Английская Википедия:Hayabusa2

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:About Шаблон:Italic title Шаблон:Use British English Шаблон:Use dmy dates Шаблон:Infobox spaceflight

Шаблон:Nihongo is an asteroid sample-return mission operated by the Japanese state space agency JAXA. It is a successor to the Hayabusa mission, which returned asteroid samples for the first time in June 2010.[1] Hayabusa2 was launched on 3 December 2014 and rendezvoused in space with near-Earth asteroid 162173 Ryugu on 27 June 2018.[2] It surveyed the asteroid for a year and a half and took samples. It left the asteroid in November 2019 and returned the samples to Earth on 5 December 2020 UTC.[3][4][5] Its mission has now been extended through at least 2031, when it will rendezvous with the small, rapidly-rotating asteroid Шаблон:Mpl.

Hayabusa2 carries multiple science payloads for remote sensing and sampling, and four small rovers to investigate the asteroid surface and analyze the environmental and geological context of the samples collected.

Mission overview

Файл:Mission overview of Hayabusa2 and MASCOT.webm
Hayabusa2 mission overview animation
Файл:.Animation of Hayabusa2 orbit.gif
Animation of Hayabusa2 orbit from 3 December 2014
Шаблон:Legend2 Шаблон:Legend2 Шаблон:Legend2 Шаблон:Legend2
See detailed video including the extended mission

Asteroid 162173 Ryugu (formerly designated Шаблон:Mp) is a primitive carbonaceous near-Earth asteroid. Carbonaceous asteroids are thought to preserve the most pristine, untainted materials in the Solar System, a mixture of minerals, ice, and organic compounds that interact with each other.[6] Studying it is expected to provide additional knowledge on the origin and evolution of the inner planets and, in particular, the origin of water and organic compounds on Earth,[6][7] all relevant to the origin of life on Earth.[8]

Initially, launch was planned for 30 November 2014,[9][10][11] but was delayed to 3 December 2014 at 04:22:04 UTC (3 December 2014, 13:22:04 local time) on a H-IIA launch vehicle.[12] Hayabusa2 launched together with PROCYON asteroid flyby space probe. PROCYON's mission was a failure. Hayabusa2 arrived at Ryugu on 27 June 2018,[2] where it surveyed the asteroid for a year and a half and collected samples.[6] It departed the asteroid in November 2019 and returned the samples to Earth in December 2020.[11]

Compared to the previous Hayabusa mission, the spacecraft features improved ion engines, guidance and navigation technology, antennas, and attitude control systems.[13] A kinetic penetrator (a high-explosive shaped charge) was shot into the asteroid surface to expose pristine sample material which was later collected for return to Earth.[7][11]

Funding and history

Following the initial success of Hayabusa, JAXA began studying a potential successor mission in 2007.[14] In July 2009, Makoto Yoshikawa of JAXA presented a proposal titled "Hayabusa Follow-on Asteroid Sample Return Missions". In August 2010, JAXA obtained approval from the Japanese government to begin development of Hayabusa2. The cost of the project estimated in 2010 was 16.4 billion yen (US$Шаблон:Format price).[1][15]

Hayabusa2 was launched on 3 December 2014, arrived at asteroid Ryugu on 27 June 2018, and remained stationary at a distance of about Шаблон:Cvt to study and map the asteroid. In the week of 16 July 2018, commands were sent to move to a lower hovering altitude.[16]

On 21 September 2018, the Hayabusa2 spacecraft ejected the first two rovers, Rover-1A (HIBOU)[17] and Rover-1B (OWL), from about a Шаблон:Cvt altitude that dropped independently to the surface of the asteroid.[18][19] They functioned nominally and transmitted data.[20] The MASCOT rover deployed successfully on 3 October 2018 and operated for about 16 hours as planned.[21]

