Английская Википедия:Inland Rail

Содержание

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Текст

Inland Rail is a Шаблон:Convert railway line under construction in Australia. Once complete, it will connect the Melbourne and Brisbane along a new route inland through Victoria, New South Wales and Queensland that allows for the use of double-stacked freight trains.

Construction of the line is divided into 13 projects, with Шаблон:Convert of new track to be built and Шаблон:Convert of existing track to be upgraded or modified. Inland Rail Pty Ltd, a subsidiary of Australian Rail Track Corporation (ARTC), is constructing the rail line on behalf of the Australian Government.

History

Early proposals

In 1889, a proposed standard gauge and partly mixed gauge line from Brisbane via Rosewood, Warwick and Wallangarra shortened the distance between Brisbane and Sydney by Шаблон:Convert.

In the 20th century, several proposals were made for an inland railway route connecting the east coast of Australia. In 1915, Prime Minister Andrew Fisher proposed a "strategic railway" connecting the South Australian city of Port Augusta to Brisbane, with connections to the New South Wales railway network, at an estimated cost of A£6,500,000. In 1979, TNT founder Ken Thomas proposed a route connecting Brisbane to Melbourne via Wallangarra, Orange and Albury, with possible connections to Adelaide and Perth.

Later proposals

In 1995, Queensland Rail detailed a $1.289 billion (equivalent to $Шаблон:Inflation billion in Шаблон:Inflation/year) proposal for an inland railway corridor connecting Brisbane and Melbourne.Шаблон:Sfn New dual gauge track would follow the existing Шаблон:Track gauge narrow gauge Main Line to Шаблон:Rws, the Western railway line to Wyreema and the Millmerran railway line to its terminus at Millmerran, with new track connecting to the Boggabilla railway line south of the New South Wales–Queensland border.Шаблон:Sfn

The route would then have continued along the Шаблон:Track gauge Mungindi railway line until Bellata, with a new line connecting the Coonamble railway line via Wee Waa before once again following existing track: the Main Western railway line to Шаблон:Rws; the Parkes–Narromine railway line to Шаблон:Rws; the Stockinbingal–Parkes railway line to Шаблон:Rws; the Lake Cargelligo railway line to Шаблон:Rws; the Main Southern railway line to Шаблон:Rws; and the North East railway line to Melbourne.Шаблон:Sfn A maximum line speed of Шаблон:Convert would be in place for the corridor, with an additional $189 million (equivalent to $Шаблон:Inflation million in Шаблон:Inflation/year) upgrade to existing track allowing for speeds of up to Шаблон:Convert in sections.Шаблон:Sfn

In 1996, the Bureau of Transport and Communications Economics (BTCE) released a working paper assessing the proposal. It found a new route would save ten hours journey time on the existing coastal route via Sydney, reducing the operating cost for operators from $23.16/tonne to $17.56/tonne,Шаблон:Sfn but would facilitate only a small increase in grain production.Шаблон:SfnШаблон:Sfn

In September 2005, the federal Department of Transport and Regional Services commissioned a feasibility study into a Brisbane–Melbourne railway link, outlining four possible 'sub-corridors' between Шаблон:Rws and Brisbane.Шаблон:Sfn In May 2008, the newly elected Rudd government allocated $15 million to the Australian Rail Track Corporation (ARTC) to develop a route alignment following the Far Western sub-corridor as detailed in the 2006 study. The corporation's preliminary analysis was released in May 2009, which showed that the cheapest version of the inland railway would cost $2.8 billion to build and would allow freight to be moved from Melbourne to Brisbane in just over 27 hours. Despite this, the analysis also found that, if operational by 2020, the project's costs would outweigh any economic benefits by up to $1.1 billion.

The ARTC's final report was released in July 2010. The report recommended a route from Junee to Melbourne via Шаблон:Rws following the North East railway line, with the route from Шаблон:Rws to Brisbane to build along a new corridor through the Toowoomba range.Шаблон:Sfn The report forecast a delivery cost of $3.688 billion, with track duplication works between Junee and Melbourne and capacity for double-stacked freight trains between Melbourne and Parkes already budgeted by the ARTC.Шаблон:Sfn

Approval and funding

The Gillard government announced forward estimates of $300 million in the 2011 federal budget commencing 2014, with the Coalition committing to the funding following the election of the Abbott government in 2013. A further $594 million was allocated to ARTC by the Turnbull government in the 2016 federal budget to purchase land for the project, with an additional $8.4 billion in funding over seven years announced in the subsequent 2017 budget.

