Английская Википедия:Helical scan

Содержание

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Шаблон:Short description Шаблон:External links Шаблон:Infobox media Helical scan is a method of recording high-frequency signals on magnetic tape, used in open-reel video tape recorders, video cassette recorders, digital audio tape recorders, and some computer tape drives.

With this technique, magnetic tape heads (or head chips) are placed on a rotating head drum. which run the chips at high speed (or angular velocity). The tape is wrapped tightly around the drum. Either the drum and/or the tape is tilted at an angle that allows the head chips to read the tape diagonally faster, so the linear speed of the tape may be slower than the speed of the head chips, which rotate at a higher speed allowing signals to be transmitted. high frequency, such as video, are recorded. The diagonal tracks read or written using this method are known as helical tracks.

Файл:VHS head drum 1.jpg

The head drum of a Hi-Fi NTSC VHS VCR; three of the six heads face the reader. The helical path of the tape around the drum can clearly be seen.

Файл:VHS head drum 2.jpg

The same head drum with the rotating portion elevated for clarity

Файл:Rotary transformer 2.jpg

The rotating portion of the head drum showing the rotary transformer and three of the six tape heads used in this particular VCR

Types

There are several types of helical scan. These include:

• Alpha wrap (α), in which the tape is wrapped around the drum in a full, 360 degree fashion.
• Omega wrap (Ω), in which the tape is wrapped almost fully around the drum similar to the Greek letter Omega. Used in Type-C videotape recorders. The tape is wrapped 346 degrees around the drum with 270 degrees used for recording. Because of this, the vertical blanking interval of the video signal is lost and to prevent this a secondary head in a "1 1/2 head" configuration must record the interval when the video head is not reading the tape. A full frame or field of video can be recorded in a single revolution of the drum with a single head creating a single diagonal track on the tape.
• C wrap, where the tape is wrapped around the head drum in the shape of a backwards C, used in the Betacam format, uses a wrap of 200 to 300 degrees where 180 to 270 degrees are active or used for recording, similar to the U wrap which is reminiscent of an U laid on its side and is used in the U-matic format. Because the tape is not wrapped around the drum as much as with the omega wrap, two heads creating two diagonal tracks must be used to record a video frame, one field for every track and head.
• M wrap, used in VHS and the D-1 (Sony) and D-2 (video) digital videotape formats, wraps the tape around the head drum in a pattern or in a tape path reminiscent of the letter M, around the left and right side of the head drum, 250 to 300 degrees around it where 180 to 270 degrees are active or used for recording, with two heads if 180 degrees are used.
• Half wrap, used to denominate any type of wrap where the tape covers approximately 180 degrees, or half of the circumference of the drum. To record a full frame of video it requires at least two video heads, each sharing a video field.

Many helical scan cassette formats such as VHS and Betacam use a head drum with heads that use azimuth recording, in which the heads in the head drum have a gap that is tilted at an angle, and opposing heads have their gaps tilted so as to oppose each other. This eliminates the need for guard bands between the helical tracks allowing for a higher density of information on the tape.

History

Earl Edgar Masterson from RCA patented the first helical scan method in 1950. German engineer Eduard Schüller developed a helical scan method of recording in 1953 while working at AEG. With the advent of television broadcasting in Japan in the early 1950s, they saw the need for magnetic television signal recording. Dr. Kenichi Sawazaki developed a prototype helical scan recorder in 1954. Helical scan machines were demonstrated by Toshiba in 1959 and since they recorded one field of video per track, they were the first to allow video to be paused and played back at speeds other than real time. Helical scan type B and type C videotape began to be used in 1976.

Gallery

• Type B videotape video scanner head

  Type B videotape video scanner head

• Rotary head visible in a VXA computer tape drive

  Rotary head visible in a VXA computer tape drive

• VXA tape drive, alternate view of rotary head and loading mechanism

  VXA tape drive, alternate view of rotary head and loading mechanism

See also

• Type A videotape
• 1 inch type B videotape
• 1 inch type C videotape
• IVC videotape format about the IVC 2-inch helical VTR, Model 9000
• Video tape recorder (VTR)
• Vision Electronic Recording Apparatus
• Ampex 2 inch helical VTR
• Symmetric Phase Recording

External links

• Sony U.S. patent for U-matic videotape cassette, filed 1971.
• Sony U.S. patent for design of U-matic deck, filed 1971.
• video preservation and conservation museum
• The history of television, 1942 to 2000 By Albert Abramson, page 93.
• Ampex page in the Experimental TV Center