The first sample collection was scheduled to start in late October 2018, but the rovers encountered a landscape with large and small boulders but no surface soil for sampling. Therefore, it was decided to postpone the sample collection plans to 2019 and further evaluate various options for the landing.[22][23] The first surface sample retrieval took place on 21 February 2019. On 5 April 2019, Hayabusa2 released an impactor to create an artificial crater on the asteroid surface. However, Hayabusa2 initially failed on 14 May 2019 to drop special reflective markers necessary onto the surface for guiding the descent and sampling processes,[24] but later it successfully dropped one from an altitude of Шаблон:Cvt on 4 June 2019.[25] The sub-surface sampling took place on 11 July 2019.[26] The spacecraft departed the asteroid on 13 November 2019 (with departure command sent at 01:05 UTC on 13 November 2019). It successfully delivered the samples back to Earth on 6 December 2020 (JST), dropping the contents by parachute in a special container at a location in southern Australia. The samples were retrieved the same day for secure transport back to the JAXA labs in Japan.[3][27][28]

Spacecraft

Hayabusa2 Performance[29][30]
Propulsion Шаблон:Center
Number of thrusters Шаблон:Center
Total thrust (ion drive) Шаблон:Center
Specific impulse (Isp) Шаблон:Center
Acceleration Шаблон:Center
Power Шаблон:Center
Spacecraft wet mass Шаблон:Center
Ion engine system
dry mass		 Шаблон:Center
Ion engine system
wet mass		 Шаблон:Center
Solar array Шаблон:Center
Xenon propellant Шаблон:Center
Hydrazine/MON-3 propellant Шаблон:Center
Thrust (chemical propellants) Шаблон:Center

The design of Hayabusa2 is based on the first Hayabusa spacecraft, with some improvements.[6][31] It has a mass of Шаблон:Convert including fuel,[31] and electric power is generated by two sets of solar arrays with an output of 2.6 kW at 1 AU, and 1.4 kW at 1.4 AU.[31] The power is stored in eleven inline-mounted 13.2 Ah lithium-ion batteries.[31]

Propulsion

The spacecraft features four solar-electric ion thrusters for propulsion called μ10,[29] one of which is a backup. These engines use microwaves to convert xenon into plasma (ions), which are accelerated by a voltage applied by the solar panels and ejected out the back of the engine. The simultaneous operation of three engines generates thrusts of up to 28 mN.[31] Although this thrust is very small, the engines are also extremely efficient; the Шаблон:Cvt of xenon[29] reaction mass can change the speed of the spacecraft by up to 2 km/s.[31]

The spacecraft has four redundant reaction wheels and a chemical reaction control system featuring twelve thrusters for attitude control (orientation) and orbital control at the asteroid.[29][31] The chemical thrusters use hydrazine and MON-3, with a total mass of Шаблон:Cvt of chemical propellant.[31]

Communication

The primary contractor NEC built the Шаблон:Cvt spacecraft, its Ka-band communications system and a mid-infrared camera.[13] The spacecraft has two high-gain directional antennas for X-band and Ka-band.[29] Bit rates are 8 bit/s to 32 kbit/s.[31] The ground stations are the Usuda Deep Space Center, Uchinoura Space Center, NASA Deep Space Network and Malargüe Station (ESA).[31]

Navigation

The optical navigation camera telescope (ONC-T) is a telescopic framing camera with seven colors to optically navigate the spacecraft.[32] It works in synergy with the optical navigation camera wide-field (ONC-W2) and with two star trackers.[31]

In order to descend to the asteroid surface to perform sampling, the spacecraft released one of five target markers in the selected landing zones as artificial guide marks, with highly reflective outer material that is recognized by a strobe light mounted on the spacecraft.[31] The spacecraft also used its laser altimeter and ranging (LIDAR) as well as Ground Control Point Navigation (GCP-NAV) sensors during sampling.[31]

Firsts

The Hayabusa2 spacecraft was the first to deploy operating rovers on an asteroid.

Science payload

Файл:20190605 hayabusa-diagram-tpr-01.png
Hayabusa2 instrument inventory

The Hayabusa2 payload is equipped with multiple scientific instruments:[31][33]

  • Remote sensing: Optical Navigation Camera (ONC-T, ONC-W1, ONC-W2), Near-Infrared Camera (NIR3), Thermal-Infrared Camera (TIR), Light Detection And Ranging (LIDAR)
  • Sampling: Sampling device (SMP), Small Carry-on Impactor (SCI), Deployable Camera (DCAM3)
  • Four rovers: Mobile Asteroid Surface Scout (MASCOT), Rover-1A, Rover-1B, Rover-2.

