Английская Википедия:Ford Capri (Australia)
Шаблон:About Шаблон:Use dmy dates Шаблон:Infobox automobile
The Ford Capri (SA30) is an automobile which was produced by Ford Australia from 1989 to 1994. The launch of the car marked a revival of the Ford Capri name, previously used by Ford of Europe from 1969 to 1986 and Ford USAs, Mercury Division, on their Fox-bodied, Mercury Capri, from 1979 to 1986.
The Australian Capri, codenamed the SA30, was an entry-level convertible, based on Mazda 323 engines and mechanicals that Ford Australia had also used in the Laser. It had a body shell designed by Ghia and an interior by ItalDesign. During development of the Capri, Mazda was developing the MX-5, a vehicle that, although considerably more expensive, was commonly considered its direct competitor.[1] Unlike the MX-5, the Capri was a 2+2 rather than a strict two-seater.
History
Шаблон:Multiple image The Australian-built Capri was intended primarily for export to the US. Exports began in 1991, as the Mercury Capri. When the car was new, it had a poor reputation for reliability,[2] although many still exist today perhaps due to the mechanical robustness of the Laser/323 upon which it was based.[3] In particular, the Capri's roof was prone to leaking, due to poor-quality materials being used; although Ford quickly resolved the issue, the car's poor reputation stuck.[2] As a result, the MX-5 was comfortably more popular, particularly as that car was rear-wheel-drive, and enthusiasts were skeptical about the front-wheel-drive arrangement that the Capri used.[2] Шаблон:Multiple image Two models were initially offered in the Capri's range: a base model, with a 1.6 L B6-2E SOHC inline-4 engine that produced Шаблон:Convert,[4] and a turbocharged model, which used the 1.6 L B6T DOHC inline-4, which produced Шаблон:Convert.[5] The base model was available with a 5-speed manual transmission or a 3-speed automatic transmission, whilst the turbocharged model only had the manual gearbox.[5] In 1990, the naturally-aspirated 1.6 L B6D DOHC unit, which produced Шаблон:Convert, was added to the range,[6] and this was the only engine available in 1991.[7]
For 1992, the Capri was updated, and given the codename SC; the turbocharged engine was also re-added to the range.[8] An XR2 trim level was also introduced for both engines, whilst the base trim for the naturally-aspirated model was renamed Barchetta, and the base trim for the turbo model renamed to Clubsprint.[8] In 1993, the Capri was updated again, and this time was given the codename SE.[9] Production ended in 1994, after a total of 66,279 Capri convertibles had been built; 10,347 of these were right-hand-drive (RHD) models for the Oceania/Southeast Asia market. 9,787 Capris were sold in Australia, whilst the remaining RHD Capris went to New Zealand and Southeast Asia.[10]
The 1989–94 Capri was assessed in the Used Car Safety Ratings 2006 as providing "worse than average" protection for its occupants in the event of a crash.[11]
References
Шаблон:Reflist Шаблон:Ford Australia timeline
- ↑ Шаблон:Cite web
- ↑ 2,0 2,1 2,2 Шаблон:Cite web
- ↑ Шаблон:Cite web
- ↑ Ошибка цитирования Неверный тег
<ref>
; для сносок1.6 spec
не указан текст - ↑ 5,0 5,1 Ошибка цитирования Неверный тег
<ref>
; для сносокgeneral spec
не указан текст - ↑ Шаблон:Cite web
- ↑ Шаблон:Cite web
- ↑ 8,0 8,1 Шаблон:Cite web
- ↑ Ошибка цитирования Неверный тег
<ref>
; для сносок1993 SE
не указан текст - ↑ Шаблон:Cite web
- ↑ Шаблон:Cite web
- Английская Википедия
- Ford Australia vehicles
- Cars introduced in 1989
- 1990s cars
- Cars of Australia
- Convertibles
- Front-wheel-drive sports cars
- Cars discontinued in 1994
- Страницы, где используется шаблон "Навигационная таблица/Телепорт"
- Страницы с телепортом
- Википедия
- Статья из Википедии
- Статья из Английской Википедии
- Страницы с ошибками в примечаниях