Английская Википедия:ICA IAR-35

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

The ICA IAR-35 is a Romanian glider designed and built in the 1980s primarily for aerobatics, though capable of general purpose use. Several production prototypes were constructed.

Design and development

The IAR-35 is an all-metal, single seat, short span glider developed for aerobatic flight. Its three spar shoulder wing, with metal ribs and bonded metal skinning, has a constant chord centre section and tapered outer panels. There is no dihedral on the centre section but 2° outboard. The whole trailing edge is occupied by all-metal, statically balanced ailerons, each fitted with an automatic trim tab. DFS (Schempp-Hirth) airbrakes extend both above and below the wings.[1]

Its fuselage is a metal semi-monocoque with aluminium alloy framing and duralumin skin. The cockpit is ahead of the wing with the pilot under a long, single piece Perspex canopy. On the underside, below the wing there is a monowheel, fitted with a brake, which retracts behind a pair of doors. The IAR-35 also has a fixed, semi-recessed tailwheel and a skid under the nose. The wing tips are protected by small, sprung balance wheels. Its fuselage becomes more slender behind the wing, mounting a conventional empennage with tall, straight edged, swept vertical surfaces and a dorsal fillet. The rudder is statically balanced and has a vertical trailing edge. A braced tailplane is mounted forward on the fin, a little above the fuselage, carrying similarly balanced elevators fitted with trim tabs.[1]

The IAR-35 first flew in May 1986.[1] Only a few were built but four remained on the Romanian civil register in 2010.[2]

Specifications

Шаблон:Aircraft specs

Шаблон:Aircontent

References

Шаблон:Reflist

Шаблон:IAR aircraft

  1. 1,0 1,1 1,2 Ошибка цитирования Неверный тег <ref>; для сносок JAWA90 не указан текст
  2. Ошибка цитирования Неверный тег <ref>; для сносок EuReg не указан текст