Remote sensing

The Optical Navigation Cameras (ONCs) were used for spacecraft navigation during the asteroid approach and proximity operations. They also remotely imaged the surface to search for interplanetary dust around the asteroid. ONC-T is a telephoto camera with a 6.35° × 6.35° field of view and several optical filters carried in a carousel. ONC-W1 and ONC-W2 are wide angle (65.24° × 65.24°) panchromatic (485–655 nm) cameras with nadir and oblique views, respectively.[31]

The Near-Infrared Spectrometer (NIRS3) is a spectrograph operating at a wavelength of 1.8–3.2 μm. NIRS3 was used for analysis of surface mineral composition.[31]

The Thermal-Infrared Imager (TIR) is a thermal infrared camera working at 8–12 μm, using a two-dimensional microbolometer array. Its spatial resolution is 20 m at 20 km distance or 5 cm at 50 m distance (70 ft at 12 mi, or 2 in at 160 ft). It was used to determine surface temperatures in the range Шаблон:Cvt.[31]

The Light Detection And Ranging (LIDAR) instrument measured the distance from the spacecraft to the asteroid surface by measuring the reflected laser light. It operated over an altitude range between 30 m and 25 km (100 ft and 16 mi).[31]

When the spacecraft was closer to the surface than Шаблон:Cvt during the sampling operation, the Laser Range Finders (LRF-S1, LRF-S3) were used to measure the distance and the attitude (orientation) of the spacecraft relative to the terrain.[34][35] The LRF-S2 monitored the sampling horn to trigger the sampling projectile.

LIDAR and ONC data are being combined to determine the detailed topography (dimensions and shape) of the asteroid. Monitoring of a radio signal from Earth allowed measurement of the asteroid's gravitational field.[31]

Rovers

Hayabusa2 carried four small rovers to explore the asteroid surface in situ,[36] and provide context information for the returned samples. Due to the minimal gravity of the asteroid, all four rovers were designed to move around by short hops instead of using normal wheels. They were deployed at different dates from about Шаблон:Cvt altitude and fell freely to the surface under the asteroid's weak gravity.[37] The first two rovers, called HIBOU (previously Rover-1A) and OWL (previously Rover-1B), landed on asteroid Ryugu on 21 September 2018.[20] The third rover, called MASCOT, was deployed 3 October 2018. Its mission was successful.[38] The fourth rover, known as Rover-2 or MINERVA-II-2, failed before release from the orbiter. It was released on 2 October 2019 to orbit the asteroid and perform gravitational measurements before being allowed to impact the asteroid a few days later.

MINERVA-II

Шаблон:Main

Файл:Surface of Ryugu from MINERVA-II1 Rover-1A.jpg
The first photograph from the surface of an asteroid, taken by HIBOU on 22 September 2018 during one of its "hops".

MINERVA-II is a successor to the MINERVA lander carried by Hayabusa. It consists of two containers with 3 rovers.

MINERVA-II-1 is a container that deployed two rovers, Rover-1A (HIBOU) and Rover-1B (OWL), on 21 September 2018.[39][40] It was developed by JAXA and the University of Aizu. The rovers are identical having a cylindrical shape, Шаблон:Cvt diameter and Шаблон:Cvt tall, and a mass of Шаблон:Cvt each.[31][41] They move by hopping in the low gravitational field, using a torque generated by rotating masses within the rovers.[42] Their scientific payload is a stereo camera, wide-angle camera, and thermometers. Solar cells and double-layer capacitors provide the electrical power.[43][44] The MINERVA-II-1 rovers were successfully deployed 21 September 2018. Both rovers performed successfully on the asteroid surface, sending images and video from the surface. Rover-1A operated for 113 asteroid days (36 Earth days) returning 609 images from the surface, and Rover-1B operated for 10 asteroid days (3 Earth days) returning 39 images from the surface.[45]

The MINERVA-II-2 container held the ROVER-2 (sometimes referred to as MINERVA-II-2), developed by a consortium of universities led by Tohoku University in Japan. This was an octagonal prism shape, Шаблон:Cvt diameter and Шаблон:Cvt tall, with a mass of about Шаблон:Cvt. It had two cameras, a thermometer and an accelerometer. It was equipped with optical and ultraviolet LEDs to illuminate and detect floating dust particles. ROVER-2 carried four mechanisms to move around using short hops.[43] Rover-2 had problems prior to deployment from the orbiter but was released on 2 October 2019 to orbit the asteroid and perform gravitational measurements. It was then crashed onto the asteroid surface a few days later on 8 October 2019.

