Английская Википедия:Innovator Mosquito Air

Материал из Онлайн справочника
Перейти к навигацииПерейти к поиску

Шаблон:Short description Шаблон:Use dmy dates Шаблон:Use Canadian English

The Innovator Mosquito Air is a Canadian helicopter produced by Innovator Technologies of Rockyview, Alberta. The aircraft is supplied as a kit for amateur construction.[1]

Design and development

The Mosquito Air was designed to comply with the United States FAR 103 Ultralight Vehicles, including the category's maximum empty weight of Шаблон:Convert. The aircraft has a standard empty weight of Шаблон:Convert. It features a single main rotor and tail rotor, a single-seat open cockpit without a windshield, skid landing gear and a two-cylinder, air-cooled, two-stroke Шаблон:Convert Zanzottera MZ 202 engine.[1]

The aircraft fuselage is made from bolted-together 6061-T6 aluminium tubing, with a carbon fibre tail boom and support struts. Its two-bladed rotor has a diameter of Шаблон:Convert and a chord of Шаблон:Convert. The cyclic control is routed via the centre of the rotor mast and the main rotor transmission is a poly "V" belt. The aircraft has a typical empty weight of Шаблон:Convert and a gross weight of Шаблон:Convert, giving a useful load of Шаблон:Convert. With full fuel of Шаблон:Convert the payload for the pilot and baggage is Шаблон:Convert.[1]

Reviewer Werner Pfaendler describes the design as "simple, but intelligent and reliable".[1]

The Mosquito Air is the basis for the enclosed cockpit Mosquito XE.[1]

Specifications (Mosquito Air)

Шаблон:Aircraft specs

See also

References

Шаблон:Reflist

External links

  1. 1,0 1,1 1,2 1,3 1,4 Tacke, Willi; Marino Boric; et al: World Directory of Light Aviation 2015-16, page 208. Flying Pages Europe SARL, 2015. Шаблон:ISSN