In the 2020 federal budget, the Morrison government pledged $150 million in funding for additional grade separation works in New South Wales, conditional upon a further $37.5 million commitment from the New South Wales state government.

The proposed route was to connect the rail yard at Tottenham, Victoria with the freight yards at Acacia Ridge and Bromelton in Queensland, using a combination of new and existing standard gauge and dual gauge track. Upgrades to existing track would facilitate the use of double-stacked container trains between the three yards.

Independent Review of Inland Rail

On 7 October 2022, the Australian Government announced an Independent Review of Inland Rail, after reports of a cost blowout to a projected $31b and delay in completion to 2030-31.  

Undertaken by Kerry Schott AO, the Review report, released in April 2023, “confirmed that Inland Rail is an important project to meet Australia’s growing freight task, improve road safety and to help decarbonise our economy”. However, the Review also found “significant deficiencies in the governance and management of Inland Rail”.

The Government agreed to 19 of the Review’s recommendations, including that the route be shortened to extend from Beveridge in Victoria to Ebenezer in Queensland and that existing rail lines be used wherever possible to minimise additional impacts on the environment and communities. New intermodal terminals are also to be developed in Melbourne, at Beveridge and Truganina. A third terminal is proposed for Ebenezer, Queensland. Upgrades to existing track will facilitate the use of double-stacked container trains between the yards. Single-stacked trains will pass through Ebenezer to Kagaru to connect to the existing Sydney to Brisbane Coastal line.

The Review also recommended that Inland Rail be completed in stages, with the Government deciding to “prioritise [the] Beveridge to Parkes [section]”, by 2027. The project would also be separated from ARTC, and a subsidiary company, Inland Rail Pty Ltd was operational from early 2024 to complete the construction of Inland Rail.

Route

The route alignment extends from Beveridge in Victoria, through New South Wales to Kagaru in Queensland.

Victoria

Шаблон:Location map+ In Victoria, the Inland Rail route will follow the existing North East railway line and Albion–Jacana railway line alignment. Between Beveridge and Шаблон:Rws the line is mostly single track with several crossing loops between Шаблон:Convert and Шаблон:Convert in length. The line north of Seymour is double track, with a connection to the Oaklands railway line at Шаблон:Rws.

Initial works on the corridor commenced in May 2020 as part of the $235 million North East Rail Line Upgrade, with John Holland contracted to upgrade the track for line speeds up to Шаблон:Convert.

The work involves replacing or modifying infrastructure at 12 sites between Beveridge and Albury:

• Replacing the Beaconsfield Parade bridge at Glenrowan
• Lowering the tracks under the Murray Valley Highway bridge at Barnawartha North
• Relocating the existing track and platform on the eastern side of the Wangaratta Station to the western side of the station
• Removing the two Wangaratta Station footbridges and replacing them with a single pedestrian underpass
• Lowering the tracks and replacing the Green Street bridge at Wangaratta
• Replacing the Seymour-Avenel Road bridge at Seymour
• Relocating tracks (tracks slews), raising signal gantries and modifying overhead powerlines in numerous areas along the rail line
• Modifying Euroa Station precinct (relocating the western rail track, building a new station platform, and adding a new pedestrian underpass) and replacing the Anderson Street bridge with a vehicle underpass
• Relocating tracks at Benalla Station and removing the existing Benalla Station Approach Road overpass
• Replacing multiple road bridges at Wandong and Broadford with higher bridges structures,

New South Wales

Шаблон:Location map+From Albury, the route continues along the Main South railway line to Illabo. Initial consultations on this section of the route commenced in 2018, with upgrades planned to Шаблон:Convert of track. A new section of track is planned to be built between Illabo and Stockinbingal, Шаблон:Convert connecting the Main South railway line to the Stockinbingal–Parkes railway line and bypassing Cootamundra and the Bethungra Spiral.