MASCOT

Шаблон:Redirect

Файл:SPB MASCOT 08 HiRes-cropped.jpg
Mission overview

The Mobile Asteroid Surface Scout (MASCOT) was developed by the German Aerospace Center (DLR) in cooperation with the French space agency CNES.[46] It measures Шаблон:Cvt and has a mass of Шаблон:Cvt.[47] MASCOT carries four instruments: an infrared spectrometer (MicrOmega), a magnetometer (MASMAG), a radiometer (MARA), and a camera (MASCAM) that imaged the small-scale structure, distribution and texture of the regolith.[48] The rover is capable of tumbling once to reposition itself for further measurements.[36][49] It collected data on the surface structure and mineralogical composition, the thermal behaviour and the magnetic properties of the asteroid.[50] It has a non-rechargeable battery that allowed for operations for approximately 16 hours.[51][52] The infrared radiometer on the InSight Mars lander, launched in 2018, is based on the MASCOT radiometer.[53][54]

MASCOT was deployed 3 October 2018. It had a successful landing and performed its surface mission successfully. Two papers were published describing the results from MASCOT in the scientific journals Nature Astronomy[55] and Science.[56] One finding of the research was that C-type asteroids consist of more porous material than previously thought, explaining a deficit of this meteorite type. Meteorites of this type are too porous to survive the entry into the atmosphere of planet Earth. Another finding was that Ryugu consists of two different almost black types of rock with little internal cohesion, but no dust was detected.[57][58] A third paper describing results from MASCOT was published in the Journal of Geophysical Research and describes the magnetic properties of Ryugu, showing that Ryugu does not have a magnetic field on a boulder scale.[59] Шаблон:-

Objects deployed by Hayabusa2

Object Developed by Mass Dimensions Power Science payload Landing or deployed date Status
MINERVA-II-1 rovers:
Rover-1A (HIBOU)
Rover-1B (OWL)		 JAXA and University of Aizu Шаблон:Cvt each Diameter: Шаблон:Cvt
Height: Шаблон:Cvt		 Solar panels Wide-angle camera, stereo camera, thermometers Шаблон:Center Successful landing. Rover-1A operated for 36 days and Rover-1B operated for 3 days.[45]
Rover-2 (MINERVA-II-2) Tohoku University Шаблон:Cvt Diameter: Шаблон:Cvt
Height: Шаблон:Cvt		 Solar panels Two cameras, thermometer, accelerometer. Optical and ultraviolet LEDs for illumination Шаблон:Center Rover failed before deployment, so it was released in orbit around the asteroid to perform gravitational measurements before it impacted a few days later.[60][61]
MASCOT German Aerospace Center and CNES Шаблон:Cvt Шаблон:Cvt Non-rechargeable
battery[51]		 Camera, infrared spectrometer, magnetometer, radiometer Шаблон:Center Successful landing. Operated on battery for more than 17 hours[52]
Deployable camera 3 (DCAM3) Шаблон:Center about Шаблон:Cvt Diameter: Шаблон:Cvt
Height: Шаблон:Cvt		 Non-rechargeable battery DCAM3-A lens, DCAM3-D lens Шаблон:Center Deployed to observe impact of SCI impactor. Inactive now and presumed to have fallen on the asteroid.
Small Carry-On Impactor (SCI) Шаблон:Center Шаблон:Cvt Diameter: Шаблон:Cvt
Height: Шаблон:Cvt		 Non-rechargeable battery Шаблон:Center Шаблон:Center Successful. Shot to the surface 40 minutes after separation.
Target Marker B Шаблон:Center Шаблон:Cvt Шаблон:Cvt sphere Шаблон:Center Шаблон:Center Шаблон:Center Successful. Used for first touchdown.
Target Marker A Шаблон:Center Шаблон:Cvt Шаблон:Cvt sphere Шаблон:Center Шаблон:Center Шаблон:Center Successful. Used for second touchdown.
Target Marker E (Explorer) Шаблон:Center Шаблон:Cvt Шаблон:Cvt sphere Шаблон:Center Шаблон:Center Шаблон:Center Successful. Injected to equatorial orbit and confirmed to land.
Target Marker C (Sputnik/Спутник) Шаблон:Center Шаблон:Cvt Шаблон:Cvt sphere Шаблон:Center Шаблон:Center Шаблон:Center Successful. Injected to polar orbit and confirmed to land.
Target Marker D Шаблон:Center Шаблон:Cvt Шаблон:Cvt sphere Шаблон:Center Шаблон:Center Шаблон:Center Was not deployed.
Sample Return Capsule Шаблон:Center 16 kg Diameter: 40 cm Height: 20 cm Non-rechargeable battery Sample container, Reentry flight Environment Measurement Module Шаблон:Center Successful landing. All the parts including the sample container were collected.

