to rider due to turbocharger and associated exhaust plumbing.Шаблон:Sfn Bennett noted excessive weight and complexity in addition to weak bottom-end performance.Шаблон:Sfn

The German magazine Motorrad said in 2014, that a turbocharger would probably never be practical on mass market motorcycles due to cost of high-tech materials able to withstand the high temperatures of a variable geometry turbocharger, plus weight and space considerations, though they left the door open for a good supercharged solution.Шаблон:Sfn

Emissions

Emissions considerations, driven in particular by carbon dioxide limits in the European emission standards, are leading motorcycle manufacturers in the 2010s to reconsider applications of forced induction.Шаблон:SfnШаблон:Sfn

In racing

In road racing, superchargers were not uncommon in the 1930s, and machines originally built for road racing also set many land speed records (see the list below for examples). Motorcycle racing in Europe went through a hiatus during the 1940s as World War II and its aftermath, and racing only restarted in 1946.Шаблон:Sfn That same year, forced induction was banned from road racing by the Fédération Internationale de Motocyclisme (FIM),Шаблон:SfnШаблон:SfnШаблон:SfnШаблон:Sfn effectively relegating it to specialized forms of racing and speed record runs, discussed further below. Rules from the FIM and other sanctioning bodies cover aspects of motorcycle design as diverse as motorcycle fairing coverage, gasoline direct injection, and the use of dual-clutch transmissions, and may influence street bike design by setting public expectations.Шаблон:Sfn

Drag racing

Specialized motorcycles used in drag racing, called dragbikes, are an application for forced induction, including nitrous oxide and multistage turbochargers.Шаблон:Sfn The first dragbike to run the quarter-mile in under 7 seconds was using a Roots-type supercharger.Шаблон:SfnШаблон:Sfn

Motorcycle clubs

At least one motorcycle club, Turbo Motorcycle International Owners Association, has been formed to support turbo motorcycle enthusiasts.Шаблон:Sfn

Notable prototypes and record setters

Файл:BMW WR 750 l 1929 TCE.jpg
BMW WR 750 from 1930s, note supercharger under rider's saddle

Шаблон:Commonscat

Notes

Шаблон:Reflist

References

Шаблон:Refbegin

Books

Periodicals

Шаблон:Refend

Further reading

Шаблон:Forced induction motorcycles

Партнерские ресурсы
Криптовалюты
Магазины
Хостинг
Разное

  1. ↑ Шаблон:Harvnb quotes an expert's dry summary of these bikes' "difficult power characteristics"
Источник — http://wikihandbk.com/ruwiki/index.php?title=Английская_Википедия:Forced_induction_in_motorcycles&oldid=14738951