The route continues along the line from Stockinbingal to Parkes, with construction works to modify sections of the Шаблон:Convert of track starting in late 2023. A further Шаблон:Convert of track has been upgraded between Parkes and Narromine, in addition to the construction of a new Шаблон:Convert connection with the Broken Hill railway line west of Parkes allowing services to connect to Adelaide and Perth.

An approximately Шаблон:Convert stretch of track between Narromine and Narrabri will be built along a new alignment, and is the longest stage of the project. A further Шаблон:Convert of existing railway between Narrabri and North Star will be upgraded, with a bypass at Camurra to remove a long hairpin.

The route then continues from North Star and the New South Wales / Queensland border with Шаблон:Convert of new track construction and Шаблон:Convert of upgrades to existing track required. This section will complete one of the key missing rail links between New South Wales and Queensland, using the non-operational rail corridor or new track to connect to the operating line running to Yelarbon.

Queensland

Following the Independent Inland Rail Review in April 2023, the Inland Rail service offering for double-staked trains in Queensland, totalling more than Шаблон:Convert, will run from the New South Wales—Queensland border to a proposed new intermodal terminal at Ebenezer. Single-stacked trains will pass through Ebenezer to Kagaru to connect to the existing Sydney to Brisbane Coastal line.

These sections will be built as dual gauge, connecting services on both the interstate standard gauge and Queensland narrow gauge networks.

South-west of Yelarbon, the Inland Rail route joins the alignment of the South Western railway line where it extends to south of Inglewood, with a new alignment connecting the now-closed Millmerran line north-east of Millmerran. New track will be built between Southbrook and Gowrie Junction, with the route bypassing Toowoomba to Helidon on a new line and then along an upgraded Western line as far east as Calvert and new line Шаблон:Convert to Kagaru.

Tunnels

There are three tunnels in Queensland, which allow for double-stack rail transport and dual gauge and single-track railway. These are:

• Teviot Range Tunnel Inland Railway - Шаблон:Convert
• Little Liverpool Range Tunnel Inland Railway - Шаблон:Convert
• Toowoomba Range Tunnel Inland Railway - Шаблон:Convert

These tunnels replace the original narrow gauge-only tunnels between Grandchester and Toowoomba with a faster and more maintainable alignment.

Construction

Chronology

In October 2018, INLink, a joint-venture between BMD Constructions and Fulton Hogan, was awarded a $310 million contract for stage 1 of the project between Parkes and Narromine. Work on the Parkes–Narromine railway line and the new Broken Hill railway line connection commenced in December 2018. More than 1,800 people were employed on the project, with works completed in September 2020.

Opposition to construction

The Narrabri and Baradine Aboriginal Land Councils have stated their opposition to the Narromine to Narrabri section of the project, planned to be built on an alignment through the Pilliga forests which contain various Aboriginal heritage sites. A route through the Pilliga forests was announced by Minister for Infrastructure, Darren Chester, in November 2017, despite initial plans by the ARTC to build the line through surrounding farmland.

Landholders and farmers have opposed several sections of the project on environmental grounds. In September 2017, Chester announced the Yelarbon to Gowrie section would be built through the Condamine River floodplain, which reached its highest recorded level in the 2010–11 Queensland floods. As a consequence, the Inland Rail project was referred to the Senate Rural and Regional Affairs and Transport References Committee in 2019, with the committee chair, Senator Glenn Sterle, critical of ARTC for a lack of consultation with communities along the alignment. Although the ARTC reaffirmed the Yelarbon to Gowrie route would remain across the floodplain, in June 2020, Deputy Prime Minister, Michael McCormack, ordered a review of the alignment.

In July 2020, the New South Wales branch of the Country Women's Association, along with the NSW Farmers' Association, commenced legal proceedings against ARTC, seeking an independent hydrology review into the Narromine to Narrabri stage of the project.

See also

• Adelaide–Darwin rail corridor, a similar north–south rail corridor connecting inland Australia
• Rail transport in Australia
• Advanced Train Management System, to be fitted to those sections not fitted with regular signalling such as centralized traffic control
• Railway tunnels in Queensland, Australia
• Шаблон:Section link

Bibliography

• Шаблон:Cite report
• Шаблон:Cite report
• Шаблон:Cite report

External links

• Submissions to Senate Inquiry into Inland Rail