Sampling

Sampling Date
1st surface sampling 21 February 2019
Sub-surface sampling SCI impactor: 5 April 2019
Target marker: 5 June 2019[25]
Sampling: 11 July 2019[26]
2nd surface sampling Optional;[62] was not done.
Файл:Hayabusa hover.jpg
Artistic rendering of Hayabusa collecting a surface sample.

The original plan was for the spacecraft to collect up to three samples: 1) surface material that exhibits traits of hydrous minerals; 2) surface material with either unobservable or weak evidence of aqueous alterations; 3) excavated sub-surface material.[63]

The first two surface samples were scheduled to start in late October 2018, but the rovers showed large and small boulders and insufficient surface area to sample, so the mission team decided to postpone sampling to 2019 and evaluate various options.[22] The first surface sampling was completed on 22 February 2019 and obtained a substantial amount of topsoil,[62][64] so the second surface sampling was postponed and was eventually cancelled to decrease the risks to the mission.[62]

The second and final sample was collected from material that was dislodged from beneath the surface by the kinetic impactor (SCI impactor) shot from a distance of Шаблон:Cvt.[65][66] All samples are stored in separate sealed containers inside the sample return capsule (SRC).

Surface sample

Hayabusa2Шаблон:'s sampling device is based on HayabusaШаблон:'s. The first surface sample retrieval was conducted on 21 February 2019, which began with the spacecraft's descent, approaching the surface of the asteroid. When the sampler horn attached to Hayabusa2Шаблон:'s underside touched the surface, a Шаблон:Cvt tantalum projectile (bullet) was fired at Шаблон:Cvt into the surface.[64] The resulting ejected materials were collected by a "catcher" at the top of the horn, which the ejecta reached under their own momentum under microgravity conditions.[67]

Sub-surface sample

Файл:Hayabusa2 SCI impact and subsurface sampling.gif
Animation illustrating SCI deployment and subsequent sampling from the resulting crater.

The sub-surface sample collection required an impactor to create a crater in order to retrieve material under the surface, not subjected to space weathering. This required removing a large volume of surface material with a powerful impactor. For this purpose, Hayabusa2 deployed on 5 April 2019 a free-flying gun with one "bullet", called the Small Carry-on Impactor (SCI); the system contained a Шаблон:Cvt copper projectile, shot onto the surface with an explosive propellant charge. Following SCI deployment, Hayabusa2 also left behind a deployable camera (DCAM3)[Note 1] to observe and map the precise location of the SCI impact, while the orbiter maneuvered to the far side of the asteroid to avoid being hit by debris from the impact.

It was expected that the SCI deployment would induce seismic shaking of the asteroid, a process considered important in the resurfacing of small airless bodies. However, post-impact images from the spacecraft revealed that little shaking had occurred, indicating the asteroid was significantly less cohesive than was expected.[68]

Файл:Movie before and after touchdown on Ryugu taken with Hayabusa2's small monitor camera (CAM-H).webm
The touchdown on and sampling of Ryugu on 11 July

Approximately 40 minutes after separation, when the spacecraft was at a safe distance, the impactor was fired into the asteroid surface by detonating a Шаблон:Cvt shaped charge of plasticized HMX for acceleration.[49][69] The copper impactor was shot onto the surface from an altitude of about Шаблон:Cvt and it excavated a crater of about Шаблон:Cvt in diameter, exposing pristine material.[7][24] The next step was the deployment on 4 June 2019 of a reflective target marker in the area near the crater to assist with navigation and descent.[25] The touchdown and sampling took place on 11 July 2019.[26]

Sample return

Файл:Replica of Hayabusa capsule at JAXA i.jpg
Replica of HayabusaШаблон:'s sample-return capsule (SRC) used for re-entry. Hayabusa2Шаблон:'s capsule is of the same size, measuring Шаблон:Cvt in diameter and using a parachute for touchdown.

