Английская Википедия:Herne Windmill
Шаблон:Short description Шаблон:Use dmy dates Шаблон:Use British English Шаблон:Infobox Windmill Herne Windmill is a Grade I listed[1] smock mill in Herne, Kent, England, that was built in 1789.
History
Herne Windmill was built by John Holman in 1789 when he was working for Sweetlove, the Wingham millwright.[2] There are records of a windmill in Herne as early as 1405.[3] The mill replaced an earlier post mill that was standing in 1511 and was marked on Philip Symonson's map of 1596, John Speed's map of 1611, Robert Morden's map of 1695, Emanuel Bowen's map of 1736 and Andrews, Drury and Herbert's map of 1769. In 1858, the mill was raised, and a two-storey brick base built underneath it. A new iron worm was fitted in 1931, replacing the old wooden one.[2] In the 1930s, the mill was working on two sails only. Frank Wootton, the miller, sought the assistance of the Society for the Protection of Ancient Buildings (SPAB), and after Rex Wailes made a report on the mill, two sails from the Black Mill, Forncett End, Norfolk were fitted by Thomas Hunt of Soham, Cambridgeshire in 1936. A new pair of sails was constructed by Hunt, the work being made possible by support from SPAB, the Duchess of Kent and Trinity House. The latter assisted as the mill was marked as a navigational landmark for shipping. The mill worked by wind until 1952, assisted latterly by a steam engine, then an oil engine. After that date, milling was done with an electric motor supplying the power.[3] Milling continued with the electric motor until 1980.[4]
On May 21, 2020. The sails were removed since the first lockdown of the COVID-19 pandemic.
Description
Шаблон:For Herne Mill has a three-storey smock on a two-storey brick base. It has four double patent sails carried on a cast-iron windshaft, housed in a Kentish-style cap. The mill is winded by a fantail. There is a stage at a level between the first and second floor.[2] The Brake Wheel is composite, with an iron centre and a wooden rim. It drives a wooden compass arm Wallower on a wooden Upright Shaft. This carries a wooden compass arm Great Spur Wheel. The mill drives three pairs of millstones overdrift.[5]
New sails were fitted in 2004. These measure Шаблон:Convert long by Шаблон:Convert wide each, with a total span of Шаблон:Convert. The work was carried out by IJP Millwrights of Binfield Heath, Berkshire.[6]
Millers
- Webb
- (Job) Lawrence & Sons (John and Edward) 1795 - 1879
- John Lawrence (nephew of Job) 1763 - 1840
- Edward Lawrence 1845 -
- Thomas Wootton 1879 - 1928
- Frank Wootton
- R C & E E Wootton
- Clive Wootton 1925 - 1980
Robert Wootton
References for above:-[2][3][7]
References
External links
- Английская Википедия
- Windmills in Kent
- Grinding mills in the United Kingdom
- Smock mills in England
- Tourist attractions in Kent
- Grade I listed buildings in Kent
- Windmills completed in 1789
- Museums in the City of Canterbury
- Mill museums in England
- Octagonal buildings in the United Kingdom
- 1789 establishments in England
- Страницы, где используется шаблон "Навигационная таблица/Телепорт"
- Страницы с телепортом
- Википедия
- Статья из Википедии
- Статья из Английской Википедии