The spacecraft collected and stored the samples in separate sealed containers inside the sample-return capsule (SRC), which is equipped with thermal insulation. The container is Шаблон:Cvt external diameter, Шаблон:Cvt in height, and a mass of about Шаблон:Cvt.[31]

At the end of the science phase in November 2019,[3] Hayabusa2 used its ion engines for changing orbit and return to Earth.[67] Hours before Hayabusa2 flew past Earth in late 2020, it released the capsule, on 5 December 2020 at 05:30 UTC.[70] The capsule was released spinning at one revolution per three seconds. The capsule re-entered the Earth's atmosphere at Шаблон:Cvt and it deployed a radar-reflective parachute at an altitude of about Шаблон:Cvt, and ejected its heat-shield, while transmitting a position beacon signal.[31][67] The sample capsule landed at the Woomera Test Range in Australia.[5][71] The total flight distance was Шаблон:Cvt.[31]

Any volatile substances will be collected before the sealed containers are opened.[63] The samples will be curated and analyzed at JAXA's Extraterrestrial Sample Curation Center,[72] where international scientists can request a small portion of the samples. The spacecraft brought back a capsule containing carbon-rich asteroid fragments that scientists believe could provide clues about the ancient delivery of water and organic molecules to Earth.[73][74]

Файл:Jsc2021e062389.jpg
One of the facility-to-facility transfer containers (FFTC) of Hayabusa2 returned samples given to NASA by JAXA.

JAXA is sharing a portion of these samples with NASA, and in exchange, NASA will provide JAXA a percentage of a sample of asteroid Bennu, when the agency's OSIRIS-REx spacecraft returned to Earth from the space rock on 9/24/2023.[75]

Mission extension (Hayabusa2♯)

Файл:Animation of Hayabusa2 orbit - extended mission.webm
Animation of Hayabusa2 orbit – extended mission
Шаблон:Legend2Шаблон:·Шаблон:Legend2Шаблон:·Шаблон:Legend2Шаблон:·Шаблон:Legend2Шаблон:·Шаблон:Legend2Шаблон:·Шаблон:Legend2

With the successful return and retrieval of the sample capsule on 6 December 2020 (JST), Hayabusa2 will now use its remaining Шаблон:Cvt of xenon propellant (from the initial Шаблон:Cvt) to extend its service life and fly out to explore new targets.[76] As of September 2020, a fly-by of Шаблон:Mpl[77] in July 2026 and a rendezvous with Шаблон:Mpl in July 2031 were selected for the mission extension.[78][79][80] The observation of Шаблон:Mp will be a high-speed fly-by of the L-type asteroid, a relatively uncommon type of asteroid.[81] The fixed camera of Hayabusa2 was not designed for this type of fly-by. The rendezvous with Шаблон:Mp will be the first visit of a fast rotating micro-asteroid, with a rotation period of about 10 minutes.[80] Between 2021 and 2026, the spacecraft will also conduct observations of exoplanets.[82] An option to conduct a Venus flyby to set up an encounter with Шаблон:Mpl was also studied.[83][84]

Selected EAEEA (Earth → Asteroid → Earth → Earth → Asteroid) scenario:[80]

  • December 2020: Extension mission start
  • 2021 until July 2026: cruise operation
  • July 2026: L-type asteroid Шаблон:Mpl high-speed fly-by
  • December 2027: Earth swing-by
  • June 2028: Second Earth swing-by
  • July 2031: Target body (Шаблон:Mpl) rendezvous

The nickname of the Extended Mission is “Hayabusa2♯” (read “Hayabusa2 Sharp”). The character “♯” is a musical symbol that means “raise the note by a semitone”, and for this mission, it is also the acronym for “Small Hazardous Asteroid Reconnaissance Probe”. This name indicates that the Hayabusa2 Extended Mission is set to investigate small but potentially dangerous asteroids that may collide with the Earth in the future. The English meaning of the word “sharp” also highlights the extremely challenging nature of this mission, which is also reflected in the musical meaning of “raise the note by a semitone”, suggestive of raising of the rank of the mission. As the character “♯” is a musical symbol, it can be difficult to enter in practice when typing. The symbol can therefore be substituted for the “#” symbol (number sign / pound / hash) that is on computer keyboards or phones. There is no problem with the notation “Hayabusa2♯” (musical symbol) or “Hayabusa2#”.[85][86]

See also

Шаблон:Portal

Japanese minor body probes

Notes

Шаблон:Reflist

References

Шаблон:Reflist

External links

Шаблон:Commons category

Шаблон:Asteroid spacecraft Шаблон:Japanese space program Шаблон:Astrobiology Шаблон:Planetary defense Шаблон:Exoplanet search projects Шаблон:Solar System probes Шаблон:Orbital launches in 2014 Шаблон:2014 in space Шаблон:2018 in space Шаблон:2019 in space Шаблон:2020 in space Шаблон:2021 in space

Партнерские ресурсы
Криптовалюты
Магазины
Хостинг
Разное

  1. ↑ 1,0 1,1 Шаблон:Cite web
  2. ↑ 2,0 2,1 Шаблон:Cite news
  3. ↑ 3,0 3,1 3,2 Шаблон:Cite news
  4. ↑ Шаблон:Cite news
  5. ↑ 5,0 5,1 Шаблон:Cite news
  6. ↑ 6,0 6,1 6,2 6,3 Шаблон:Cite journal
  7. ↑ 7,0 7,1 7,2 Шаблон:Cite journal
  8. ↑ Шаблон:Cite magazine
  9. ↑ Шаблон:Cite web
  10. ↑ Шаблон:Cite journal
  11. ↑ 11,0 11,1 11,2 Шаблон:Cite conference
  12. ↑ Шаблон:Cite news
  13. ↑ 13,0 13,1 Шаблон:Cite news
  14. ↑ Шаблон:Cite web
  15. ↑ Шаблон:Cite news
  16. ↑ Шаблон:Cite web
  17. ↑ "hibou" is not Japanese nor abbreviation; it is the French word for owl and pronounced as such, イブー (i-boo).
  18. ↑ Hayabusa-2: Japan's rovers ready for touchdown on asteroid, Paul Rincon, BBC News 20 September 2018
  19. ↑ Шаблон:Cite web
  20. ↑ 20,0 20,1 Шаблон:Cite news
  21. ↑ MASCOT lands safely on asteroid Ryugu, Press release, DLR Press Portal, 3 October 2018
  22. ↑ 22,0 22,1 Schedule changes for the touchdown operation, JAXA, University of Tokyo and collaborators, Hayabusa2 Project, 14 October 2018
  23. ↑ Шаблон:Cite news
  24. ↑ 24,0 24,1 New Photos Show the Surprisingly Big Crater Blasted Into Asteroid Ryugu by Japan's Hayabusa2 Probe, George Dvorsky, Gizmodo, 22 May 2019
  25. ↑ 25,0 25,1 25,2 [Japan's Hayabusa2 spacecraft grabs epic close-up shot just 30 feet above asteroid], Jackson Ryan, C-net, 5 June 2019
  26. ↑ 26,0 26,1 26,2 Шаблон:Cite web
  27. ↑ Hayabusa-2 capsule located in Australian desert
  28. ↑ What's the benefit of sample-return?
  29. ↑ 29,0 29,1 29,2 29,3 29,4 Operation Status of Ion Engines of Asteroid Explorer Hayabusa2, Nishiyama, Kazutaka; Hosoda, Satoshi; Tsukizaki, Ryudo; Kuninaka, Hitoshi; JAXA, January 2017
  30. ↑ The Ion Engine System for Hayabusa2 Шаблон:Webarchive, The 32nd International Electric Propulsion Conference, Wiesbaden, Germany, September 11–15, 2011
  31. ↑ 31,00 31,01 31,02 31,03 31,04 31,05 31,06 31,07 31,08 31,09 31,10 31,11 31,12 31,13 31,14 31,15 31,16 31,17 31,18 31,19 31,20 31,21 31,22 Hayabusa2 Information Fact Sheet JAXA 29 July 2018
  32. ↑ Шаблон:Cite journal
  33. ↑ Шаблон:Cite web
  34. ↑ Шаблон:Cite journal
  35. ↑ Шаблон:Cite web
  36. ↑ 36,0 36,1 Шаблон:Cite news
  37. ↑ Шаблон:Cite journal
  38. ↑ Шаблон:Cite web
  39. ↑ Шаблон:Cite web
  40. ↑ Шаблон:Cite web
  41. ↑ Шаблон:Cite news
  42. ↑ Шаблон:Cite report
  43. ↑ 43,0 43,1 Шаблон:Cite web Шаблон:PD-notice
  44. ↑ Шаблон:Cite web
  45. ↑ 45,0 45,1 Шаблон:Cite conference
  46. ↑ Шаблон:Cite web
  47. ↑ Шаблон:Cite web
  48. ↑ Шаблон:Cite journal
  49. ↑ 49,0 49,1 Шаблон:Cite news
  50. ↑ Шаблон:Cite journal
  51. ↑ 51,0 51,1 Are Japanese hopping robots safe on asteroid Ryugu? Mike Wall, Space.com, 21 September 2018
  52. ↑ 52,0 52,1 Шаблон:Cite tweet
  53. ↑ InSight: A Geophysical Mission to a Terrestrial Planet Interior, Bruce Banerdt, Jet Propulsion Laboratory, NASA, 7 March 2013 Шаблон:PD-notice
  54. ↑ Шаблон:Cite journal
  55. ↑ Шаблон:Cite journal
  56. ↑ Шаблон:Cite journal
  57. ↑ Шаблон:Cite web
  58. ↑ Шаблон:Cite web
  59. ↑ Шаблон:Cite journal
  60. ↑ The Downlink: Station Crew Home, Hayabusa2 Deploys Rover, Jason Davis, The Planetary Society, 4 October 2019
  61. ↑ Шаблон:Cite tweet
  62. ↑ 62,0 62,1 62,2 Hayabusa2 Mission Update, JAXA Press conference on 5 March 2019, Quote/translation:
    • The second touchdown will be done inside or near the artificial crater created by SCI. (Final decision will be made after SCI operation whether or not to actually perform the second try.)
    • There is a high probability that a third touchdown will not be done.
    ※ Reason for choosing to give priority to experiments with collision equipment
    • It was judged that sample was sufficiently collected with the first touchdown.
    • There is a case in which the amount of light received by some of the optical systems of the bottom surface has decreased due to the first touchdown. There is no problem with normal operation, but a careful preliminary investigation is necessary for touchdown operation. Because it takes time to investigate, SCI operation was done first.
  63. ↑ 63,0 63,1 Bringing back a C-type asteroid sample (in Japanese), Shogo Tachibana, JAXA, 2013
  64. ↑ 64,0 64,1 Hayabusa-2: Japan spacecraft touches down on asteroid, Paul Rincon, BBC News, 22 February 2019
  65. ↑ Шаблон:Cite web
  66. ↑ Hayabusa2 Mission Schedule, JAXA, Accessed 4 October 2018
  67. ↑ 67,0 67,1 67,2 Major onboard instruments – Re-entry Capsule, Accessed: 2 September 2018
  68. ↑ Шаблон:Cite journal
  69. ↑ Шаблон:Cite journal
  70. ↑ Шаблон:Cite news
  71. ↑ What's the benefit of sample-return?, Jason Davis, The Planetary Society, 5 July 2018
  72. ↑ Extraterrestrial Sample Curation Center
  73. ↑ Шаблон:Cite web
  74. ↑ Шаблон:Cite web
  75. ↑ Шаблон:Cite news
  76. ↑ Шаблон:Cite journal
  77. ↑ 98943 (2001 CC21) – Mid-sized Apollo-class Asteroid, spacereference.org, 2019, Judy Mou and Ian Webster
  78. ↑ Шаблон:Cite news
  79. ↑ Шаблон:Cite news
  80. ↑ 80,0 80,1 80,2 Шаблон:Cite web
  81. ↑ Шаблон:Cite news
  82. ↑ Шаблон:Cite web
  83. ↑ Шаблон:Cite web
  84. ↑ Шаблон:Cite web
  85. ↑ Шаблон:Cite conference
  86. ↑ Шаблон:Cite web


Ошибка цитирования Для существующих тегов <ref> группы «Note» не найдено соответствующего тега <references group="Note"/>

Источник — http://wikihandbk.com/ruwiki/index.php?title=Английская_Википедия:Hayabusa2&oldid=15168433